Textile Machine Dealers in Andheri, Mumbai

Infra Beaker Dyeing Machine is designed for dyeing of loose fibers / Yarns / samples in SS pot in very small quantity. It can be substitute for Glycerin Bath Beaker Dyeing Machine (H.T.H.P Beaker Dyeing Machine). As compare to Glycerin bath dyeing machine, Infra Beaker Dyeing Machine avoid the smell of heated Glycerin and heat is directly given to the potS and also measured from pot, so accuracy in process. It is less hazardous and convenient in working. infra dyeing machine heating enables efficient heating of beakers resulting in optimum dyeing conditions. as infrared radiations are used for heating there is no contamination of beakers with messy heating medium and hence the working is cleaner.more dyeing cycles are possible with infracolour as preparation and cleaning time is greatly reduced.injection dosing system is provided for making time to time additions to the beakers without opening the beakers. Variable speed roatation of beaker carriage assembly facilities dyeing of all types of fabric and yarn samples with all classes of dyes. Automation is through microprocessor programmer. Infra colour is environment friendly easy to use sample dyeing machine with infracolour there is no pollution, no smoke or bad smell in working area as is the case with conventional baths.   Features • Crease - and spot -free sample dyeing. • Low liquar ratio: 1:5 fabric dyeing cotton. • Soda ash adding without opening the beakers. • No glycerin or coolong water needed. • Optional : Filling in the powder or liquid chemical to be added later on during the dye process. • Three - dimensional movement and 360° rotation (clockwise and counterclockwise) allow even and dyed through samples. • The multi functional beaker holder allows the use of different beaker sizes.  

• Country of Origin: Made in India
• Voltage: 220 V
• Features: Strong construction , Smooth finishing, High tensile strength .
• Capacity: 500 Gram- 1000 kg
• Capacity: 500 kg
• Material: SS
• Power Consumption: 2 HP
• Dimension: 900 x 550 x 1300 mm
• Power Source: Electric

We offer Wooden Foot Roller that is highly effective in treatment of various health problems. Press your foot over the Wooden Foot Roller for 5-10 minutes on a daily basis to warm your leg and see instant relief from a variety of problems. The Wooden Foot Roller is manufactured using standard soft wood that has two wooden wheels for support to give full floor clearance, making it easy to use and store. Why Our Wooden Foot Roller? Equipped with pyramid points to recharge the bodySpecially suited for children and old peopleBest for foot relaxation and relief from painDurable instrumentsEconomical price Indications : Arthritis sciaticaLeg painGoutsDigestive system disorders Price : Rs.100- (2 USD)

• Frequency: 50-60 Hz
• Phase: Single
• Voltage: 220/440 V
• Speed: 60-120 pouch/min
• Weight: 350-750 kg

• Voltage: 220V
• Automatic Grade: Fully Automatic
• Size In Inch: 50 X 75
• Output Sheet P/M in Kick feeder: 80
• Output Sheet P/M in Chain feeder: 25-30
• Slot Depth In Inch: 18
• Weight In Kgs.: 5000, 6000, 7500, 6500, 8000

We are offering flexo printer slotter cum rotary die cutter.

• Brand Name: Farook Thread Machinery
• Voltage: 440V
• Warranty: 6 Month
• Material: Mild Steel
• Phase: 3 Phase
• Usage: Yarn Twisting
• Spindle Disc Diameter: 110 Mm 
• Spindle Speed: 12000 RPM
• Spindles: 4 Spindles
• Spindle Pitch: 130mm

• Type: Foot Massager
• Supply Ability: 5000 Unit/Units per Month
• Properties: Massager
• Model Number: IE-HS3248
• Packaging Details: Brown paper + bubble wrap + Inner 5 ply + Outer 9 ply master carton Packing as per buyer's specification will be chargeable accordingly.
• Place of Origin: India

• Driven Type: Electric
• Automatic Grade: Automatic
• Power: 1-3kw
• Application: Making Leather Products
• Voltage: 220V

We are Mumbai based manufacturer of leather products machine and cutting dies.

