Threaded Flanges Dealers in Kamathipura, Mumbai

Threaded Flanges Size: 12"NB TO 48"NB Threaded Flanges Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Specifications as per client requirements: ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE Threaded Flanges Grade: Stainless Steel Threaded Flange: ASTM A182 Grade : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Threaded Flange: ASTM ASME ASA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61. Alloy Steel Threaded Flange: ASTM SA 182 F1F5F9F11F22F91 Carbon Steel Threaded Flange: ASTMA 105 Gr. F42465256606570 Low Temperature Carbon Steel Threaded Flange: A350 LF2A350 LF3

Threaded Flanges are confined to special applications. Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services, particularly at or near atmospheric temperature, when alloy steel is essential for strength and where the necessary post weld heat treatment is impractical. Threaded Flanges are unsuited for conditions involving temperature or bending stresses of any magnitude, particularly under cyclic conditions, where leakage through the threads may occur in relatively few cycles of heating or stress; sea welding is sometimes employed to overcome this, but cannot be considered as entirely satisfaction. Key Features: Can be attached to the pipe without welding (sometimes an additional seal weld is used as well) Ideal for higher pressure and temperature applications for small pipe sizes Not recommended for larger loads, especially when subjected to higher torque Uses of threaded flanges: Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded. They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible. They are ideal for small diameter piping applications. They are economical and time saving devices. These threaded flanges are normally designed for non-cyclic applications. The flanges are suitable to be used in applications where welding is hazardous. They can be used in highly explosive areas.

• Size: 1/2" (15 NB) to 48" (1200NB)
• Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
• Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
• Flange Face Type: Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
• BS: BS4504 , BS4504, BS1560, BS10
• DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629

• Shape: Round
• Color: Gray
• Thickness: 5-10mm
• Material: Metal
• Feature: Durable
• Condition: New
• Surface Finishing: Polished

• Size: 1/2 TO 24NB
• Type: THREADED FLANGE
• Brand Name: FLANGE
• Material: FORGING

We are offering threaded flanges, ss threaded flange quality-304,304l,316,316l,etc. Flange dimensions-asa150class,asa300,asa600,asa900,asa1500,asa2500class,etc. Sizes-12 to 24nb we manufacture.

• Brand Name: Melisi-Italy / Ulma-Spain

we are offering threaded flanges. threaded flanges look very similar to slip-on flanges but the main difference is that the threaded flange has been was bored out to match a specific pipe inside diameter. the backside of this center opening is then threaded with the relevant-sized tapered pipe thread. threaded flanges can be used in very high pressure services and their major advantage is that they can be assembled without welding. size : 12"nb to 60"nb in class : 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs, 2500 lbs din standard nd-6,10, 16, 25, 40 etc. specifications as per the international standard astm, asme, api, aisi, bs, ansi, din, jis, mssp, nace value added services hot dip galvanizing , epoxy coating, test certificate mill test certificate as per en 10204 3.1b

We are one of the key exporters, manufacturers and suppliers of Threaded Flanges from Mumbai, Maharashtra. We provide the Threaded Flange in different grades of material such as carbon steel, stainless steel and forged steel. The specifications of these flanges are pretty much similar to the slip-on flanges in outline. The bore of the flanges is threaded that ensures assembly without any welding. However, this will limit its application to those relatively low pressure piping systems. There are customers who desire the welding around the joint post the assembly however it is not a satisfactory method of accentuating the flanges' pressure applications. It is convenient to use the threaded flange in low pressure conditions. Our products are as per the requisite industry standards and the size usually varies from 1/2-78 inch. These threaded flanges can be used in Water System, Pipe Projects, Natural Gas, Shipbuilding, Oil Field, Electric Power, Offshore, etc.   Specification : Threaded Flange, Screwed Flange Threaded Flanges (Screwed flanges)are similar to slip-on flanges in outline, but the bore is threaded, thus enabling assembly without welding. This obviously limits its application to relatively low pressure piping systems. Threaded Flanges may be welded around the joint after assembly, but this is not considered a satisfactory method of increasing the flanges' pressure applications. Threaded flange use in low press condition usually. B16.5 Threaded 150lb Flange B16.5 Threaded 300lb Flange B16.5 Threaded 600lb Flange B16.5 Threaded 900lb Flange B16.5 Threaded 1500lb Flange B16.5 Threaded 2500lb Flange   Description of Threaded Flange, Screwed Flange : Type : Threaded Forged / Cast Flange Material : Carbon steel: A105,SS400,SF440 RST37.2,S235JRG2,P250GH,C22.8, Stainless Steel: F304 F304L F316 F316L 316Ti, Copper etc. Standard : ANSI,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820 Size : 1/2-78 inch (DN15-DN2000) Pressure : ANSI class 150,300,600,1500,2500, DIN PN6,PN10,PN16,PN25,PN40,PN64,PN100,PN160 Packing : No Fumigate or Fumigate Plywood/Wood Pallet or Case Surface Treatment : Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc,Hot dipped Galvanized. E-catalogue : Available , please visit catalogue of flange Usage : Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.

