Testing Machines Dealers in Chakala, Mumbai

• Function Test bearing Durability after long period test by approving rotation rpm, time, drag load as hub bearing dynamic drag test device   • Test Iteme • Hub Bearing Durability Test • Measure Rotation torque regarding approved load   • Test Condition • Rotation rpm, Approved Load Test Time   • Cycle Time • Test Time setup function

Single & Double Pass based Optical Instruments designed for monitoring Dust and Particulate concentrations (mg/m3) in the exhaust gas of industrial combustion or Air filtration processes, offer an ideal solution to your Emissions monitoring or Process control requirement. These continuous particulate monitors use either the standard obscuration opacity technique with zero and span checking or the innovative Dynamic Detection Principle technique which eliminates the need for zero and span checking through an immunity to drift with dirty optics.

• Working Temperature: 15-25oC
• Power: 220V - 50 Hz
• Weight: 33 Kg
• Software: Windows based
• Precision: + 0.1%
• Relative humidity: <10 - 80 %
• Measurement area: 20mm

We use premium-packaging materials to safeguard our products from mechanical and environmental conditions. For our patrons, we offer customized packaging solutions as well. We are committed towards providing the world-class lot of products thus, check each and every product on different levels.

• Brand Name: Maxsell
• Weight: 31kg
• Warranty: 12 months
• Accuracy: 0.01% (Under optimized test conditions with standard samples)
• Weight: 31kgs
• Model Number: MX-GT Aurum
• Place of Origin: chennai
• Power Supply: 110V to 260V, 50/60Hz
• After-Sales Service Provided: yes
• Detector: SI Pin Diode Detector / Silicon Drift Diode (SDD) Detector
• High Voltage: 4-50 KV - Auto variable type to increase Tube Life
• Elements: Al (13) to U(92) detection range
• Testing Time: 20 - 60 Secs (30-40 Secs for best results)
• Test Area: 1
• XRay tube: Triple Stage Cooling W-Target Xray Tube
• Power Supply: 110V to 260V, 50/60Hz
• Dimension: 400(L)x660(W)x330(H)

• Dimensions LBH cms.: 43 x 47 x 40
• Weight Kgs Apx.: 36

Oil Testers are designed for the easy and accurate determination of the die-electric strength of insulating oils used in transformers, switchgears, bushings, capacitors and other electrical apparatus. They are ideal for on-site field and laboratory use., One piece construction with safety interlocked transparent hood covering test cell, Test voltage can be held at any desired level, kV meter continues to indicate breakdown voltage even after breakdown.

Universal testing machines: electronic, computerised,  analogue and  open cross head.

• Voltage: 220 V
• Country of Origin: Made in India
• Power: 2 HP
• Brand Name: Om Sai Engineering
• Usage: For Textile
• Frequency: 50 Hz
• Material: SS

The Spring Hammer consists of three principal parts : the body, the striking element and the release system. The body comprises the housing, the guide for the striking element, the release mechanism and all parts rigidly fixed thereto. The striking element comprises the hammer head, the hammer shaft and the cocking knob. The mass of this assembly is 250 g for severities not exceeding 1 J, and 500 g for 2 J. The pressure to release the striking element will not exceed 10 N.

• Type: Ultrasonic Testing Machines
• Application: Extrude PTFE Tube, Industrial
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Driven Type: Electric, Hydraulic, Mechanical
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Power: 1-3kw, 3-6kw, 6-9kw
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Output: 100-200kg/hr, 200-300kg/hr

• Feature: Toughened glass bowl for testing Jar , Toughened glass bowl for testing Jar , Air Pressure gauge & Vacuum gauge, Extremely easy to operate & maintain , Suitable for online process .

• high speed of testing: accurate
• high speed of testing: stability and heavy base of machine

We are offering servo hydraulic universal testing machine. We are pleased to introduce shimadzu analytical india pvt ltd is leading company in the field of material testing and inspection solutions. Shimadzu analytical india pvt ltd is a owned subsidiary of shimadzu asia pacific pte. Ltd singapore and incorporated in year 2006. We are an extension of our 140 years old global shimadzu family and our headquarter is in japan. Shimadzu has been serving the indian customers since many years though its established network of distributors and direct operation as well. our india head office is in mumbai and branches are in delhi, chennai, and kolkata. We provide an extensive range of material testing and inspection products; value added services and customer support. It is our top priority to understand every customer individual needs and provide personalized support with timely customized solutions for their material testing needs. We have wide customer based across india from various industries and our material testing and inspection product lineup is as below. 1) tensile testing machine – steel, rubber, plastic, packaging, pharmaceuticals, medical application testing looking forward to hear from you further and assuring our best services.

