Thermosyphon System Dealers in Mumbai

• Material: Stainless steel, Tank : SS316, SS304, Carbon steel. Cooling coil : SS316, SS304, Copper
• Color: Silver
• Brand: Ashish Seals
• Design Pressure: 120 Bar
• Max Temp: 240 Degree C
• Model No: TSP100

Thermosyphon System Available in 7.5 liter and 10 liter. Materials of Construction are available in MS/SS304/SS316.

• Material: SS
• Capacity: 7 To 12 Liters
• Empty Weight: 32 (kg/cm)
• Life: longer service life
• TS 20 Pressure Limit: 20 bar

Applications :   Thermosyphon seal pots can be supplied as per API 610 specifications Designs based on permissible working values (depending upon actual conditions of services) Guide lines with buffer fluid water of 60°C and cooling water of 20°C Comes with limit values as per ASME Section VIII calculation Provides for high pressure sealing support

Placed in Mumbai(India), we share space with the top-notch Suppliers, domestically and offer top-of the line array of in the market. We stringently follow the safety packaging guidelines, thus we are flexible enough in delivering the products to the clients. We only use the finest packaging material to evade loss during transit.   Accessories : Pressure Gauge (0-40 kg/cm ) - To Measure the Pressure Inside Vessel Level Gauge :- To Indicate the liquid level Inside the Vessel Hand Pump - To Recharge the Thermosyphon vessel with Additional Quantity of Barrier Fluid when Thermosyphon is under Pressure and Liquid level is Low. Metal Parts - Thermosyphon Shell - Carbon Steel - SS 304/SS 316 Cooling Coil - SS 304/SS 316 Empty Weight - 32 (kg/cm ) Operating Limits : Capacity - 7.5 Litres Design Pressure - 10 bar (kg/cm 2) Hyd. Test Pressure -15 Bar (kg/cm 2) Max Working temp - 150oc Heat Transfer Area of Cooling Coil : 0.226 m Cooling Water Flow Rate Recommended : 10 Litre/min Connection   Specifications : Cooling Water Inlet - 1/2" NPT (F) Cooling Water Outlet - 1/2"NPT (F) Buffer Inlet - 1/2" NPT (F)  Buffer Outler - 1/2" NPT (F) Pressure Gauge Connection - 3/8"  NPT (F) Filling Connection - 1/2"  NPT (F) Pressure Gas Connection - 1/2" NPT (F) Refilling Connection - 1/4" NPT (F) Drain - 1/2" NPT (F)

• Material: Metal
• Color: Silver
• Usage: Industrial
• Finish: Polished
• Feature: High Strength
• Finish: Coated

Thermosyphon seal pots can be supplied as per API 610 specifications.Series STS is basicaly used as a storage & pressurising unit. This is used for double mechanical seals in back to back or tandem seal arrangement to provide necessary lubrication and cooling to the seal faces to achive recommended seal life. This is equipped with cooling coil inside the shell to bring down the temperature of barrier fluid coming fromseal to Thermosyphon

• Shape: Round
• Standard As Per: ASME - SECT. IX (USA) AD MERIL BLATTER - (European) system
• Features: 8, 10, 15, 23, liters capacity optional cooling coil available
• Construction: AISI 316 304 carbon steel al
• Optional attachments: air vent flow indicator pipes level switch bleed valve regulator pressure gauge.
• Colour: Silver

From Mumbai, we are the Thermosyphon Systems Manufacturer, Supplier and Exporter, worthy a mention. Our adept team deploys high-grade materials and ultramodern technology in order to design the API Systems that meet the highest terms of quality, durability and performance. To cater the variegated needs of the global clients, we make available the Thermosyphon Systems in tailored specifications. Plus, we never daunt from executing timely deliveries.    

Supplier & Distributor of Thermosyphon Pot. Our product range also comprises of Dry Running Agitator Seal, Multi Spring Unbalanced Seal and Spring Unbalanced Seal.   Item Code: LST1   Thermosyphon pot is use for supplying buffer fluid & pressurizing double & tandem mechanical seals. LST1 support system are equipped with all necessary connections & fittings to suits new requirements after installation. The can also be supply with refill unit to maintain the buffer fluid level during operation without disturbing the process LST1 Seal Pots can also be supplied as per API 610 specifications.