Carbon Steel Threaded Flanges of Threaded Flanges that are fabricated using high grade material. These are widely used in special circumstances with their main advantage being that they can be attached to the pipe without welding.

Stainless steel Threaded Flange: ASTM A182, Astm A240Threaded Flange Grade: F 304, F 304L, F 304H, F 316, F 316L, F 316Ti, F 310, F 310S, F 321, F 321H, F 317, F 347, F 347H, 904L,Threaded Flange size: 1/8" NB TO 48"NBClass: Threaded Flange class 150, Threaded Flange class 300, Threaded Flange class 400, Threaded Flange class 600, Threaded Flange class 900, Threaded Flange class 1500 and Threaded Flange class 2500

• Size: 10-20 Inch, 20-30 Inch, 30-40 Inch, as Per Requirement
• Thickness: 10-20mm, 20-30mm, 40-50mm, as Per Requirment
• Color: Silver, Dark Black
• Finishing: Polished, Non Polished, Mill Finish
• Packaging Type: Shrink Wrapping, Bubble Wrapping, Wooden Boxes, Carton
• Outer Diameter: 30-50mm, 50-80mm, 80-120mm, as Per Requirement
• Inner Diameter: 10-20mm, 20-40mm, 40-60mm, as Per Requirement
• Unit Length: 3-6m, 6-12m, 12-18m
• No. of Holes: 4-8 Holes, 8-12 Holes
• Application: Industry Use, Fittings Use, Electric Use
• Specialities: Superior Finish, Strong Construction, Rust Proof, Perfect Shape, High Strength, Fine Quality, Durable
• Type: Threaded Flanges
• Material: Stainless Steel
• Shape: Round
• Certification: ISO 9001:2008
• Technics: Forging
• Pressure: High Pressure
• Standard: ANSI B16.5
• Country of Origin: India
• Flange Type: Threaded
• Corrosion Resistant: Yes

As quality is our topmost concern, we give maximum priority to the stringent checking of the entire range of products. Our team members make it possible to conduct online transactions, keeping the details confidential. Our transactions are completely crystal clear and thus, you can trust on us.Features : Optimum Elevated durability Fine finish Precise design Reliable

• Manufacturer: Parmanu Dhatu Nigam
• Manufacturer Brand: Padhni
• Metal - Alloy: Alloy
• Product Name: Hypocore Alloy Plate
• Padhni Grade: Hypocore Alloy UNS
• Hypocore Alloy Shape: Block Ingot Plate
• Size Width: 500MM - 3000MM
• Size Length: 1000MM - 12000MM
• Size Thickness: 10MM - 3000MM

• Brand Name: Maxell Steel & Alloys
• Material: Stainless steel, alloy steel, carbon steel, cast iron etc.
• Place of Origin: Mumbai  
• Unit: Trader
• Packaging: Bulk

