Testing Equipment Dealers in Sewri, Mumbai

We are offering digital power factor meter. Meco-g has introduced a unique 4-in-1 meter for the first time. It has simultaneous measurements of volt, current, frequency and power factor (single phase and three phase balanced load). This reduces the cost of using 4 separated meters and saves space on the panel. Wiring of cables is also reduced thus effecting tremendous saving in cost.

• Resolution: 0.01mΩ

* Convinient for users dealing with battery in UPS, Car, Mobile phone, etc, High Accuracy test probe, Fit to test battery : Lead-acid, Li-ion; Ni-HM, etc, With Multimeter function.High Accuracy 4 Wire test mode, Pure AC 1KHz test.Check Battery Capacity.

4 in 1 display Rescaleable facility for Volt, Amps, Frequency High, Accuracy and Stability Small, Compact in size Microcontroller based design "MECO-G" has introduced a unique 4-in-1 meter for the first time. It has simultaneous measurements of Volt, Current, Frequency and Power Factor (Single Phase and three phase balanced load). This reduces the cost of using 4 separated meters and saves space on the panel. Wiring of cables is also reduced thus effecting tremendous saving in cost.

• Application: Industrial
• Power Source: Electric
• Voltage: 220-240 VFeatures
• Features: Higher performance, Precision engineered, Low maintenance
• Model: MC4F
• Size: 110 mm Dia
• Scale Length: 95 mm
• Frequency: 50Hz
• Body Material: ABS Plastic

Non Contact Ground Resistance Measurement No Auxiliary Electrodes Needed Data Storing Memory Data Hold, Noise Signal Ground Resistance Measurement 0.010 Ω ~ 1000 Ω Leakage Current (0.5mA ~ 30.00 A) (Model 4680BLC) Suitable for Earthing Strip of 65mm x 32mm Jaw Opening 65 x 32 mm Approx. Conductor Size Ф 65mm * 32mm Auto Ranging, Overload Indication, Low Battery Indication Continuity Loop Test, Configurable Alarm, Auto Power Off Display 4 Digit 9999 counts LCD

The Megger MRCT is a light weight, robust, portable unit used to perform demagnetization, ratio, saturation, winding resistance, polarity, phase deviation, and insulation tests on current transformers. The MRCT automatically calculates ratio errors, saturation curves, and knee points. It provides a microprocessor-controlled variable voltage and current output and precision instrumentation for automatically testing single and multi ratio CTs, reducing testing time and increasing productivity. It directly connect to multi ratio CT and perform all tests-saturation, ratio and polarity, winding resistance and insulation-on all taps with the push of a button and without changing leads. It can be controlled via Megger´s Smart Touch View Interface (STVI) controller.

We are offering product is a cationic polymer and improves ply bond and stiffness of duplex board. the product is to be added @ 2.0 kg per ton of pulp in wet end. besides this it also improves drainage on the machine.

We are a Dealer, Supplier of Selec. We stock and supply running models areMultifunction Meters, Energy Meters, Digital Panel Meters, Current Transformers, Analog Panel Meters, Line Monitoring, Current Protection, Earth Leakage, Earth Fault, Motor Protection, Pump Protection, Liquid Level Controller, Time Relays, Time Switches, Alarm Annunciator, Static Voltage Regulator, Advance Static Var Generator, Automatic Power Factor Controller, Capacitors, MiBRX, PLC-Modular, PLC-Fixed IO, Relay Modules, HMI, Industrial Communication Accessories, Drives, Industrial Power Supplies, Chargers, Solar. We are supplier in India, Mumbai, Delhi, Ahmadabad, Chennai, Pune, Nashik, Vapi, Aurangabad, Nagpur, Sangli, Satara, Ichalkarnji, Solapur, Kupwad, Kolhapur, Pimpri, Chinchwad, Jalgaon, Silvassa, Surat, Baroda, Morbi, UAE, Indore, Bhopal, Gurgaon, Faridabad, Ghaziabad, Noida, Coimbatore.  

• Brand Name: Supco

Measures Temperature, Humidity and Dew Point simultaneously. Visual alarm indication. USB Interface standard ( cable included). PC, delayed start or push button recording control. Provides concise measurement for critical environmental conditions. A Quality product from Supco, USA.

MICRO VICKERS HARDNESS TESTER Advanced Color LCD Touch Panel Operation and Display.X– Y Coordinate Display interfaced with the Digital Microhead (Option).Automatic Load and Release Method.Hardness Conversion to Other scales.

• Automatic Grade: Manual
• Application: Testing Water Level
• Feature: Accuracy, Easy To Fit
• Display Type: Analog

  Principle of Operation   Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top.For Transmitter TypeThe magnet holder attached on top of the connecting stem of the float buoys up along with the level rise and it cuts in or out a series of resistors kept sealed outside the level           Material specification   Customized suiting to the service media and op. conditionsAvailable in SS 304/ SS 316/ PP/ PVC/HDPE/ PVDF/ PTFE etc.

