Transducers Dealers in Midc, Mumbai

Used for Converting power Line Parameters Into Proportionate Dc Signals, the Power Line Transducers are Ideal for Energy Management Data Acquisition System. the Power Line Transducers are also Suitable for Telemetering, Supervisory Control, Data Acquisition (scada) for Process Control in Varied Industries Including Power, Cement, Chemicals, Steel, Sugar, Building Automation, Fertilizers and Others. types (for Ac & Dc) power Factordc to Dc Converterscurrentvoltagefrequencypowerapparentactivereactivesummation Amplifierenergy apparentactivereactivetemperature (rtd/thermocouple) features also Available in 19" Rack Mounting / Eurocard Formatmultiple Output also Available – Up to 4available in Accuracy Class Index - 0.1,0.2,0.5,&1.0low Internal Consumptionwide Range of Input / Output to Meet National / International Requirementscomply to Revised Iec60688-1 Standardsflexibility in Auxiliary Power Supply Requirements - Ac / Dcwithstands Wide Temperature Variationsva Burden On Ct/pt Very Low - < 0.5 Varugged and Vibration Resistantwithstands Seismic Test as per Iec 344-1974 for Nuclear Power Plant Applicationsavailable in Dust Proof Sheet Plastic Enclosures Suitable for Back Panel / Din Rail Mountinghigh Input / Output Isolation - 4.0 Kv

We are offering active energy transducer this transducer is used for measurement of active energy for single phase (ste-a-14t) system as well as for 3-phase, 3-wire (ste-b-14t) system and 3-phase 4-wire (ste-c-14t) systems with balanced and unbalanced load. This is fully solid-state instrument, which can be interfaced directly with digital data acquisition system. The input currents are galvanically isolated and suitally scaled down by transformer t1, t2 etc. The voltage are scaled down by high impedance resistor networks. Depending on the system one or more electronic multipliers m1, m2 etc are used. The multiplying circuit used is the popular time division multiplication method. The implementation of the tdm technique as designed by situ makes the accuracy of multiplication dependent only on a few precision resistors and a low temperature coefficient reference zener. The outputs of the multipliers are summed up and fed to a precision voltage to frequency converter f. The frequency converter converts the input voltage to a proportional frequency by using "state-of-the-art" charge feedback technique. The output of the frequency converters in the form of pulses, which is then divided by using digital technique, the division factor depending on the input transformation ratios. The divided pulse rate is then output as a potential free contact.

We are involved in offering a wide range of 25 K.H.Z. Transducers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  25 K.H.Z. Transducers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame. Features: Sturdy design Highly durable Application specific design 

• Overall dimensions: 550Wx300Dx400H mm

The IP and PI converter setup is designed for understanding basic principles of electronic and pneumatic signal conversion. The setup consists of IP converter, PI converter, digital calibrator, pressure gauges and air regulator and air filter regulator. The Digital calibrator is used as current source to supply 4-20 mA DC to IP converter and to measure the output current in mA DC from PI converter. IP converter gives the output as 3-15 psig and PI converter gives output as 4-20 mA DC.

The PT460E Series transducer is a ±0.5% sensor ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mVV signal designed to work with most pressure indicators. The PT460E comes equipped with a six pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460E features a 12-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Hermetically sealed, available with diff freqs, different power levels, long life, modular, compact generator, ss 316l construction,.