We offer nickel alloy threaded flanges. Materials used: stainless steel, alloy steel, carbon steel, cast iron, steel, aluminum, brass, bronze, monel, pvc, thermoplastic etc. materials : nickel alloy threaded flanges standard: alloy steel threaded flanges - as threaded flanges astm sa 182 f1f5f9f11f22f91 carbon steel threaded flanges - cs threaded flanges astma 105 gr. F42465256606570 low temperature carbon steel threaded flanges - ltcs threaded flanges a350 lf2a350 lf3 value added services hot dip galvanizing - electro polish test certificate mill test certificate as per en 10204 3.1b duplex stainless steel : duplex stainless steel threaded flanges - duplex ss threaded flanges astm a 182 - threaded flanges f 51 uns s31803 threaded flanges s32750 threaded flanges s31500 threaded flanges astm asme asa 182 uns threaded flanges f 44 threaded flanges f 45 threaded flanges f51 threaded flanges f 53 threaded flanges f 55 threaded flanges f 60 threaded flanges f 61 threaded flanges carbon steel threaded flanges - cs threaded flanges astm a105 threaded flanges astm a 694-f42 threaded flanges f46 threaded flanges f52 threaded flanges f60 threaded flanges f65 threaded flanges f70 threaded flanges copper nickel threaded flanges - cu-ni threaded flanges

ASME Threaded Flanges, ASTM Threaded Flanges, Stainless Steel Threaded Flanges, Duplex Steel Threaded Flanges, Monel and Inconel Threaded Flanges, Alloy Steel Threaded Flanges Manufacturer and Exporter in India. ASTM/ASME – A 182, SA 182, ASTM B247, B361, Aluminum Threaded Flanges, Carbon Steel Threaded Flanges, Nickel Alloy Threaded Flanges, supplier.Shasan Piping Solution is a specialist maker of high caliber of strung spines. They are finally utilized as a part of funneling frameworks by method for having low weight, subsequent to no welding is unstable amid interfacing these ribs to the channels or different gadgets. Strung Flanges without a doubt put a roof on its capacity to modestly low weight funneling frameworks. More or less, these Flanges are being utilized to associate other strung parts in non-basic and low weight applications. In the mean time, these ribs can be joined to the channel with no welding and is proper in particularly hotheaded ranges where welding is slippery.Range :½” (15 NB) to 60” (1500NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. available with NACE MR 01-75.Features : Dimensional accuracy High efficiency Corrosion resistance Durable Excellent finish Details : Stainless Steel Standard  - ASTM / ASME A/SA 182 Grade - F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Titanium Standard  - ASTM B381. Grade - Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23 Duplex Steel Standard  - ASTM / ASME A/SA 182 Grade - F 44, F 45, F51, F 53, F 55, F 60, F 61 Copper Alloy Standard  - ASTM / ASME SB 61 / 62 / 151 / 152. Grade - UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640 Nickel Alloy Standard  - ASTM / ASME SB 564 / 160 / 472 Carbon Steel Standard - ASTM A 105/A694/ A350 LF3/A350 LF2. Grade - F42/46/52/56/60/65/70 Low Temperature Carbon Steel ASTM A 350 LF2 / A350 LF3 Alloy Steel Standard  - ASTM A182 Grade - F1/F5/F9/F11/F22/F91 Nickel Alloy Standard : Nickel 200 – UNS N02200 Nickel 201 – UNS N02201 Monel 400 – UNS N04400 Monel K500 – UNS N05500 Inconel K600 – UNS N06600 Inconel 601 – UNS N06601 Inconel 625 – UNS N06625 Inconel 800 – UNS N08800 Inconel 800H – UNS N08810 Inconel 825 – UNS N08825 Hastelloy C276 – UNS N10276 Alloy 20 – UNS N08020

• Size: 10-20inch
• Material: Stainless Steel
• Thickness: 10-20mm, 20-30mm
• Usage: Electric Use, Fittings Use
• Color: Silver
• Finishing: Polished
• Specialities: Perfect Shape, Rust Proof

We specialize in offering a supreme range of Threaded Pipe Flanges in the market at nominal rates. We are counted amongst the major exporters and suppliers of Threaded Pipe Flanges, and our team of over 250 workers fabricates the flanges by using approved material sourced from trusted vendors in the market. While procuring, we pay special attention to ensure that the flanges are defect-free, and possess a minimum level of impurities. As per the requirements of our valued clients, we offer the Threaded Pipe Flanges in various sizes and dimensions. We are based in Mumbai, Maharashtra, India.   Details : This is similar to a slip-on flange in outline, but the bore is threaded, thus enabling assembly without welding. This obviously limits its application to relatively low pressure piping systems. The flange may be welded around the joint after assembly, but this is not considered a satisfactory method of increasing its applications.

