Threaded Inserts Dealers in Mumbai

  We manufacture a wide range of brass inserts, which are available in different outer surfaces like Straight Knurling, Diamond knurling and Crossed knurling for better grip in plastic moulding. Also Brass Hex Inserts are available in our product range for customer’s special requirement. We also manufacture inserts as per customer's design and specifications. The inserts are available in sizes from 2 mm to 50 mm diameter. The inserts are available in different finishes like Brass natural, Electro-Tinned and Nickel plating.  

We offerhex inserts are made of high quality alloy steel duly hardened & blackened. These are available in different size as per drawing

• Material: Mild Steel
• Type: Ball Plunger
• Size: 3 - 20 mm
• Packing: Box, Carton, Packet
• Surface: Polished
• Head Shape: Hex

Brass Insert These fittings furnished with exact measurements are utilized as a part of different businesses like car, pharmaceutical, plastic, concrete and so forth. We likewise give alter our range in light of the customer's determinations.

• Size: 2 inch
• Packaging Type: Packet
• Material: MS
• Country of Origin: Made in India
• Application: Industrial

• Material: Brass
• Type: Brass Moulding Insert
• Feature: Good Quality, Highly Durable, Strong Fitting
• Standard & Specification: Developed specifically as per customer's mould design & requirements

Head Type Available: Helical Knurled Inserts, Tappex Type Inserts, Press In Type Inserts, Diamond Knurled Inserts, Press in Inserts with Collar Head, Press in Inserts for Hot & Cold Dip, Threaded Inserts, Screw Inserts, Wood Inserts, Precision Inserts, Microsert (Insert Nut for Post Heat Insertion), Unidirectional Knurling Inserts, Straight Knurling Inserts. Size: Threaded Size- M2 to M50 & similar in Inches 1/4” to 2”         Standard & Specification: Developed specifically as per customer's mould design & requirements Material Specification: CW614N (CuZn39Pb3), CW617N (CuZn40Pb2), CW602N(CuZn36Pb2As), CW511L (CuZn38As), Cuphin (CuZn21Si3P) or as per customer requirement.                                * No-Lead manufacturing also available

• Size: M3 TO M20
• Country of Origin: Made in India
• Material: Stainless Steel
• Place of Origin: INDIA
• Packaging Type: BOX
• Quantity Per Pack: 100

• Size: 10-20mm, 20-30mm, 30-40mm
• Type: Threaded Adator
• Material: Plastic
• Application: Industrial
• Feature: Good Quality
• Finishing: Polished
• round: Round

Our Female Threaded Adator with Metal Insert is manufactured using high grade stainless steel which is SS 304. Female Threaded Adator with Metal Insert that we offer is available in different sizes like 20x1/2, 25x3/4" and 32x1. The Female Threaded Adator with Metal Insert is as per BSP/IS 2643/IS: 554. We provide fittings along with nickel plated brass insert.

• Material: Steel
• Finishing: Coated
• Length: 24 mm

• Material: Brass
• Brand Name: Horizon Metal And Alloys
• Country of Origin: Made in India
• Is It Rust Proof: Rust Proof
• Quantity Per Pack: 20
• Usage/Application: Construction

• Type: Brass Inserts
• Material: Brass
• Shape: Round
• Application: Electrical Fittings, Furniture, Machinery
• Color: Golden
• Finishing: Non Polished, Polished
• Feature: Fine Coated, Good Quality, Highly Durable, Strong Fitting, Sturdy Construction, Quality Tasted, High strength

• Material: Metal
• Type: Threaded
• Feature: Rust Proof
• Condition: New
• Quality: Best
• Finish: Zinc Plated

• Brand Name: Ride Play
• Material: FRP
• Item Code: SR-01
• Usage/Application: Outdoor
• Load Capacity: 25 - 40 kg

