Transducers Dealers in Andheri East, Mumbai

• Overall dimensions: 550Wx300Dx400H mm

The IP and PI converter setup is designed for understanding basic principles of electronic and pneumatic signal conversion. The setup consists of IP converter, PI converter, digital calibrator, pressure gauges and air regulator and air filter regulator. The Digital calibrator is used as current source to supply 4-20 mA DC to IP converter and to measure the output current in mA DC from PI converter. IP converter gives the output as 3-15 psig and PI converter gives output as 4-20 mA DC.

We Offer Power Factor Transducer. The STE-A-7T transducer converts the phase angle between current and voltage of a single phase or 3 phase balanced network into an output signal that can serve several receiving instruments such as indicators, recorders, alarm units etc. Feature •Available in accuracy class index - 0.5, & 1.0 •Withstands wide temperature variations. •VA burden on CT/PT very low. - < 0.5 VA •Wide range of Input / Output to meet National / International requirements. •Comply to revised IEC 60688 1997-10 standards. •Flexibility in auxiliary power supply requirements - A.C. / D.C. •Rugged and vibration resistant. •Withstands seismic test as per IEC 344-1974 for Nuclear Power applications. •Available in dust proof sheet plastic enclosures suitable for Back panel / Din rail mounting. •Multiple outputs also available - up to 4 •High input / Output isolation - 4.0 KV.

We are offering tap position transducer this transducer is used for measurement of the mechanical position of an external device or equipment. The mechanical position of the external device (transformer tap change gear) is converted to a resistance value with a potentiometer or a resistor network by a rotary switch arrangement. The output ( which is a load independent current or voltage) is proportional to the ratio of the resistance value at a position (tap) to the maximum resistance value in the network [i.e. Resistance value at the maximum position (tap)]. The output can be connected directly to indicating instruments, data transmission system, computer systems or scada systems.

Life-Care "Fast - Clean" Immersible Ultrasonic Transducers can be placed wherever you need them in your existing cleaning tanks. These units give you complete freedom to design specialized cleaning setups or to upgrade pre-soak tanks with ultrasonic.

The Studiomaster Professional E series components are designed for high quality sound reinforcement systems, especially for live applications.

The success of any Ultrasonic technique depends heavily upon the capability of a transducer to function in accordance with a particular application. RTUL is the leading manufacturer of reliable high performance transducers for all ultrasonic applications. RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications. Highlights of RTUL transducers: Design To cover all applications four distinct series are offered. Each series is characterized by its own unique set of optimum acoustic and electrical parameter. A novel dual damping concept is feature in each transducer type. Materials The selection and formulation of each transducer undergo strict laboratory criteria of testing and assembly. This has eliminated problems such as weak housing, weak bonding etc. RTUL transducers surpass all other commercially available units in wear and impact resistance and are not only long lasting but also are highly suitable inrugged applications. Fabrication For precise location of discontinuities special techniques have been developed that assure perfect alignment of geometric and acoustic centers. ULTRASONIC TRANSDUCER SERIES : Since a single transducer is not capable of performing a large number of applications, it is imperative that a number of ultrasonic transducers be designed in order to accomplish comprehensive material inspection. RTUL offers three distinct transducers series from 25 KHz to 50 MHZ. Each series is characteristically different from the other, thus suitable for a particular application. Some of the features of these series are given below. W -Series Probes W Series represents white frequency: The transducer of this series generate a white frequency signal, and represents high signal to noise ratio, high resolution and narrow initial pulse. W-Series transducers are recommended for thickness gauging and close surface material inspection. K -Series Probes K Series stands for characteristic transducers. Transducers of this series have high sensitivity, moderate signal to noise ratio and high penetration. They are tuned to a particular frequency and are suggested for deep material penetration, bulk body defects resolution, shear wave application and investigation of attenuative media. P -Series Probes P Series represents Panacea Transducers. P series transducers have response falling between W and K series. They have sensitivity closer to K series and Resolution closer to W Series making them ideal for all general purpose NDT application. N-SERIES Probes This new series has features like low initial ringing offering better near surface resolution, sharp echoes for higher overall resolution, high signal to noise ratio incoarse material and high reserve gain.

Broad family of products Direct drop-in replacements for older models Field proven reliable design Models for any circuit type, input, output and power

Nippen power line transducers give load independent and isolated dc outputs proportional to input parameters like current, voltage, frequency, power factor, active power, reactive power and dc isolation. a c voltage frequency pf active power reactive power d c isolation

• Linear volume flow rate actual value: 0 – 10 V DC or 2 – 10 V DC

Standard filtration in comfort air conditioning systems allows for use of the transmitter in the supply air without additional dust protection. Since a partial volume flow is passed through the differential pressure transducer in order to measure the volume flow rate, please note:With heavy dust levels in the room, suitable extract air filters must be provided.If the air is polluted with fluff or sticky particles, or if it contains aggressive media, dynamic pressure transducers cannot be used

We are known as the chief Ultrasonic Transducer Manufacturer and Supplier in India. Our Ultrasonic Transducer is available in different series that varies from 25 KHz to 50 MHZ. Moreover, the Ultrasonic Transducer can be acquired at affordable prices from us. Features Optimum acoustic Electrical parameterA novel dual damping concept Series Available W -Series : W Series represents white frequency: The transducer of this series generate a white frequency signal, and represents high signal to noise ratio, high resolution and narrow initialpulse. W-Series transducers are recommended for thickness gauging and close surface material inspection.K -Series : K Series stands for characteristic transducers. Transducers of this series have high sensitivity, moderate signal to noise ratio and high penetration. They are tuned to a particular frequency and are suggested for deep material penetration, bulk body defects resolution, shear waveapplication and investigation of attenuative media.P -Series : P Series represents Panacea Transducers. P series transducers have response falling between W and K series. They have sensitivity closer to K series and Resolution closer to W Series making them ideal for all general purpose NDT application.N-Series : This new series has features like low initialringing offering better near surface resolution, sharp echoesfor higher overall resolution, high signal to noise ratio incoarse material and high reserve gain.

We are involved in offering a wide range of 25 K.H.Z. Transducers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  25 K.H.Z. Transducers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame. Features: Sturdy design Highly durable Application specific design 

Ultrasonic Transducer, Ultrasonic Cleaner, Ultrasonic Cleaning Machines

Avatar innovatives pvt. Ltd we hold expertise in manufacturing and supplying of high quality transducers in india.

The success of any Ultrasonic technique depends heavily upon the capability of a transducer to function in accordance with a particular application. RTUL is the leading manufacturer of reliable high performance transducers for all ultrasonic applications. RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications.

RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications.

• Brand Name: ELAP
• Model Name/Number: PD 100
• Supply Voltage: 5 VDC or 10-24 VDC
• Stroke Length: 60 mm
• Stocking Temperature: -20 Deg C To 70 Deg C
• Max Speed: 60 m/min
• Protection Degree: IP6
• Progress Strength: 1 / 3 N

transducer, Digital Panel Meters, multi function meters

Pressure Transducer / Transmitters, Lube Oil Filtration Systems

LVDT transducers, Heavy Vehicle Products, Industrial Products