Transformers Dealers in Andheri East, Mumbai

A current transformer (CT) is used for measurement of alternating electric current. Current transformers, together with voltage (or potential) transformers (VT or PT), are known as instrument transformers. When current in a circuit is too high to apply directly to measuring instruments, a current transformer produces a reduced current accurately proportional to the current in the circuit, which can be conveniently connected to measuring and recording instruments. A current transformer isolates the measuring instruments from what may be very high voltage in the monitored circuit. Current transformers are commonly used in metering and protective relays in the electrical power industry.

• Type: Furnace Transformer
• Color: metallic
• Condition: New
• Automatic Grade: Automatic
• Cooling System: Oil Cooling
• Application: industrial use

We are a prominent Manufacturer, Supplier and Exporter of Salt Bath Furnace Transformer from Mumbai, Maharashtra. Our Salt Bath Furnace Transformer finds various applications in different industries, mainly for the purpose of heating. The pre installed transformer can provide quite a high range and can maintain heavy resistance loads with ease. Because of this, our Salt Bath Furnace Transformer is widely demanded all over the world. Customers can avail of Salt Bath Furnace Transformer from us at reasonable rates.

• Brand Name: NMC
• AUX SUPPLY : 85V-265V AC/DC: 6 Digits for indication of Counter upto 999999 Counts
• Presettable, Resettable Counter: 4-20mA Single Output available
• 4-20mA second output optional: No. of Tap Position : Up to 39 Taps.
• Type of Sensor : 10 ohms to 1 K ohms, per step resistance (Any one).: Size : 96mm X 96mm X 85mm

We are offering digital tap position indicator with counter indication. Our digital tap position indicator with counter display is used to indicate the tap position of the power transformer with on load tap changer as well as also indicates the counts of the tap changer.

• Single phase: Input: 240V, 50/60Hz AC 1 ph. Output: 0-270V, 50/60Hz AC 1 ph.
• Three phase: Input: 415V, 50/60Hz AC 3 ph. Output: 0-470V, 50/60Hz AC 3 ph
• Excellent Regulation: The drop in voltage from “no load to full load” is minimal in Reguvolt Auto-transformers.
• High Efficiency: Careful design and proper selection of copper and core assures the user of low watt loss, as compared to other type of controllers.
• No Wave From Distortion: Reguvolt provides an output voltage wave-form, which is a faithful and distortion less replica of the input voltage wave form.
• Silver Plated Communator: A special silver plating technique is used on the commutator, enabling it to with stand high overloads & maintain constant contact drop. It is also ensures smooth operation, long life & increased resistance to corrosion.
• Smooth & Linear Output: As voltage between turns is small and as the brush-arm is in constant contact with more then one turn, harmful sparking is avoided and output voltage can be set very easily to fraction of a volt from zero onwards by rotation of the knob.
• Low Magnetizing Current: By using an adequate section of high quality grain oriented silicon steel, the iron losses in Reguvolt, are controlled to the minimum. The no-load current in all Reguvolt transformers, is invariably less than 3% of the rated current.

• Power: 10 Walt
• Warranty: 6 Months
• Frequency: 50hz
• Feature: Sturdy Construction
• Output: 0.33V
• Accuracy: 1.0%

We are the main supplier of this product.

We are recognized as one of the leading manufacturers and suppliers of an immaculate range of AC DC Adaptor Transformer. Our offered transformers are manufactured by our highly skilled professionals using high grade components and devices in adherence to the set industry norms. Further, these transformers are tested against various quality parameters to ensure quality and flawlessness. We offer our transformers in various specifications to cater to the varied needs of the clients at affordable prices. Test Conducted : During manufacturing all components as well as raw materials used undergo extensive testing at our labs, Special test like heat run is conducted on the prototype of every lot Some other tests outsourced to reputed agencies include: H V Test Short circuit test No load current and on load current and stablizer Features : Computerized designs Provides maximum efficiency Manufactured as per relevant industry standards Finished products undergo extensive testing to ensure in them optimum operational efficiency Come with high quality insulation Come with high quality insulation

We are offering current transformers. The basic application of current transformers are: lowering the very high primary current passing through bus bars, cables, or wires to 5a or 1a, a measurable quantity by measuring instruments. isolating the measuring instrument and protective devices from mains. reproducing proportionate primary current on its secondary side, as required for extending the range of the instruments.

• Type: Oil Cooler

The Leaded Choke Coils, which we offer, find use in diverse applications. These Leaded Choke Coils are sourced from reliable vendors in the domain. We make available the Leaded Choke Coils at reasonable prices to the clients. Additionally, the Leaded Choke Coils effectively filter the noise and stores the energy. Used In : Common Mode ChokeRF Choke-Axial typeRadial Type chokeFlat coil

Our lighting transformers range from 1 KVA to 100 kVA in capacity, and come in Air Dry type Double wound - both with and without enclosures Temperature class of insulation B and F can be offered All our transformers are tested for temperature rise and are low loss, making use of the best quality electrical steels and electrolytic grade copper wire

Range : Single Phase 15 VA - 30 KVA , Three Phase 1 KVA - 120 KVA Compact, Dimensionally flexible, Energy efficient Easy mounting, Low stray magnetic fields, Reduced transformer hum Options : Thermal Fuse / Switch , Magnetic Shield Custom built Current transformers , Inductors & Chokes In Technical Collaboration with Plitron Inc. Canada

Phantom load test set Simulates load conditions by providing adjustable voltage, current and power factor, for in house and site testing of 3 phase KWh Meters.