• [Features]: Speed can be set arbitrarily up to 72 km/h (20 m/sec).,The pneumatically operated specimen retaining mechanism can be easily operated.
• Testing machine capacity: 10 kN

With more and more requests being voiced for improved safety reliability in the automobile, electric and other industries, the evaluation of impact fracture properties of materials is becoming more and more important. The check point in material strength evaluation that has conventionally been only static strength has expanded to include the scope of impact fracture properties. The impact fracture properties of materials are also used in the selection of product materials and in fundamental data for quality control, being greatly applied for the purpose of improving R&D efficiency and product reliability. The impact fracture properties and materials evaluation data of fracture types such as this can be measured easily by the Shimadzu Hydroshot HITS-P10.

Compact Eco Series is table top spectrometer tool based on xray technology for measuring fast, non destructive yet accurately for precious metal and finished jewellery. The tool measure precisely and accurately element composition of jewellery alloy like gold alloy, Platinum alloy and silver alloy. Detection of fluorescence radiation by prop counter (or SI PIN) offers large sensitive area, which in turn capture large amount of fluorescence which is vital for accurate analysis of the metal. Equipped with modern, user friendly software and exact evaluation algorithm made it's operation very simple and user friendly which in turn reduce requirement of technically qualified person to operate it. Based on field experience of more than 2 decade on x Ray technology of our German principal with more than 2500 satisfied installation, made Aczet preferred manufacture being technology partner and exclusive producer for this equipment specialized to jewellery segment.These models are Fast, Accurate & Non-destructive. Fast – Ultra fast detection system for quick resultsAccurate - These XRF instruments perform material analysis & coating thickness measurement using x-ray radiation technology with modern user- friendly software which ensure accurate measurement Non Destructive - Simply position the piece of interest with the aid of a video microscope and start the measurement. The analysis is performed without any contact and destruction to the metal in about 2to3 minutes. The result is given in weight % or Karat and might be printed as a certificate.Easy to UseHighly accurate, easy-touse system will save your time and money. During the design and production process already a number of exclusive features have been incorporated into the instrument to ensure reliability, stability and high accuracy to ensure a low cost of ownership. Video MicroscopeSimply position of sample with the aid of a video microscope makes it easy to target analysis point. % & KaratThe results is given in weight % & Karat and could be printed as a certificate. Principle – High energy photons emitted by a X-ray tube interact with metal. The high energy photon is absorbed by an electron of the atom. This electron is accelerated and forced to leave the atom. This created hole in the structure of the electron shell is filled up by an electron of higher energy. The difference in energy between the leaving electrons position and the filling up electron may leave the atom as a photon of defined energy or as an electron. In the case of a leaving photon this process is called X-ray fluorescence and the energy of the leaving photon is characteristic for this atom and therefore for the element. The electron shells of an atom are called K-, L-, M-shell. Filling up a hole in the K–shell creates K–radiation (Ká if the filling up electron has is origin in the L–shell, Ká if the filling up electron has is origin in the M–shell). Filling up a hole in the L–shell creates L–radiation and so on. Only K and L radiation is on interest because the energy of K and L radiation is in the region which can be detected with standard detectors. DetectorDetecting based on Gas filled prop counter for measuring most common  alloys including gold for jewellery industry & Si-Pin analyzer detecting based on high resolution silicon  detector which is ultimate for alloys analyzing for jewellery industry including gold & silver. with even one step ahead for accuracy & repeatability compare to Gas filled prop counter. Coating ThicknessOptional module available for measuring coating thickness. Specially useful for plating & electronic industry Capability• Empirical calibration mode for calibrating unit using well assayed standard samples .• Fundamental calibration mode for standard free calibration .• Pre-Calibrations for major yellow and white Gold alloys (optional other precious alloys) .• Simultaneous quantitative measurement upto 8 elements .• Qualitative material identification up to 20 elements.• Spectrum analysis for  semi-quantitative concentration measurement.• Statistical functions with mean value, standard deviation , high/ low reading, trend line etc. APPLICATIONS: Assaying Centre / Touch Lab. Jewellery Showroom / Manufacturer Plating Thickness Hallmarking Centre Refinery Banks & Money Landers

It determines convenience of metal material’s mechanical feature. We use both In-house & outsourced equipment to conduct fatigue tests as per customer requirement. The equipment used to carry out the fatigue test is pulsator & an electrodynamic shaker.