• Voltage: 380V
• Power: 5-7kw
• Driven Type: Electric
• Type: Automatic
• Certification: CE Certified
• Weight: 1000-2000kg
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts

Sailent Features : Machines developed with technical assistance from M/s. R.P.R. - Italy. Very rugged Cast Iron frames thus least vibration at higher speeds. Swinging type dynamically balanced spindles allowing instantaneous start & stop Highest through put speed Pot diameter ranging from 70mm to 300mm (package ranges from 900gms to above 5 kgs.) Adjustable ballon breakers-allowing to process wide range of deniers. Machines in operation for more than 20 years. Efficient Services/spares supply from the Silvassa Factory.

• Machine Type: Automatic
• Brand Name: Pack Pack India
• Model: SR-500

• Condition: New
• Material: Stainless Steel
• Color: Silver
• Usage: Industrial
• Material Capabilities: Fibre, Nonwoven

• Weight: 2.5 kg
• Features: Template and scale made up of transparent polymer plate to apply standard pressure on test specimen,Calibrated Scale to Check the Shrinkage directly up to 15%..
• Application: To measure the dimensional changes in fabrics after laundering, dry-cleaning etc
• Template length: 250, 350 and 500 mm
• Scale distance: 250, 350 and 500 mm

• Warranty: 1 year
• Voltage: 240 V
• Automatic Grade: Automatic
• Power Consumption: 0.5 HP - 1.5 HP

Are highly accurate and sturdy.Paper Roll To Sheet Cutting Machine for Various Sizes. Fully Automatic Feeding By Servo Motor for High Accuracy in Cutting Length,Available with Slitting option for directly converting Big rolls into Small Sizes. Feed Length Setting is Done through Control Panel in just Few Seconds easily.Only Slitter and sheeter or Slitter and Rewinder available.

Description :-A textile dryers is a device that is basically used to remove moisture from a chamber. Dryers are extremely useful in the textile industry for drying and setting fabrics. They play a major role in the process of textile production. Almost all solvent and water-based textile inks can be cure-dried in the dryers.Salient Features:These synthesizers are widely used in many fields. Some of the areas where they find their application are: Consists of infrared heating panels along with heat resistant Teflon coated belt. Height of the heating panels inside the chamber can be adjusted. Provided with a temperature controller for maintaining optimum temperature. There are adjustable belt speed controllers. All the components of textile dryers are made of stainless steel. There is an exhaust system to expel the moisture. The machine makes use of jet-air knives and hot air to fully cure the textile ink in the process of eliminating evaporates through the exhaust system.

WebFlex Machines is popular manufacture and exporter of Polyester Film Printing Machine. The robust construction and smooth execution of jobs are some of the salient features of this machine. UNWIND Unit: Polyester Film Printing Machine unwind unit has specially designed ball bearing assembly to accept standard cores and this is done by incorporating a shaft with tapered reel cones. We have arranged for lateral displacement with mechanical clutch at crucial points for easy operations and also to maintain perfect web tension adequate idle rollers are provided.

We make sure that there will be no damage to the products that we deliver to the customers. For this, we use high quality packaging material and hi-tech machines ensuring the same. Headquartered in Maharashtra(India), we are making available high quality products to every nook and corner of the country.

We offer Tauschen Brand Air jet looms that conforms to international standards weaving of the high quality fabric at the lowest possible cost. Clients appreciate these Looms for features like high speed, lower vibration and lower energy consumption. Additionally, it is well-equipped with the latest electronics technology such as a new internet-capable color function panel, taking today's weaving mill into a new dimension. Available in specifications:- weft insertion: single electric drum, 2-, 4-, 6-color exchange electric drum. Nominal reed space: 140 cm, 150 cm, 170 cm, 190 cm, 210 cm, 230 cm, 250 cm, 280 cm, 340 cm, 360 cm, 390 cm. Shedding: negative cam, positive cam, crank, electric shedding, jacquard. Selvage. Features: precision engineered durability high ending functionality abrasion resistance

The Drum Twister machine is designed for Laying up of Power cables round, sectorial, preformed or straight. Telephone cables in groups with out limit to the number. The machine consist of 4 Rotating Pay Offs, trumpets for core guiding, sector sensing unit, rotating die holder, taping units, filler bobbin pay-offs flange diameter 630 DIN 46395 with shoe type brake, rotating caterpillar and a rotating take up. Reel Sizes upto 4000 mm flange , both on pay off and take up can be designed, with a maximum weight of 10-15 tons. Reel loading by hydraulic lift platform mechanical.

