Thyristor Module Dealers in Mumbai

• Thyristor Type: Silicon Controlled Switch (SCS)
• Surge Current Rating: 25 - 1200 Amp
• Reaction Time: 5 Millisecond only
• Voltage Range: 440V & 690V
• Temperature Range: -40 to 100 Degree C
• Mounting Torque: 4 Nm
•  :  

• Frequency: 50 Hz
• Maximum Operating Temperature: 140 Deg C
• Mounting Type: Screw Mount
• Current Rating: 312 A
• VRRM: 2400V
• Temperature Range: -40 to 100 Degree C

We are offering ace thyristor pfc modules. Features : thyristor pfc module is thyristor based switching module, which can be used in apfc panels in place of contactors, as contactors will draw a large amount of inrush current to capacitors. Zero current crossing of thyristor helps to minimize the inrush current. Should be used along with the detuned reactors for optimum results.

• Part Number: SKKT92/16E
• Maximum Operating Temperature: 85 Degree C
• Brand: Semikron
• Mounting Type: Screw Mount
• Surge Current Rating: 1600 A
• Rated Average On-State Current: 92 A
• Repetitive Peak Forward Blocking Voltage: 1600 V

Thyristor Switching Module With the thyristor module, we provide the main component - "The Electronic Switch"- for dynamic power factor correction. The LT-TSM series offers fast electronically controlled, self-observing thyristor switches for capacitive loads up to 50 kVAr, that are capable to switch PFC capacitors within a few milliseconds nearly without a limitation to the number of switchings during the capacitor lifetime. These switching modules are easy to install, have a fast reaction time of 5 msec and come with built-in indications of operations, faults and activation. These thyristor modules are very compact and operate at lower power losses. Capacitor Switching Solutions   Features :- Faster response time (5 ms) High peak inverse voltage (2.2 kV) ensures long operational life Automatic thermal cut-off Monitoring of voltage, phase sequence, faults; display of status via LED No system perturbation caused by switching operations (no transients) No auxiliary supply needed Maintenance free No noise during switching Compact design ready for connection and easy installation Capacitor duty contactor- MO C L&T’s range of capacitor duty Contactors is specially designed for capacitor switching applications. As capacitor switching is associated with high inrush current, the contactors are provided with damping resistors which limit the value of inrush current to a safe value. The contactors are used in APFC panels for switching power capacitors. Selection of these capacitors depends on the amount of reactive power compensation required. Features :- Separately terminated de-latching contacts for enhanced operational reliability Improved switching performance Dual contact gap for auxiliary contacts Separate termination of damping resistors Encapsulated resistor assembly Wide and chatter-free operating band Higher electrical life Enhanced product safety

• Rated Voltage: 400, 415, 440 and 690V

Thyristor Switch Module is rapid as in case of cranes, lifts, spot welding, plastic extrusion etc. As there are no moving parts the switching life is very high as compared to contactors. The power electronic devices used have a rated PIV of 2200, one of the highest in its class, thus enhancing the reliability of the module. Easy Installation : It can be used identiaclly as a Contactor.

• Frequency: 50 Hz
• Maximum Operating Temperature: 140 Deg C
• Mounting Type: Screw Mount
• Current Rating: 312 A
• VRRM: 2400V
• Temperature Range: -40 to 100 Degree C

• Application: Electrical Use
• Weight: 0-50gm, 100-150g
• Color: Blue, Light White, Silver
• Voltage: 110V, 220V, 380V
• Condition: New
• Frequency: 50Hz, 60Hz, 90Hz
• Driven Type: Electric
• Feature: Auto Controller, Durable

• Type: Thyristor Module
• Application: Electrical Use, Electronic Use, Machinery Use
• Weight: 0-50gm, 100-150g, 150-200gm, 200-250gm, 250-300gm, 300-350gm, 350-400gm, 400-450gm, 450-500gm, 50-100gm
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Voltage: 110V, 220V, 380V, 440V, 525V
• Condition: New, Old
• Power Type: AC, DC
• Operating Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Frequency: 50Hz, 60Hz, 90Hz
• Driven Type: Battery, Electric
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance

The converter grade thyristor range extends upto 4350Amps with PIV upto 2800V incorporating standard packages of 14" unf stud in to hat range to 3"in capsule type. The inverter range is divided into two distinct types. One meant for standard low frequency inverter upto 4350 amps and 2800 volts and the other for high frequency applications such as induction heating and high frequency welding. The high frequency range has thyristors upto 1200 amps with voltages upto 2000 volts., 'turn off' times as low as 10 microsecs.

