Thickness Gauges Dealers in Dahisar East, Mumbai

The “AMGT-2” is a portable feeler gauge. It is used to measure the thickness of non-magnetic materials, such as plastic, glass, ceramic, aluminium, copper etc…The accuracy of the measurements is not affected by the shape of the sample.It’s designed by basing on the method of the Hall Effect. Simple and rapid as below: Place the steel ball on the side of the sample and the probe on the opposite side. Move the sample and let the probe to be the tested position. The steel ball will be drawn by the probe automatically. The Hall Effect sensor on the probe measure the distance between probe tip and the steel ball. Non-destructive measure High resolution 7* touching screen Dynamic display: measuring value/ graph/ date/ hour/ battery Full aluminium frame Fast and accurate measurement of the thickness Achieving accurate thickness measurement in corners, small radius and some irregular shape Display real-time measurement value Max and Min Mode: Automatic capture of the maximum or minimum value Value difference function: Display the value difference between preset value and actual measured value “CYCLE” function: Record the Max, Min, Average value & Graph during the predefined time.”Delayed start and Auto-stop” function frees the hands of operator and it’s convenient for large-size sample measuring. Alarm function: Programmable, warns the high or low preset value by sound or visual indication Password function enables the safety of the calibration data and measuring data Can store 9999 measuring data

• Range: 0 – 50 Micron
• Graduation: 2.5 micron

Wet Film Thickness Gauges are designed to quickly and easily measure the thickness of coatings immediately after they have been applied to a substrate. These gauges are also commonly available in Wheel type and Notch Type (known as: Combs, MIL Gauges, Step Gauges and Notched Gauges.) The wet film thickness of most organic coatings including paints, resins, lacquers, varnishes, gel coat, etc. may be measured. The thickness of powder type coatings may also be measured before curing.

• Made in USA: Yes
• Foreign Trade Code: 9017308000
• UPC: 781412708196
• Set: No
• Feeler Gauge Sizes SAE: 0.0015,0.002,0.003,0.004,0.005,0.006,0.007,0.008,0.009,0.010,

25 Pc. Long Blade Gauge Set Made in the USA - Quality and Availability Feeler Gauges Are Mostly Used in to Measure Gap Widths - the Clearance Between Two Parts For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness. Blades Are Flexible Enough That, Even If They Are All on the Same Hinge, Several Can Be Stacked Together to Gauge Intermediate Values

We are offering ultrasonic thickness gauge. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. Transducer models are available for special application, including for coarse grain material and high temperature applications. Two-point calibration function. Two work modes: single point mode and scan mode. Coupling status indicator showing the coupling status. Optional software to process the memory data on the pc. Optional thermal mini-printer to print the measured data via rs232 port.

Spline Micrometers, Morse Taper Plugs, cast iron, granite cube

Digital Hardness Testing Services, Ultrasonic Testing Services

Eddy Current Coating Thickness Tester, Digital Image Analyzer