Testing Machines Dealers in Dindoshi, Mumbai

We offer universal testing machine. Â� specifications and modelsï¼�auto5105 100kn â� applicationï¼�it is suitable for a variety of metallic and non-metallic materials tensile , compression , bending , shear, peel , and other mechanical properties. It is equipped with the appropriate accessories , under the high , low or normal temperature could carry out durable creep, stress relaxation materials and other material performance test.

• Capacity: 250kgf

Tensile Testing Machine is designed to test tensile strength, elongation test for Textile, plastic films, sheeting materials. This equipment can also be used for peeling, seal strength, tearing test for extension. Metal, Plastics, Rubber, Paper, Yarn, wire, foils and finished components in tension with maximum capacity up to 250kgs. Direct display of results and printout through microcontroller such as Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation at break load could be viewed on the micro controller and printout could be obtained by directly attaching a dot matrix printer to the equipment Graphic display and printout through PC with some additional results such Young’s modulus, Yield load, Yield stress and Load Vs Elongation graph.

• Power: 220 / 230 / AC 50 Hz, 450W 100 / 110V / AC 50 Hz (on Request)
• Temperature: 25.0°C to 40.0°C
• Accuracy Better than: ± 0.3°C
• Resolution: 0.1°C
• Timer range: 00:00:01 (hrs : min : sec) to 99:59:59 (hrs : min : sec)
• Stroke / min: Stroke height 55 mm, 30 strokes / min
• Water Bath: Approx. 16 liters
• Weight: Net 37 Kgs
• Dimension: 40 cm(L) x 58 cm (W) x 51.5 cm(H)
• Accessories (optional): Bolus Basket with 3 tube / 1 tube
• Documentation: IQ/OQ Documents available

Ductility testing machine, Used for determining the ductility of asphalted bitumen and fluxed native asphalt cutback bitumen and blown type bitumen. The apparatus consists of a Water Bath having inner chamber made of Aluminium and fitted with heater and a circulating pump to maintain uniform temperature. Temperature is controlled by a Thermostat Digital Temperature controller cum Indicator.

We are offering gold testing machine (cube). echnology : gas filled prop counter x-ray fluorescence technology. accurate : this system is based on x-ray radiation technology with modern user friendly software which ensure accurate measurement. calibration : pre-calibrated for gold and other precious metals. fast : ultra fast detection system for quick results. size : cube is very small in size, tanks to smart design which enables this machine fit at any place from smallest showroom to busy business area. ease : cube is very user friendly & easy to operate, doesn't require special the piece of interest with the aid of a video microscope and start the measurement. The analysis is performed non-contact and non-distructive in less than 35 sec. To 3 minutes. non-destrrutive : the analysis is performed non-contact and non-distructive in less than 35 sec. To 3 minutes. software : the cube is equipped with modern, user friendly software and exact evaluation algorism, is the proper analyser for precisely calculating the composition of solid pieces of jewellery, it also includes data acquisition, management, peak identification, spectrum analysis, report generator, statistical data control, storage & printing.

• Color: Brown, Grey, Light White, White
• Voltage: 220V, 380V, 440V
• Driven Type: Electric
• Warranty: 1year, 2years, 5 Years
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Certification: CE Certified
• Application: Cube Testing

As per IS 654 - 1992. Unit for finding strength of clay roofing tiles and Cement - Concrete flooring tiles. The apparatus consists of two parallel self aligning cylindrical steel bearers about 40 mm in Diameter. The load is applied thru a third steel bearer of similar shape placed midway between and parallel to the supports. Bearing rollers can be placed at 250 or 270 mm centre distance. This is a lever Loading Machine and the load is applied by flow of lead shots, which automatically stops when the sample breaks. The load is applied at the rate of 45 to 55 kg per minute and the accuracy of load indication is ±20%. Without Lead Shots.

For applications in the mid force range, Lloyd Instruments offers a wide range of testing machines and accessories for forces up to 50 kN. Flexible, simple to use and maintain, they provide high accuracy load measurement and are capable of a rapid 8 kHz data acquisition rate. The stand alone system can store up to 600 test results from 10 programmable test set-ups or, with PC integration with Lloyd Instruments powerful NEXYGENPlus material test and data analysis software, can perform advanced data analysis.Available models are: 5kN, 10kN, 20kN, 30kN & 50kN. Ideal for routine quality control testing or complex multi-stage tests, all machines can perform tensile, compression, flexural, peel, shear, friction tests and many more.    

Our second generation of Laray Viscometer is designed for direct viscosity results without plotting of graph or use of software. It gives an instant and in-depth analysis of viscosity measurements by using advanced automation tools to directly calculate the viscosity and other parameters. It is a sturdy design which can withstand day to day industrial use in the field of printing inks, resins and allied coatings manufacturing. It features a very simple method of calibration     Features Specification Accessories Auto / Manual mode for quick and easy operations Temperature sensor inbuilt inside the visco - Orifice for actual test temperature Instant result in ASTM D4040 or Laray calculation method Very high reproducible results Special steel used for Viscobar and Orifice for longer life and reduced wear and tear Glass rod for low viscosity fluids e.g. newsink Water-jacket around the Orifice for accurate controlling of the test temperature Sturdy design in full stainless steel with Negligible or No Maintenance Highly reliable Industrial grade electronics

• Type: Tensile Testing Machine
• Application: Testing Strength Of Material
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Black, Blue, Green, Grey, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 12-15kw, 15-18kw, 19-21kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years

Touch Screen Based system, Range Refer Specs, Load Refer Specs, Over Load Protection, Displacement Protection, Imported Ball Screw, Imported Servo Drive, USB Printer Interface

We are offering non stress test machine. features • real time graph on lcd & printer • graph plotting on any kind of plain paper • bright led display of fhr and toco • in-built analysis reporting of ctg • automatic toco zero • annotation of hospital &patient details • memory of 8hrs / 20 patients with individual patient details • separate marker for acoustic stimulator & event marker on the graph • user adjustable alarms for tachycardia & bradycardia of fhr • selective printing &description of stored data

Drop Weight Tear Testing Machine is mainly used for test of Ferrite Steels to observe Specimen Fracture Surface after impact within the Temperature that Fracture type is converted from Non-ductility to ductility.

Plastic Testing Machines, destructive testing machine, test chamber

Melting Machines CMI Series, Diode Laser Marking - Water Cooled

automobile assembling machine, x dimension machine, measuring machine

Soil Testing Machine, rock anchors, passive rock anchors