The Thermosyphon provides lubrication, dissipate heat and maintain the temperature and required pressure gradient across the seal faces in case of double back to back and tandem seal arrangement for pumps and agitators. Plan 52 and 53A configurations. Economical light and heavy duty reservoir for general service applications. Instrumentation on each reservoir is according to local standards and can be adapted to suit application and customer requirements. 304 and 316 stainless steel construction. Cooling coil is optional.

Thermosyphon system, is basically used as a storage and pressurising unit. Using thermosyphon system it is possible to supply barrier fluid to double mechanical seal in back to back or tandem arrangement. The pressure of barrier fluid is higher than the pressure of the fluid to be sealed.We have in house facility for manufacturing and supplying Thermosyphon.

• Capacity (LPD): 125, 250, 500-4C, 500-5C etc
• Collector Area (m2): 2,4,8,10 etc.

Thermosyphon Solar Water Heater relies on the natural circulation of water between the collector and the tank or heat exchanger. In this type of installation, the tank must be located above the collector. As water in the collector is heated it becomes lighter and naturally rises into the tank. Meanwhile, cooler water in the tank flows down to the bottom of the Collector, causing circulation throughout the system. These systems move household water or a heat-transfer fluid through the system without pumps. This kind of passive systems have the advantage that electricity outage and electric pump breakdown are not issues.

We are Engaged Into the Manufacturing and Supplying of Optimum Quality Thermosyphon Pot. in India, We are Immensely Famous as One of the Trustworthy Vertical Thermosiphon Pot Manufacturers. Our Thermo-siphon Pot is Primarily Use for Supplying Buffer Fluid and Pressurizing Double & Tandem Mechanical Seals. You Can Obtain These Pots At An Affordable Price from Us. item Code: Tp1

Thermosyphon Systems – Series STV – 100 Performance Limits Capacity : 7.5 Liter Hyd. Test Pressure : 30 Kg Working Pressure : 20 Kg Max. working temp.: 180°C Heat Transfer area of cooling coil : 0.3m² Cooling water flow rate Recommended: 12 Ltrs /min Max. Level Value : 5.5 Ltrs Min. Level Value : 3.5 Ltrs Metal Parts Thermosyphon Shell : Carbon Steel / SS 316/SS304 Cooling Coil: SS 304 / SS 316 Accessories Pressure Gauge (0- 40 kg/c m²) For Pressure Measuring of the vessel Level Gauge For Liquid Level Indicate of the vessel Hand Pump For recharge of the vessel With additional quantity of barrier fluid when Thermosyphon is under pressure and Liquid level is low. Connection Size: Buffer fluid Inlet – A ½” NPT Buffer fluid Outlet – B ½ NPT Cooling water Inlet – C ½” NPT Cooling water Outlet – D ½” NPT Hand Pump Connection – E – ¼: NPT (Refilling Connection) Filling Connection – F –1 ¼” NPT Pressure Gas Connection – G ½” NPT Pressure Gauge Connection – H 3/8” NPT Drain – I ½” NPT Safety Valve Connection – J ½” NPT Thermosyphon vessels can be used to provide a source of clean, Pressurized barrier fluid to Double mechanical seals in back to back and nonpressurised buffer fluid for tandem seal Arrangement. The Barrier fluid enters the Thermosyphon Vessel, where it is cooled by water circulating through cooling coil to bring down the temperature of barrier fluid and back to the seal chamber. Thermosyphon arrangement is very effective. NOTE : Thermosyphon of higher pressure can also be designed if required. Alarm system can be supplied along with Thermosyphon on demand.

Thermosyphon System for Mechanical Seal, Steam Water Heaters, fluid agitator

Thermosyphon Pot, Double Mechanical Seals, Fabricated Mechanical Seals

Thermosyphon System