• Warranty: 1 Year
• Color: Black
• Weight: 900 Gm
• Operating voltage: 9V to 30V
• Outer Body: Plastic
• Dimensions: L-158mm, W-104 Mm, H-95 Mm
• Condition: New

We offer a precisely engineered Paint Panel Pressure Tester to our valuable customers. This device is made to test two panels which are kept in open-air atmosphere for 24-hours after the completion of the coating process. The two panels have to be kept under 10 minute loads under ballpoint pressure to test their adherence. With our rich industry experience for nearly two decades, we have become a prominent Paint Panel Pressure Tester Manufacturer, Exporter and Supplier in Mumbai, Maharashtra. Customers can avail our products at affordable prices.

• Capacity: 1200 N-cm or as required
• Resolution: 1 N-cm
• Display: 2 line LCD module with backlight.
• Unit: N-cm, Kg-mm, lb-in

We are main supplier of this product.

• Length: 350 mm
• Width: 450 mm
• Height: 1650 mm

  The Dart Impact Tester is used to determine mechanical properties of packaging material such as Plastic Films,Laminates and Paper. Dart Impact Tester The Dart Impact Tester determine the energy that causes packaging material to fail under specified conditions of impact of a free-falling dart. This energy is expressed in terms of the weight (mass) of the dart falling from a specified height which would result in 50 % failure of specimens tested.   Dart Assembly:   Steel Shaft Tip: 6.4 mm OD x 12.7 mm Long   Hemispherical Head: 38.1 mm ? (Diameter) Additional Stainless Steel Masses/Weights:   24 Pcs of 15.0 g ±0.1 g   05 Pcs of 15.0 g ±0.1 g Technical Specification:   Dart Drop Height - Available upto 1524 mm   Specimen Holder: Manual Clamp   An Electro-Mechanical Mechanism for releasing the dart   Power: AC 220 V 50Hz 1 Ph   Test Range: 5 gms to 2000 gms Machine Dimension:                    

Range: 0 to 2.71J , 0 to 5.24J , 0 to 10.84J , 0 to 21.68J Hammer capacity: 2.71J to 21.6J Unit: J, Jm, Jcm, ft-lbf, in-lbf, m-kgf, Nm Display: 2 line LCD display Module with Backlight Output: Serial Rs232 Power: 230VAC 50Hz MOC: SS, MS Operating Temperature Range: 0 - 50 deg centigrade.

We offer high quality analog and digital oscilloscopes that find application in various fields like educational institutes and research centers. Our highly sophisticated and high performance oscilloscopes are much in demand in the market and are preferred over similar products from our competitors. The oscilloscopes are precision engineered to provide error free measurements.  

Supplying from our facility in Mumbai(India), our organizations is a well-reckoned provider in the market. With us, payment transactions will always remain secured as we follow reliable online payment gateway that is handled by a trusted e-commerce application service provider.

Prepaid meter for High Flow and Pressure Requirement (Turbine Meters & RPD Meters). Moreover, we continuously strive to improve our product offering and increase customer satisfaction levels through technological developments and unmatched after-sales support.

• B x T: 3.0 x 0.5
• WT.GMS: 17

Multipurpose Digital Line Tester To Measure 12V to 220V AC and DC Voltage. To locate break point of an insulated wire. To check flow of current in an insulated wire from outside.

Analog Meters, interchangeable scale iron electrical meters

• Type: Frequency Meter
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Application: Frequency Monitor, Indsustrial Usage
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Fully Automatic, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic
• Power Source: Battery
• Feature: Accuracy, Durable, Lorawan Compatible, Multi Jet
• Warranty: 1Year

Digital Frequency Meter, Current Transformers, Digital Clamp Meters

TABLET DISINTEGRATION TEST MACHINENEW I.P 1985 SPL Electrically operated for finding out disintegration time of tablets. Supplied with one Basket Rack Assembly , 6 Nos. Glass Tubes 6 No. Guided Discs. One Horizontal Clamp, with 6 ft connecting cable. The machine complies with the specification as per I.P 1985 SPL. Works on 230 Volts single Phase AC 50 C/S 

Impact size, easy operation. Wide measuring range in HLD, direct display of converted hardness values in HB, HRB, HRC,HRA, HV, HS. High applicability, can be used for hardness testing of most metals. Optional printer TA230 available.Easy measurements on large & heavy workpieces.

• Application: Measuring
• Material: Metal
• Type: Magnetic Level Meter
• Current Rating (Amps): 4

SMOKE DETECTOR SENSITIVITY TESTER Reduces false alarms – a huge problem in the industry, Battery operated and easily portable, Suits most detectors – both ionization and photoelectric.