Transducers Dealers in Sakinaka, Mumbai

• Brand Name: ELAP
• Model Name/Number: PD 100
• Supply Voltage: 5 VDC or 10-24 VDC
• Stroke Length: 60 mm
• Stocking Temperature: -20 Deg C To 70 Deg C
• Max Speed: 60 m/min
• Protection Degree: IP6
• Progress Strength: 1 / 3 N

We Offer Active Energy Transducer. This transducer is used for measurement of Active Energy for single phase (STE-A-8T) system as well as for 3-phase, 3-wire (STE-B-8T) system and 3-phase 4-wire (STE-C-8T) systems with balanced and unbalanced load. This is fully solid-state instrument, which can be interfaced directly with Digital Data Acquisition System. The Input Voltages and currents are galvanic-ally isolated and suitably scaled down by transformer T1, T2 etc. Depending on the system one or more electronic multipliers M1, M2 etc are used. The multiplying circuit used is the popular time division multiplication method. The implementation of the TDM technique as designed by SITU, makes the accuracy of multiplication dependent only on a few precision resistors and a low temperature coefficient reference zener.The outputs of the multipliers are summed up and fed to a precision voltage to frequency converter F. The frequency converter converts the input voltage to a proportional frequency by using “State-of-the-art” charge feedback technique. The output of the frequency converters in the form of pulses, which is then divided by using digital technique, the division factor depending on the input transformation ratios. The divided pulse rate is then output either as an open collector output or as a potential free contact. Feature : • Available in accuracy class index - 0.5, 1.0 & 2.0 • Withstands wide temperature variations. • VA burden on CT/PT very low. - < 0.5 VA • Low internal consumption • Wide range of Input / Output to meet National / International requirements. • Flexibility in auxiliary power supply requirements - A.C. / D.C. • Rugged and vibration resistant. • Withstands seismic test as per IEC 344-1974 for Nuclear Power applications. • Available in dust proof sheet plastic enclosures suitable for Back panel / Din rail mounting. • High input / Output isolation's - 4.0 KV.

We are involved in offering a wide range of 25 K.H.Z. Transducers to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  25 K.H.Z. Transducers. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame. Features: Sturdy design Highly durable Application specific design 

• Overall dimensions: 550Wx300Dx400H mm

The IP and PI converter setup is designed for understanding basic principles of electronic and pneumatic signal conversion. The setup consists of IP converter, PI converter, digital calibrator, pressure gauges and air regulator and air filter regulator. The Digital calibrator is used as current source to supply 4-20 mA DC to IP converter and to measure the output current in mA DC from PI converter. IP converter gives the output as 3-15 psig and PI converter gives output as 4-20 mA DC.

• Linear volume flow rate actual value: 0 – 10 V DC or 2 – 10 V DC

Standard filtration in comfort air conditioning systems allows for use of the transmitter in the supply air without additional dust protection. Since a partial volume flow is passed through the differential pressure transducer in order to measure the volume flow rate, please note:With heavy dust levels in the room, suitable extract air filters must be provided.If the air is polluted with fluff or sticky particles, or if it contains aggressive media, dynamic pressure transducers cannot be used

The Series 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10" w.c. up to 400" w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications.

We are offering power factor transducer the ste-a-7t transducer converts the phase angle between current and voltage of a single phase or 3 phase balanced network into an output signal that can serve several receiving instruments such as indicators, recorders, alarm units etc.

We are known as the chief Ultrasonic Transducer Manufacturer and Supplier in India. Our Ultrasonic Transducer is available in different series that varies from 25 KHz to 50 MHZ. Moreover, the Ultrasonic Transducer can be acquired at affordable prices from us. Features Optimum acoustic Electrical parameterA novel dual damping concept Series Available W -Series : W Series represents white frequency: The transducer of this series generate a white frequency signal, and represents high signal to noise ratio, high resolution and narrow initialpulse. W-Series transducers are recommended for thickness gauging and close surface material inspection.K -Series : K Series stands for characteristic transducers. Transducers of this series have high sensitivity, moderate signal to noise ratio and high penetration. They are tuned to a particular frequency and are suggested for deep material penetration, bulk body defects resolution, shear waveapplication and investigation of attenuative media.P -Series : P Series represents Panacea Transducers. P series transducers have response falling between W and K series. They have sensitivity closer to K series and Resolution closer to W Series making them ideal for all general purpose NDT application.N-Series : This new series has features like low initialringing offering better near surface resolution, sharp echoesfor higher overall resolution, high signal to noise ratio incoarse material and high reserve gain.