• Features: Industry approved design , Sturdine , High durability

• Material: MS
• Country of Origin: Made in India
• Brand: Cottor
• Voltage: 340-415 V
• Usage/Application: Industrial
• Phase: Three Phase
• Power Source: Electric
• Frequency: 50-60 Hz
• Capacity: 1000 kg/8 hour

10 PROJECTILE SULZER P7100 B360 N4 SP RD1 YEAR 1990,2 PROJECTILE SULZER P7100 B390 N4 SP D1 YEAR 1988, 4 Colours,Eletronic Dobby STAUBLI 2665 with 16 levers. 5 Heald Frames,2 Weft Feeders. 4.000 Droppers & Healders.

We have excelled in the art of making top notch stenters for over 50 years.SUPRA 5 DLXiN – is specially designed to get 20% more production at a lower electrical power consumption.This is achieved with the change in airflow and heat transfer systems, and our tenter can be adapted and modelled to suit the requirements such as Finishing, Drying, Curing, Dehydration or the Heat-setting of woven and knitted fabrics.

• Operation Space: 30inch(762mm)
• Number of needles Number of needles per inch: 15/20
• Number of weft yarn rows: 3
• Motor: 1.5HP Scope of belts
• Standard: 2
• Optional guide bar: 2

WebFlex Machines is popular manufacture and exporter of Polyester Film Printing Machine. The robust construction and smooth execution of jobs are some of the salient features of this machine. UNWIND Unit: Polyester Film Printing Machine unwind unit has specially designed ball bearing assembly to accept standard cores and this is done by incorporating a shaft with tapered reel cones. We have arranged for lateral displacement with mechanical clutch at crucial points for easy operations and also to maintain perfect web tension adequate idle rollers are provided. MOTORISED REGISTER CONTROLS: In order to obtain fine registration of multi-colour prints at operational speeds we have provided Mechanical devices at operating side, which helps during cross as well as lengthwise registration. Similarly compensating roll moving up and down on linear screw system with servo motor is used for longitudinal registration or alternatively for longitudinal registration we also provide SS roll cantilevered by screw and slo syn motor and this is easily operated due to individual panel board which has individual push button controls for smooth and easy operations of the unit. Based on customer’s requirement we provide pneumatic or manual Rubber Roll Impression. Laminated Foil Printing Unit: This laminated foil printing unit is a cylindrical unit and includes removable impression rollers and doctor blade. The roller can be removed for changing, working and making it ready to use. Similarly doctor blade can be removed to sharpen and replace blades. The position and angle can be adjusted of the oscillating doctor’s knife as suitable to the diameter of the printing cylinders. We have fitted laminated foil printing unit on low friction gun metal bushing with mechanical oscillation off the gear box drive. All the units of blades have been made ready with devices for oscillation and change of angles of blade are designed to suit diameter of the cylinders. GEAR BOX: Polyester Film Printing Machine's Gear Box is spiral bevel reduction/oil immersed and fixed at the unit side frame along the machine. It has a mechanical drive for alternate transversal movement of the doctor blade. The adjustable stroke of doctor’s blade is of +/- 9mm. The special feature of Polyester Film Printing Machine’s gear box is the reverse printing facility, we have provided at few stations. REWIND UNIT: In the rewind unit printed web is coiled around the shaft made from steel alloy on a paper core, which is locked by tapered cones provided in the shaft and mounted on ball bearing assembly. Friction clutch mechanical assembly drives rewind shaft and controls the web tension and this enables perfect and tight rewinding without any stretch of the film.

• Drop Size: 5, 7, 12, 18 pl – Variable dot

Digital garment printing machine is designed for high speed textile printing, mass production printing capable of achieving 100 linear metres per hour. FD 1908 delivers a speed of 200 m2hr with a max print width of 1,850 mm and a max media width of 1,900mm. Used is a Kyocera printhead (8 heads) for excellent durability.

Spin Welding as the name implies, is a friction welding technique to join thermoplastic parts. It is essential the parts to be joined or atleast their joint areas must be circular for this method of joining to be used. A shallow Machining groove (tongue & groove) is desirable to index the two parts and to provide a uniform bearing surface.

SUPRA 5 DLXiN – is specially designed to get 20% more production at a lower electrical power consumption. This is achieved with the change in airflow and heat transfer systems, and our tenter can be adapted and modelled to suit the requirements such as Finishing, Drying, Curing, Dehydration or the Heat-setting of woven and knitted fabrics.