Torsion Springs Dealers in Mumbai

Our prime concern is to fulfill variegated requirements of the clients, all the time. And, to achieve this objective, we have installed a capacious warehouse. We give our patrons the choice to make payments online or offline. Our company understands the concerns of its customers. Therefore, we make sure our payment options are safe.   Features : Dimensionally Accurate High Strength Corrosion Resistant

• Country of Origin: India
• Material: SS
• Shape: Spiral
• Style: Coil
• Usage: Industrial
• Color: Grey
• Finishing: Powder Coating
• Type: Industrial Springs
• Corrosion Resistance: Yes

We have adopted secure payment methods that are approved by authority and featured with options that facilitate quick transfers. We keep close eye on the quality of the products so as to deliver the best in class range.

We are associated with a team of deft professionals who make sure that the offered lot is prepared using the finest grade material only. For this, we have tied-up with the prominent vendors in the market. Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums.

• Length: 6 - 30 Inch
• Packaging Type: Box
• Wire Diameter: 20-40mm
• Specialities: High Strength, Finely Finished, Easy To Fit
• Material: Steel
• Shape: Spiral
• Finishing: Polished

Physical parameters: d (wire diameter): This parameter describes the diameter of wire used as Torsion springs, whose ends are rotated in angular deflection, offer resistance to externally applied torque. The wire itself is subjected to bending stresses rather than torsional stresses, as might be expected from the name.

Our Torsion Springs are able to endure both the lateral and angular forces. Torsion Springs work by increasing the diameter and the body length under changing conditions, especially temperature and pressure. While manufacturing these springs, We use A-grade raw material like EN-47, EN-45, high carbon spring steel material from grade I-IV, SS-302, SS-304, SS-316, and phosphorous bronze material. Therefore, these double torsion springs are in compliance with all the standards and norms of industry.

• MATRIAL: STAINLESS STEEL A-70 , A-2, A-4, B8,B8M,304, 316,

    DIN 128 - Flat Spring Washers Specifications  

We use superior-grade packaging as barrier protection for our products against dust, moisture, mechanical damages and logistical jostling. Our products packaging is premium. Since inception, our company has upheld its policy to make timely delivery. Thus, we guarantee to deliver products to buyers doorsteps on the dates promised.

• Type: Double Torsion
• Material: Metal
• Certification: ISI Certified
• Color: Black, Grey
• Usage: Industrial
• Surface Finishing: Polished
• Feature: Corrosion Resistance, High Quality, High Tensile
• Weight: 10-30 gm

The company makes available a well-designed range of Double Torsion Spring. The range of Double Torsion Spring made available by us is manufactured using high quality materials and is hence low on maintenance requirements. We offer Double Torsion Spring that has ends, rotated in angular deflection. Double Torsion Spring has a space between the coils to minimize friction. Double Torsion Spring consists of one right-hand wound and one left-hand wound coil section connected together, and working in parallel.

• Thickness: 0-3mm
• Specialities: Finely Finished, Easy To Fit
• Material: Metal
• Color: Metallic
• Finishing: Polished
• Corrosion Resistance: Yes

Torsion Springs are Helical Springs used to apply a Torque or store Rotational Energy. The common example of Torsion Spring is that used in a Clothes Pin. Torsion Springs are most commonly mounted on a Shaft / Mandrel, as they must be supported at Three or more points. The End configurations (legs) of Torsion Springs are numerous and are entirely dependent on the needed application. Legs can be Straight, Angled, Hooked or many other shapes as required to secure the ends during rotation. Torsion Springs can be designed to operate in either Clockwise or Anticlockwise direction but whenever possible they should be designed so that the Body Diameter decreases when a load is applied to the spring. The Double-Bodied Torsion Spring is a Single Spring but consists of Two Sets of coils, one set coiled Right Hand and one set coiled Left Hand. The Two Sets of coils will be connected each other, usually with an unwound section between the coils and work in parallel. The body coils of a Torsion Spring are usually close wound but can incorporate a pitch (spacing between the coils) if needed to reduce frictional losses. Applications: Torsion Springs are used in Clothes Pins, Clipboards, Garage Doors, Hinges, etc.

We manufacture compression springs from Wire dia 0.1 mm to 12.5 mm. The mode of operation of torsion springs is different from compression springs and extension springs. At accurate springs, wide ranges of torsion springs are manufactured on CNC Machines. A torsion spring is, in effect, a wound up cantilever. Torsion springs supply or withstand torque. To supply this torque, torsion springs require some from of spring leg. The type of spring leg is dictated by the application and can be as simple as a tangential straight leg or much more complex. It should be noted that it is best to keep the legs as simple as possible to reduce manufacturing tolerances and manufacturing difficulties.

We are offering wire forms made of flat & square wire. spiral spring » as per customer’s drawing and specifications.

• Type: Double Torsion
• Material: Metal
• Certification: ISI Certified
• Color: Grey
• Usage: Industrial
• Surface Finishing: Polished
• Feature: Corrosion Resistance, High Quality, High Tensile
• Weight: 10-30 gm

We are the main supplier of this product.

The company brings forth the finest quality torsion springs in the market. The double torsion springs manufactured by us are remarkable for long lasting functional life as we produce them from the best quality metal fabrics. They have high tensile strength and are extensively used in various industrial applications of automotive, stationery sectors. In addition to the above, when it comes to one of the most prominent metal torsion springs manufacturers in India, we reckoned to be the best company.

• Features: High tensile strength , Perfect design , Anti-corrosive.
• Materials: Stainless Steel
• Wire Diameter: 0.3 mm to 50.8 mm (2 inch)

Torsion Springs are widely used in various machines and the load applied to these springs is known as torque that helps to retain the rotational energy. We manufacture, export and supply a wide array of Torsion Springs made from superior grade materials. High efficiency, corrosion resistance, and optimum strength are the noted features owing to which our Torsion Springs are highly in demand.

• Type: Double Torsion
• Material: Metal
• Certification: ISI Certified
• Color: Black, Grey
• Usage: Industrial
• Surface Finishing: Polished
• Feature: Corrosion Resistance, High Quality, High Tensile
• Weight: 10-30 gm

We are the main supplier of this product.