Provides posititve means for protecting and strengthening all tapes threads. Free running type Screw loccking type Inserts are manufactured out of stainless steel grade AISI-304, 316, AMS 7245 & Space age materials. Identification / surface coatings are done on customers' requirement. Inserts and accessories are interchaneable to othe available lead brands.   The state of the art manufacturing facilities ensure that each of the 2 million inserts produced every month meet stringent qualty norms, Bouyant with positive customer feedback plans are in place to leverage the monthly production capacity to 3.5 million inserts shortly Free running & Screw locking type UNC : 2-56 to 1" UNF : 3-56 to 1" Metric & sparkplug ISO: M1.6 to M45 BSW : 1/8 to 1" BSP : 1/8 to 1" Gripcoil wire thread inserts are available in five different lengths which are multiple of the diameters of particular insert. These are X the diamere 1D, 1.5D, 2D, 2.5D and 3D   Installation tools & accessories The Gripcoil Wire Thread Insert System includes a complete range of STI Hand & Machine Taps Installation / Insertion tools Tang break off tools Extraction / removals tools Thread plug gauge Thread repair kits     Benefits of GRIPCOIL SCREW THREAD Inserts  Better quality and performance while reducing overall product cost Create internal threads in which wear due to thread friction is virtually eleminated Useful in applications where repeated assembly & disassembly is required Protect tapped threads against failures due to stripping, seizing, corrosion and wear Create internal threads with greatly improved distribution of residual stress loading Compensate for pitch and flank angle errors Can generally be introduced into existing designs where no previous provisions has been made Make it possible to use thinner sections or lighter parent materials without sacrificing thread strength

• Standard: DIN, ASTM, BS and all International Standards
• Size: M3 - M56 , 3/6" to 2", Custom Sizes
• Tolerance: +/-0.01mm to +/-0.05mm
• Length: 3 mm to 200 mm, Custom Sizes
• Material Grade: Stainless Steel 310 ,316,317,347
• Packing: canton, pallet, Small Boxs or customer request

• Type: Threaded, Partially Threaded(ends only), Fully Threaded and/or Custom Threaded.
• Material: 17-4 PH, Alloy 30, AL-6XN, A286, Alloy 220, Inconel, Hastelloy, Monel, MP35N, Duplex Steel, Etc.
• Diameter: 2-6 Inch
• Length: upto 12 Inch
• Charecteristics: Charecteristics

Divya Darshan Metallica offers a high quality Stubs that are available in various specifications. Stubslength is measured fromend to end.

HeliCoil Inserts or Wire Thread Inserts are made of cold rolled 18-8 grade Stainless Steel to AS7245 , MIL-I-8846 & DTD734 specifications. This wire is cold rolled to a diamond cross section producing an ultimate tensile strength of approximately 1375-1725 MPa, mirror like surface finish of 2-4 Microns and flank hardness of RC 43-50 which is far in excess of the usual tapped materials and best suited for most of the industrial needs. HeliCoil Inserts can also be supplied in other materials such as SS-316, Inconel X-750, Titanium Alloys, Nimonic 90, Nitronic 60, Phosphorus Bronze, Beryllium Copper and with special coating and plating requirements such as Cadmium plating, Silver plating, Zinc plating, Nickel plating and dry film lubricants, Anti- Corrosion Salt spray resistant coatings.

We manufacture brass ppr male inserts as per custom specifications available in brass nickle & chrome finish.

• Application: Mould
• Shape: Round
• Application: Dies, Mould, Automobile
• Packaging Type: Box
• Size: 3mm
• Features: Sturdy construction, High tolerance, Resistance to abrasion

Brass Molding Inserts threaded Brass molding inserts for injection and roto molding . Moulding inserts & molding turned parts are also available as per customer requirements and samples plastic moulding PVC injection.

• Features: Maximum resistance to pulling , High-quality raw material , Customized specifications available .

