Tin Can Making Machine Dealers in Mumbai

• Features: Tail Cutting arrangement after dozing, Easy change over from one size to another, Fill quantity can be accurately adjusted, Fill accuracy up to ±0.5%, Simple in operation and maintenance

C TYPE POWER PRESS

Mac Lifton Desilting cum dumper is a two in one machine a new concept in open drainage cleaning. The two in one machine is designed to clean open drains with the help of its excavator like arm. The silt is then loaded on to the container provided on the vehicle and then dumper at the dumping site.These machines are suitable for lifting and removing accumulated deposits of silt, debris, grit, pebbles. stones rubbles, grass, animal dung, twinge, vegetables, small branches of tree etc. for establishing the free flow in the drains. 

• Brand Name: Unity Metals
• Power Consumption: 5.0 HP
• Capacity: 1/4 ltr-5 ltr
• Output: 30/40 per minute
• Net weight: 300 Kgs
• Shipment case dimensions: 48 x 36 x 48 cm

• Condition: New
• Type: Automaticq
• Power: Electric
• MOQ: As per client requirement

We are a noteworthy name and work hard to attain complete client satisfaction. And, for achieving this objective, we facilitate them with easy payment modes. Only high quality raw materials have been used for the production of our products as we comply with all quality standards.

• Working Width: 48” Also available 48" (1200 mm) to 80" (2000mm)
• Floor Space 48” (1200 mm): 10 ft. x 8 ft
• Working Speed: 20 Mts. Per/Min. (depending on different Length)
• Unwind dia: 40" (1000 mm)
• Type of material: HDPE
• Core ID at Unwinding: 3” (76 mm)
• Min - Max Center Hole: 15" (380 mm) - 22" (500 mm) or as per requirement
• Power required: 30 HP
• Optional: Auto tension at Unwind, Web Guiding

Mechelonic Engineers has now introduced the second generation, fully automatic container side seam welding machine with medium speed production. Machelonic engineers system of container welding is well established for producing continuous, constant narrow weld at optimum working speed, using copper wire as intermediate electrodes. ApplicationsThe machine is designed for medium speed automatic welding of tin sheets in container manufacturing. This machine has flexibility of design to accommodate different sizes of cans from 72 to 450mm length(body height)  FeaturesThe machine is fully automatic combining various stages of manufacturing like destacker feeder, flexer, roll forming, overlapping the edges for welding of side seam, transport to welding station, wire drive, welding station, ejection of welding shells and wire collector. ConstructionCompact main frame of welded construction having streamlined appearance. The main transformer, variable speed drives, electronic control system etc. are enclosed in the frame and are easily accessible for serving. Main transformerSpecially designed class ‘F’ insulated transformer, water cooled and fully tropicalised for withstanding continuous operation. Destacker FeederPneumatically operated oscillating arm with a set of vacuum suckers, provided on the machine destacks the blanks and delivers them to flexer rollers. This process is monitored by electronic control system to give command for further operation. A hydraulically operated table is provided for stacking body blanks. This table automatically raises to adjust the level of body blanks for feeding to the flexer. The machine is provided with manetic sheet floaters and air jet separators to facilitate single sheet feed to flexer rollers.  FlexerThe body blanks fed to flexing rollers are flexed and moved to roll former. Flexure is provided with rubber coated rollers to avoid damage to printed surface of tin sheet. Roll FormerThe flex banks are automatically moved into the roll former and rolled into desired shapes. Roll former has arrangement to adjust the body rolling diameter within specified range. Centering FlapsThe rolls blacks are collected by a set of pneumatically operated flaps, which also guides edges of rolled body in catch bar. A separate set of flaps are required for each range of body diameter. Crown AssemblyThe crown assembly near welding station controls exact diameter of body before welding. This assembly can be calibrated outside the machine on a setting mandrel. Calibrating Ringfor welding with narrow overlap (0.5mm), calibrating ring assembly provided on the machine will maintain parallel overlap.One set consisting of crown assembly, crown setting mandrel, centering flaps and calibrating ring will be provided with machine for a specific size of can as standard. Other sizes will be available on additional cost. Upper ArmThe upper arm is manufactured from special grade high tensile brass of suitable cross section to minimize any deflection during normal operation. The upper weld wheel and Z- bar are fixed to this arm. Arm is water cooled.Note: tooling for 301 and 302 at extra cost: Tooling for 301 and 307 together with a small arm could be supplied as aspecial case provided the customer uses Tin plates of Temper T3. Catch- Bar and Z-BarThe machine is provided with catch-bar and Z-bar to control overlap and also to guide the shell, while welding. Welding StationWelding station consists of two anti-fiction type weld wheels, made of special copper alloy with mercury contacts. These weld wheels are water cooled. A specially made weld wheel holder for lower weld wheel is provided. Welding pressure is provided by lower weld wheel. A single copper wire running over weld weld wheels act as intermediate electrode. The formed body of can is transported to welding station. The arrival of can is sensed through an electronic system and welding initiates and completes automatically. In this machine welding is at the bottom of can. Wire Flattening UnitA controlled drive with rollers, flatten the copper wire to the required flatness before entering the wire feeding system. Wire Feeding SystemAn accurate variable speed drive with electromagnetic clutch brake system and control wire tensioning devices provide positive and precise fed control of copper wire. Ejection of Welded ShellsWelding shells are received on a magnetic conveyor and ejected on the main conveyor. Wire controlling SystemThe copper wire used as the intermediate electrode for welding is wound on a re-coiler. Control PanelA centralizedcontrol panel is provided with facilities like operating switches, pilot lamps, ammeter, current fine setting, batch counter and continuous counter of cans. Machine is also provided with additional facilities like single cycle mode and setting up mode. Operating cycleLoad body blanks on the table, adjust parameters on the machine, operate the start switch. The machine instantaneously starts and continues to weld the body blanks. The operator has to only ensure that the destacker table has enough stock of body blanks. The automatic function includes picking up of the body blanks, flexing roll forming, guide to the catch- bar and then to Z-bar and welding at the welding station. The welded bodies are automatically ejected out. Safety FeaturesSafety features like No Wire Detector, Wire Cut-off Detector, No Can Detector, No Guard Detector Weld Wheel Position Detector are part of the machine. Side Stripping System The Machine can be provided with Nordson internal and external liquid lacker stripping system, alongwith take of conveyor and suitable cutting system at additional cost.