Blood sugar testing machine a smaller size. No coding reduces handling steps, see test result averages up to 90 days, get alerts if your test strips are expired or if you’ve underdosed, re-dose within 10 seconds, set pre-and post-meal reminders to test, and more.

Description :-Abrasion testing machine is used to test crushed rock, crushed slag and uncrushed gravel for resistance to abrasion. The machine determines the resistance to wear of small size coarse aggregates and crushed rocks.Salient Features: The machine comprises of a hollow cylinder, which is horizontally mounted on a strong frame on ball bearings. The machine is supplied with abrasive charges consisting of a set of 12 hardened steel balls having approximately 48 mm diameter. The cylinder has an opening, which can be closed with a dust tight cover to promote charging and discharging the cylinder with the material under test. It consists of a detachable extension that extends throughout the interior of the cylinder and prevents it from falling on the cover. The cylinder is rotated by an electric motor through a heavy reduction gear. A revolution counter is attached to the frame and provided with tray for collection of materials at the end of the test.

• Features: Tabletop model Results are in alphanumeric LCD screen Working under optical scanning method Etc.

It is necessary to determine the length of cotton fibres so that the right length can be used for the end product - this has a direct impact on manufacturing operations. MAG Solvics' Digilen uses an optical scanning method to determine the characteristics of the fibre length. Its self diagnostic system helps check individual operations and displays results on an easy to read alphanumeric LCD screen.

We are offering diamond testing machine. Diamond and gem stone testing instrument from bruker germany testing in 60 sec

Manual testing helps discover and record any software bugs or discrepencies related to the functionality of the product.Manual testing can be replaced by test automation. It is possible to record and playback manual steps and write automated test script(s) using Test automation tools. Although, test automation tools will only help execute test scripts written primarily for executing a particular specification and functionality. Test automation tools lack the ability of decision-making and recording any unscripted discrepancies during program execution. It is recommended that one should perform manual testing of the entire product at least a couple of times before actually deciding to automate the more mundane activities of the product.Manual testing helps discover defects related to the usability testing and GUI testingarea. While performing manual tests the software application can be validated whether it meets the various standards defined for effective and efficient usage and accessibility.

Machine Applications Leak Testing Of Perfume Bottles Leak Testing Of Glass Bottles Leak Testing Of Crimped Bottles

xrf-2020r type n gold testing machine, pro automatic gold testing machine

Exceptionally fast, easy to use-Just close the lid and push a button, or point and shoot . See results in seconds on a bright, color, touch-screen display.

• Software: User friendly, Coating-thickness analysing and operating programs Results and statics data can be stored in data file. There are three seperate modules as follows. 1. Evaluation module for coating thickness and composition analysis. 2. Software m
• MODEL: StaRk
• X-Ray tube: High Performing,stable with long life tungsten tube. Spot size approx 0.5x0.5mm to assure minimal beam spread
• High Voltage: 50kV, 1.2mA (60Watt) high voltage generator, software controlled.
• Collimator: Single Collimator 0.3mmØ (optional sizes : 0.1mm, 0.2mm, 0.5mm, 0.7mm)
• Detector: Proportional Counter, Si-Pin & SDD
• Colour Video microscope: High resolution CCD color camera for optical monitoring of the measurement location with 20X zoom, Electronic cross hair with scale and beam size indication.
• Sample Focus: Motorised moving head z axis
• Laser Pointer: Laser emits through the collimator travelling the X-Ray indicating the target spot on the sample very precisely only with colimator >0.3mm
• Micro Focus X-Ray tube: X-Ray tube with tungsten target, Be window, stability and longer life, spot 85x85µ. Oil insulated air cooled, radiation safe tube shielding. single collimator 0.1mmØ
• Multi collimator: Colliamtor changer, 6 positions molarised, automatic 0.1mmØ / 0.2mmØ /0.3mmØ / 0.5mmØ / 0.05x0.05mm / 0.05x0.25mm
• Sample stage: Motorised programmable X,Y
• Power Supply: AC 110V or AC 230V, 50-60Hz
• Power Consumption: 200VA
• Usable Sample Area: 400x420mm
• Internal Chamber Dimension: 500 x 489 x 172.5mm (W x D x H)
• External Dimension: 500 x 652 x 500mm

destructive testing machine

Color Testing Machine, cleaning machines, SSD Preserving Chemical Solution

ccs testing machine, moulding press, laminating press, Hydraulic Press