3ط Wye connected primary line with ground & neutral,Two sets of independent secondary lines to exhibit complexity of distribution network,Two sets of three 1f transformers to demonstrate 3f banking configurations, such as wye-wye, delta-delta, closed delta-wye, closed wye-delta, open-wye, open delta, etc.Fault introduction facility for troubleshooting,Each individual transformer winding is protected & designed to accept multiple faults

• Color: Black, Grey, Brown, White
• Material: Mild Steel, Ferrite, Silicon
• Shape: Round
• Finishing: Polished, Shiny
• Usage: Industrial, Transformer
• Packaging Type: Box, Cartage

• Outer Diameter: 160 mm+/-2mm
• Inner Diameter: 110 mm+/-1mm
• Height: 30 mm+0.2 /- 0.0 mm

Key: Practical saturation measured for H = 800 A/m. Remanent induction Br and coercive field Hc measured from H = 80 A/m. Practical saturation Bs and Remanent induction Br measured for H = 800 A/m. Measured for H = 4 mA/cm (peak value). Sinusoidal excitation field H = 4 mA/cm (peak value). Impedance permeability for B = 0.8 T. Measurements made on 35X26X0.34 mm ring specimens after annealing in Pure& Dry Hydrogen for 4h at 1170°C followed by cooling at 200°C/h. Practical saturation measured for H=5000A/m. Core loss W/kg at 1.5T at 50Hz=3.90 max. Typical operating frequency - 50 hz to 400hz

We manufacture several types of transformers such as SMPS, Impedance Matching, Pulse, Power etc. We use various types of cores such as RM, EE, Pot, Balun etc. These transformers are manufactured using high quality Ferrite Cores, which are normally procured from Magnetics, Ferroxcube, EPCOS and NEOSID, as per our customer requirements. We use various types of copper wires right from 130 ° C to 200 ° C temperature class. The wire gauges vary between 22 AWG / 0.60 mm dia and 49 AWG / 0.028 mm dia. These low loss-high efficiency transformers are used for various applications: Telecommunication Systems Computer Systems Medical Equipment Power Supplies Industrial Equipment Television Set Audio / Video Systems  

  A heat exchanger for cooling oil. Most automatic transmissions are equipped with an oil cooler that's located inside the radiator. Since the radiator usually runs close to 200 degrees, the amount of "cooling" this kind of setup provides is questionable. An aftermarket oil coolers that can be installed outside the radiator can provide much better cooling, and is recommended for towing or high performance applications. Except for air-cooled engines (older Volkswagens for example) and race cars, most engines do not use an oil cooler for the engine. The engine's cooling system is usually adequate to keep oil temperatures within safe limits. Radiators are used for cooling internal combustion engines, chiefly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plant or any similar use of such an engine. They operate by passing a liquid coolant through the engine block, where it is heated, then through the radiator itself where it loses this heat to the atmosphere. This coolant is usually water-based, but may also be oil. It's usual for the coolant flow to be pumped, also for a fan to blow air through the radiator.  

Salient Features:  Well designed stepless, smooth and provides good control over the current.  Smooth and steady arc which results good welding quality and performance.  Winding of the machine is well designed and heavy duty ensures longer service life.  Machine construction is robust .  Ideal for shop, site and construction purpose.  Easy arc striking with all type of electrodes.  Heavy duty air cooled for MMA welding with basic, rutile and high recovery electrodes.  Ideal for TIG welding with optional TIG attachments.  Heavy duty metallic body.  Low operating cost, longer lasting and trouble free.  Modular design, Easy in operation, User-friendly.

Natural air cooled � Continuously Rated � Protected from outdoor weather � Ef ficient performance � Excellent voltage regulation � Long functional life � OFF load tap changing facility � V accum Impregnated � Approved by RDSO Lucknow - Indian Railways

Two Stage Transformer Oil Filtration Plant, offered by us, is suitable for degassing, dehydration and filtration of transformer oil under vacuum and achieve oil test results as per I.S standards. It basically works on heating, filtration and vacuum treatment. Our Transformer Oil Filtration Plant has flow rates ranging from 300 LPH to 12000 LPH. We manufacture different models of Transformer Oil Filtration Plant as per the requirements specified by the buyers. We offer Transformer Oil Filtration Plant for on-site filtration, castor mounted for factory and site filtration and stationery for filtration of collected oil. Optional items such as ionic reaction column (for acidity correction), Spirafuge for coarse separation, transformer evacuation system can also be offered with the product.

• Core Type: SPCT
• Country of Origin: Made in India
• Rated Primary Rating: 30A to 4000A
• Rated Secondary Output: 5A
• Rated Burden: 1VA to 15VA
• Class of Accuracy: 0.5 to 5

The Rectangular CT's is provided in tape insulated construction in rectangular design. It is extremely helpful in accelerating output and accuracy with an increased ratios. The rectangular CT's is selected on the basis of its mechanical strength and durability. It is highly efficient, requires less maintenance and can withstand impulse voltage.

• Country of Origin: India
• Phase: Three Phase
• Power: 240V

• Application: Industrial
• Packaging Type: Barrel/Drum
• Brand: TRF
• Grade: Mineral
• Features: Smooth Flow,Anti rust corrosion
• Unit Pack Size: 210 Ltr.

We are the main supplier of this product.

variable voltage transformers, Ring current transformer

 Hermitically Sealed and Conservator type of construction- Stepdown Transformers- Stepup Transformers- Energy Effecient Tranformers- Transformers ment for Solar and Wind Applications- Transformers ment for Mines Applications

Magnetic Transformer, transformer connector