• Capacitor: 5 to 100KVAR
• Dc Signal: 12/24 VDC
• Weight: 5.5 KG
• Thyristor Type: Switch
• Minimum Order Quantity: 1 Unit

Thyristor Switching Module With the thyristor module, we provide the main component - "The Electronic Switch"- for dynamic power factor correction. The LT-TSM series offers fast electronically controlled, self-observing thyristor switches for capacitive loads up to 50 kVAr, that are capable to switch PFC capacitors within a few milliseconds nearly without a limitation to the number of switchings during the capacitor lifetime. These switching modules are easy to install, have a fast reaction time of 5 msec and come with built-in indications of operations, faults and activation. These thyristor modules are very compact and operate at lower power losses.   Features :- Faster response time (5 ms) High peak inverse voltage (2.2 kV) ensures long operational life Automatic thermal cut-off Monitoring of voltage, phase sequence, faults; display of status via LED No system perturbation caused by switching operations (no transients) No auxiliary supply needed Maintenance free No noise during switching Compact design ready for connection and easy installation Capacitor duty contactor- MO C L&T’s range of capacitor duty Contactors is specially designed for capacitor switching applications. As capacitor switching is associated with high inrush current, the contactors are provided with damping resistors which limit the value of inrush current to a safe value. The contactors are used in APFC panels for switching power capacitors. Selection of these capacitors depends on the amount of reactive power compensation required. Features :- Separately terminated de-latching contacts for enhanced operational reliability Improved switching performance Dual contact gap for auxiliary contacts Separate termination of damping resistors Encapsulated resistor assembly Wide and chatter-free operating band Higher electrical life Enhanced product safety

semikron md7lc9716 thyristor module

Semiconductors Diode Thyrsitors Power Stacks Power Modules

We introduce ourselves as one of the leading Manufacturers and Suppliers of the premium Thyristor Switching Module in India. The Thyristor Switching Module, offered by us, is especially designed with utmost care to ensure that the customer gets value for his money. Our Thyristor Switching Module can be availed at the most competitive prices. Availability The company offers Thyristor Switching Module for Capacitor switching in APFC panels with ratings such as 5, 10, 15, 20, 25, 50, 75, and 100 KVAR. The higher rated Thyristor Switching Module can also be offered on request. Description The first surge current pulse of the Thyristor Switching Module is absent and the current drawn is equal to or less than the peak of the nominal current value. In the current plot above the surge current is absent. This is the case any time the thyristor is switched ON. The Thyristor Switching Module switches ON the capacitor bank irrespective of the value of charge remaining in the capacitor. The maximum time delay for switching is 20 milliseconds. Because of the superior switching system, the following are not required in the APFC panel : di/dt ChokesFast discharge resistors/reactorsSwitching in , re switching time delays They can be used for fast switching requirements including welding applications. 25 KVAR, 50 KVAR, 75 KVAR & 100 KVAR modules are fitted with fans. 5 KVAR, 10 KVAR, 15 KVAR, 20 KVAR modules do not require local fans but the APFC panel in which they are mounted must have blower for throwing hot air out. Each thyristor switching module shows following indications : Mains OnPFC Signal onThyristor R OffThyristor B OffFan FailOver TemperatureIf Fuses are Fitted R,Y,B Fuse Fail Indication.

Thyristor Module, Mcb, Overload Relays, Semiconductor

SCR and Thyristor Module, circuits, Electronic Components, electronic valve

Thyristor Modules, Ferrite Cores, water cooled thyristor switches

APFC Thyristor Switch Module, Oven Temperature Indicator, signal calibrator

Thyristor Switching Module, Distribution Boards, bus bar trunking system