The success of any Ultrasonic technique depends heavily upon the capability of a transducer to function in accordance with a particular application. RTUL is the leading manufacturer of reliable high performance transducers for all ultrasonic applications. RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications. Highlights of RTUL transducers: Design To cover all applications four distinct series are offered. Each series is characterized by its own unique set of optimum acoustic and electrical parameter. A novel dual damping concept is feature in each transducer type. Materials The selection and formulation of each transducer undergo strict laboratory criteria of testing and assembly. This has eliminated problems such as weak housing, weak bonding etc. RTUL transducers surpass all other commercially available units in wear and impact resistance and are not only long lasting but also are highly suitable inrugged applications. Fabrication For precise location of discontinuities special techniques have been developed that assure perfect alignment of geometric and acoustic centers. ULTRASONIC TRANSDUCER SERIES : Since a single transducer is not capable of performing a large number of applications, it is imperative that a number of ultrasonic transducers be designed in order to accomplish comprehensive material inspection. RTUL offers three distinct transducers series from 25 KHz to 50 MHZ. Each series is characteristically different from the other, thus suitable for a particular application. Some of the features of these series are given below. W -Series Probes W Series represents white frequency: The transducer of this series generate a white frequency signal, and represents high signal to noise ratio, high resolution and narrow initial pulse. W-Series transducers are recommended for thickness gauging and close surface material inspection. K -Series Probes K Series stands for characteristic transducers. Transducers of this series have high sensitivity, moderate signal to noise ratio and high penetration. They are tuned to a particular frequency and are suggested for deep material penetration, bulk body defects resolution, shear wave application and investigation of attenuative media. P -Series Probes P Series represents Panacea Transducers. P series transducers have response falling between W and K series. They have sensitivity closer to K series and Resolution closer to W Series making them ideal for all general purpose NDT application. N-SERIES Probes This new series has features like low initial ringing offering better near surface resolution, sharp echoes for higher overall resolution, high signal to noise ratio incoarse material and high reserve gain.

The Studiomaster Professional E series components are designed for high quality sound reinforcement systems, especially for live applications.

Sensors and Transducers, ups and inverters, Inverter Battery, Rectifier

We are known as the chief Ultrasonic Transducer Manufacturer and Supplier in India. Our Ultrasonic Transducer is available in different series that varies from 25 KHz to 50 MHZ. Moreover, the Ultrasonic Transducer can be acquired at affordable prices from us. Features Optimum acoustic Electrical parameterA novel dual damping concept Series Available W -Series : W Series represents white frequency: The transducer of this series generate a white frequency signal, and represents high signal to noise ratio, high resolution and narrow initialpulse. W-Series transducers are recommended for thickness gauging and close surface material inspection.K -Series : K Series stands for characteristic transducers. Transducers of this series have high sensitivity, moderate signal to noise ratio and high penetration. They are tuned to a particular frequency and are suggested for deep material penetration, bulk body defects resolution, shear waveapplication and investigation of attenuative media.P -Series : P Series represents Panacea Transducers. P series transducers have response falling between W and K series. They have sensitivity closer to K series and Resolution closer to W Series making them ideal for all general purpose NDT application.N-Series : This new series has features like low initialringing offering better near surface resolution, sharp echoesfor higher overall resolution, high signal to noise ratio incoarse material and high reserve gain.

Broad family of products Direct drop-in replacements for older models Field proven reliable design Models for any circuit type, input, output and power

Nippen power line transducers give load independent and isolated dc outputs proportional to input parameters like current, voltage, frequency, power factor, active power, reactive power and dc isolation. a c voltage frequency pf active power reactive power d c isolation

RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications.

• Linear volume flow rate actual value: 0 – 10 V DC or 2 – 10 V DC

Standard filtration in comfort air conditioning systems allows for use of the transmitter in the supply air without additional dust protection. Since a partial volume flow is passed through the differential pressure transducer in order to measure the volume flow rate, please note:With heavy dust levels in the room, suitable extract air filters must be provided.If the air is polluted with fluff or sticky particles, or if it contains aggressive media, dynamic pressure transducers cannot be used

Pressure Transducer / Transmitters, Lube Oil Filtration Systems

ultrasonic equipment, Ultrasonic Industrial Cleaning System

transducer, Digital Panel Meters, multi function meters

The success of any Ultrasonic technique depends heavily upon the capability of a transducer to function in accordance with a particular application. RTUL is the leading manufacturer of reliable high performance transducers for all ultrasonic applications. RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications.

power transducer, Temperature Controller, Thyristors, signal conditioner

Honeywell Pressure Transducers, petrochemical plants, biofuels

LVDT transducers, Heavy Vehicle Products, Industrial Products