Life-Care “Fast –Clean" Immersible Ultrasonic Transducers can be placed wherever you need them in your existing cleaning tanks. These units give you complete freedom to design specialized cleaning set ups or to upgrade pre-soak tanks with ultrasonic.Each Immersible Transducer is fabricated from 304/ 316 stainless steels with welded seams and stainless steel fittings. These hermetically sealed modular components are available in standard sizes, other sizes can be custom built for special applications.Immersible Models Flexible, Distinct design and precision cleaning.Immersible Ultrasonic Transducers offers the ultimate in ultrasonic systems flexibility. These modular units can be incorporated into the designs of new systems or retrofitted into existing systems to add ultrasonic capability.Help in designing an Immersible Transducer installation for any application is also applicable.They are ideal for elements and products of various categories.

RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications.

Nippen power line transducers give load independent and isolated dc outputs proportional to input parameters like current, voltage, frequency, power factor, active power, reactive power and dc isolation. a c voltage frequency pf active power reactive power d c isolation

The success of any Ultrasonic technique depends heavily upon the capability of a transducer to function in accordance with a particular application. RTUL is the leading manufacturer of reliable high performance transducers for all ultrasonic applications. RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications. Highlights of RTUL transducers: Design To cover all applications four distinct series are offered. Each series is characterized by its own unique set of optimum acoustic and electrical parameter. A novel dual damping concept is feature in each transducer type. Materials The selection and formulation of each transducer undergo strict laboratory criteria of testing and assembly. This has eliminated problems such as weak housing, weak bonding etc. RTUL transducers surpass all other commercially available units in wear and impact resistance and are not only long lasting but also are highly suitable inrugged applications. Fabrication For precise location of discontinuities special techniques have been developed that assure perfect alignment of geometric and acoustic centers. ULTRASONIC TRANSDUCER SERIES : Since a single transducer is not capable of performing a large number of applications, it is imperative that a number of ultrasonic transducers be designed in order to accomplish comprehensive material inspection. RTUL offers three distinct transducers series from 25 KHz to 50 MHZ. Each series is characteristically different from the other, thus suitable for a particular application. Some of the features of these series are given below. W -Series Probes W Series represents white frequency: The transducer of this series generate a white frequency signal, and represents high signal to noise ratio, high resolution and narrow initial pulse. W-Series transducers are recommended for thickness gauging and close surface material inspection. K -Series Probes K Series stands for characteristic transducers. Transducers of this series have high sensitivity, moderate signal to noise ratio and high penetration. They are tuned to a particular frequency and are suggested for deep material penetration, bulk body defects resolution, shear wave application and investigation of attenuative media. P -Series Probes P Series represents Panacea Transducers. P series transducers have response falling between W and K series. They have sensitivity closer to K series and Resolution closer to W Series making them ideal for all general purpose NDT application. N-SERIES Probes This new series has features like low initial ringing offering better near surface resolution, sharp echoes for higher overall resolution, high signal to noise ratio incoarse material and high reserve gain.

Broad family of transducers available, covers any application Choose an accuracy range that meets your application and budget Direct drop-in replacements for older models Field proven design with over 1 million units in service

The Studiomaster Professional E series components are designed for high quality sound reinforcement systems, especially for live applications.

• Usage/Application: Ultrasound Transducer Probe
• Country of Origin: Made in India
• Type: Probe

Sensors and Transducers, Insulation Material, ups and inverters

The success of any Ultrasonic technique depends heavily upon the capability of a transducer to function in accordance with a particular application. RTUL is the leading manufacturer of reliable high performance transducers for all ultrasonic applications. RTUL offers one of the most comprehensive selections of ultrasonic transducers that encompass all non-destructive testing and process applications.

Ultrasonic Transducer, Ultrasonic Cleaner, Ultrasonic Cleaning Machines

transducer, Electrical Instruments, Digital Tap Position Indicator