Brass inserts Brass Molding Inserts Brass Plastic Molding Inserts Brass Plastic Molding inserts Brass Injection Molding Inserts Brass Injection Molding Inserts Brass proto molding Proto Molding inserts Brass inserts for cold Molding BRASS INSERTS BRASS MOULDING INSERTS BRASS MOLDING INSERTS PLASTIC MOLDING INSERT MOLDING PLASTIC MOULDING INSERTS THERMOPLASTIC MOULDING INSERTS INJECTION MOULDING INSERTS THERMOPLASTIC MOLDING INSERTS INJECTION MOLDING INSERTS COLD MOLDING INSERTS COLD MOULDING INSERTS INSERTS FOR MOLDED PLASTIC MOULDED PLASTIC INSERTS Hot insert molding Special Features : Threads as per International Go & Not Go Standards. Brass Stainless Steel Nuts Molding inserts molding nuts Deep Groove for maximum Pull Out Resistance. Inner Diameter (I/D) after Threads with very close tolerance to prevent unnecessary flush to enter into the inserts. Knurling Available : Diamond Straight Unidirectional

Typical Application :  Instrumentation , Telecommunications, and other Plastic Cases Assembly. Special Features : Threads as per International Go & Not Go Standards. Deep Goove for maximum Pull Out Resistance. Inner Diameter (I/D) after Threads with very close tolerance to prevent unnecessary flush to enter into the inserts. Knurling Available :  Diamond , Straight , Unidirectional , Both blind and through inserts are available with no minimum Qty. Material : Free Cutting Brass IS 319 Type (I) or Free Cutting Brass as per BS 249 Type (I) or High Grade Free Cutting Brass. Any Special Brass Material Composition as per customers requirement Threads : ISO Metric (MM Threads) , BA Threads , BSW Threads (Inches) , UNC, UNF Threads , Any threads as per custom design. Length / Size : Begins from M2 or equivalent threads and upto any size as per custom design or requirement Finish And Coating :  Natural, Nickle Plated, Tin Plated or any coating as per customer specification.           Brass inserts Brass Molding Inserts Brass Plastic Molding Inserts Brass Plastic Molding inserts Brass Injection Molding Inserts Brass Injection Molding Inserts Brass proto molding Proto Molding inserts Brass inserts for cold Molding BRASS INSERTS BRASS MOULDING INSERTS BRASS MOLDING INSERTS PLASTIC MOLDING INSERT MOLDING PLASTIC MOULDING INSERTS THERMOPLASTIC MOULDING INSERTS INJECTION MOULDING INSERTS THERMOPLASTIC MOLDING INSERTS INJECTION MOLDING INSERTS COLD MOLDING INSERTS COLD MOULDING INSERTS INSERTS FOR MOLDED PLASTIC MOULDED PLASTIC INSERTS Hot insert molding 

• Material: Brass
• Size: 1/2 Inch
• Packaging Type: PP Bag
• Country of Origin: Made in India
• Brand Name: Pragna
• Application: Pipe Fitting
• Connection Type: Female
• Head Shape: Flat

• Brass Insert: Brass Inserts

We manufacture and export brass inserts. Our range of cable glands and brass items also includes brass insert. These are made of brass. we offer our customers with exceptionally high range of brass inserts used in plastic moulding, bakelite moulding and press fitting. Also, all types of threads specified can be produced in blind & through holes. Mostly, the inserts are made from round and hex bars but if require we can avail you inserts from special profiles too. we manufactures : brass helical knurled inserts, brass press lock type inserts, brass straight knurled inserts,brass knurled screws, brass tappex type inserts, brass cross knurled inserts,brass self tapping inserts, brass molding inserts, brass bsp / npt threaded insert,brass m/f inserts for ppr fittings, brass m/f inserts for cpvc fittings, water tank fittings connectors etc.

We are offering brass inserts.

Description - Brass Inserts We are listed amongst the leading manufacturers, suppliers and exporters of finest quality Industrial Brass Inserts. Offered range of industrial brass inserts is manufactured by our engineers in complete adherence with the international quality standards The offered gamut of brass inserts is designed & developed by our professionals in adherence with the industry set norms. Offered range of brass inserts is available in multiple buff, nickel, chrome and washing platings. Available Inserts : Brass Knurling Inserts, Brass Threaded Inserts, Brass CPVC Inserts, Brass Diamond Inserts, Brass Straight Inserts,