• Range: Single head 5 to 100gm 30 tube double head 5 to 50gm Tube.
• Single: S.S. Syringe range 5 to 25, 25 to 50, 50 to 100
• Double: S.S. Syringe range 5 to 25, 25 to 50
• Required: As jacketed hopper and S.S. stirrer. all contact parts are of teflon & SS 304/316 qualities required.

Hydraulically operated container shape forming machine, for shaping Square and Rectangular bodies after electrically welded cylindrical Tin-Plate Bodies with 5 KW, 2-850 RPM complete with starter and other accessories, oil tank of adequate capacity mounted on a suitable frame work for keeping in the production line with one set of dies suitable for Square or irregular containers.  

• Packaging Details: 20/40 HQ container for shipping
• Port: Guangzhou
• Supply Ability: 50 Set/Sets per Month

We are offering microcomputer control packaging container pressure testing machine. microcomputer control packaging container pressure testing machine ■specification：10kn、20kn、50kn ■model：auto-104、auto-204、auto-504 ■application：this machine is mainly suitable for the packaging container of anti- pressure test and the stacking test , with a long time paul upload function，also it can carry out opposite angle and edge compression tests.

We are offering container filling machine. Empty containers are fed manually or automatically through turn table. The empty containers are carried by the belt conveyor up to the filling station.

Inspection of Rigid Plastic Containers The METTLER TOLEDO V27 series of inspection systems are designed to ensure the proper formation of rigid plastic containers.

plastic containers packaging

Container Filling Machine, Automatic Filling Machine

Tin Container Manufacturing Machine, Conjugate Cams

PET Container Making Machine, Pet Bottle Molding Machine

tin container machine, die makers

Water Container Machine, Toys Blow Moulding Machine

C Type Power Press, Stud Type Welding Machine

tin container machine, die makers, supplier of tin container machine

cnc shearing machines, MP High Speed Forging Press