• Type: Threaded Flanges
• Material: Metal
• Shape: Round
• Size: ½”nb to 48” Nb or 15mm to 1200mm
• Standards: Ansi B16.5, Ansi B16.47 Series A& B, Mss Sp44, Asa, Api-605, Awwa, Custom Drawings
• Face Type: Flat Face, Raised Face, Rtj, Etc

Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe. This type of joint connection is Speedy and simple but not suitable for high presser and temperature applications. Threaded Flanges are mostly used in utility services such as air and water.   Pressure ratings – Class 150, Class 300, Class 600, Class 900, Class 1200, Class 1500, Class 2500, Table C, Table D, Table D, Table F, Table H, Table J, PN6, PN10, PN14, PN16, PN20, PN25, PN40 & AS PER Custom Drawings.

Backed by our team of dexterous professionals, we have emerged as a successful Manufacturers, Exporters and Suppliers of Threaded Flange. Our range of flanges can be easily installed in highly dangerous areas where welding is hazardous. In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of these in our spacious warehouse. Details : A threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding. This feature makes it preferable for services operating at low pressures and ambient temperatures.

            TYPES ANSI B 16.5 Class 150   ANSI B 16.5 Class 300   ANSI B 16.5 Class 600 ANSI B 16.5 Class 900   ANSI B 16.5 Class 1500   ANSI B 16.5 Class 2500   Note : The thread conforms to ASME B1. 20.1 NTP threads as described in Section 10. (The only exceptions are small male and female plain face threaded flanges which use NPSL locknut threads) Class 300 and higher threaded flanges are counter-bored. Threads are chamfered to the counterbore at an angle of 450 (approx) Weights are based on manufacturer's data and are approximate

Based in Maharashtra, India, we are one of the renowned manufacturers, wholesale suppliers and exporters of Threaded Flanges. We offer cost effective and qualitatively superior Threaded Flanges which are known in the market for their high performance and durability. Our Threaded Flanges are used for special requirements to work under high temperature and pressure, making sure no welding joint is made at the assembly. These products are tested on all parameters to ensure smooth functioning. We offer Threaded Flanges at market competitive rates.   Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : These flanges are used in special requirements to work under high temperature and pressure, making sure no welding joint is made at the assembly.

As one of the leaders amongst Manufacturers, Stockist, and Exporters of Raised Face Threaded Flange, ASME B16.5 / ANSI B16.47 Threaded Flange, We are offering competitive prices in India on DIN Threaded Flange, Series A & B THRF Flanges, MSS Threaded Flange. We keep adequate stock of SS Threaded Flanges, Alloy Steel Threaded Flanges, Nickel Alloy 200 TH Flange, Carbon Steel Threaded Flange, Inconel Threaded Flange, Hastelloy Threaded Flange, Copper Nickel THRF Flanges, Duplex & Super Duplex Threaded Flange, Alloy 20 Threaded Flange in all Dimensions to satisfy any small and large quantity orders from our valuable customers. What is a Threaded Flanges Threaded Flanges are also known as a screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe. Threaded Flanges are mostly used in utility services such as air and water. The benefit of these Threaded Pipe Flanges is that it can be attached without welding. When a raised face is necessary for threaded pipe flanges, the standard height is 1/16? for threaded pipe flanges under 400#. For threaded pipe flanges of 400# and up, the standard threaded pipe flange raised face height is 1/4?. M P Jain Tubing Solutions LLP welcome small and large quantity orders and are capable of manufacture Threaded Flanges according to drawings provided by customers. Since 1972 we are in this business and Manufacturing Threaded Flanges in different standards like ANSI, ASME, BS, DIN, API. Product Supplied by us are accepted by Client’s in various industries small basic industries such as Textile, Paper, Engineering, Sugar, Dairy, Cement to more complex such as Petrochemical, Oil & Gas, Power, Onshore & Offshore ETC. Our main export market is Bahrain, Bangladesh, Iraq, Japan, Jordan, Kazakhstan, Lebanon, Myanmar, Oman, Philippines, Qatar, Saudi Arabia, Sri Lanka, Thailand, Turkey, UAE, Uzbekistan etc.