Transformers Dealers in Kalbadevi, Mumbai

• Core Type: Wound CT
• CT Ratio: 50/5
• Phase: Single Phase
• Material: Cast Iron
• Country of Origin: Made in India
• Power: 5 kVA

• Power: 2 HP
• Phase: Single Phase
• Application: Industrial
• Brand Name: Atlas
• Input Voltage: 220 V
• Current: 5 A
• Cooling Type: Dry Type/Air Cooled
• Frequency: 50-60 Hz

• Features: Precise dimension, High tensile strength, Well polished
• Length: 950/1750 mm
• Width: 15 mm
• Thickness: 1.5-3 mm

The CT in Merlin Gerin range are suitable for use in the entire low voltage field, 40 to 6000A. installation:on symmetrical DIN rail, on mounting plate, on busbar. The primary current can be measured in two ways. CT with connection of primary by screw and nut.

DESCRIPTION:- Direct measurement of current in high voltage system is not possible because of insulation problem of measuring instruments. It is also not possible to use current flowing through the system directly, for protection purpose due to its high value & high insulation problem. In such conditions Current Transformers are used. BASIC FUNCTIONS OF VOLTAGE TRANSFORMERS ARE . . . To reduce the line current to a value which is suitable for standard measuring instruments, relays etc. To isolate the Measuring Instruments, Meters, Relays etc. from high voltage side of an installation. To protect Measuring Instruments against short circuit currents. To sense abnormalities in current & give current signals to protective relays to isolate the defective system.

hyflo supercel, Liquid Monoethanolamine, amyl acetate, Barium phosphate

• Core Type: Ring Core Type CT
• CT Ratio: CBCT-35-1 / 70-1 / 120-1 / 210-1 /310-1
• Brand: Selec
• Usage/Application: Industrial
• Inner Diameter: 70mm
• Product Code: CBCT-70-1
• Operating Range: 30 mA - 30A
• Current Transformer Type: Core Balance Current Transformer

• Country of Origin: Made in India
• Phase: Single Phase
• Output Voltage: 12 V AC
• Power Source: Electric
• Shape: Rectangular
• Packaging Type: Box
• Wattage: 100 W
• Input Voltage: 240 V AC
• Frequency: 50 Hz
• Warranty: 1 Year

• Mounting Type: Panel mount
• Primary rate: 30A to 600A
• Accuracy Class: 1 to 5
• Secondary rate: 5A
• Rate Burden: 5VA
• Supply Voltage: 720V maximum
• case: B
• Applicabe standard : IEC / EN 60044-1

Current transformers are used for monitoring load current in networks or great loads. They transform currents in the kA range to e.g. 0-1 A or 0-5 A. Thus large load currents can be evaluated and monitored by downstream automation devices. The new “PACT” analog current transformer portfolio offers a complete range of tubular bar, plug-on and wire-wrap transformers for measuring large currents of 1 A to 4000 A. Depending on the application requirements, almost 3000 different versions of different accuracy classes, capacities and sizes are available. Different mounting positions allow for use even in applications where space is critical. Besides non-calibratable current X’mers, calibratable X’mers are offered, which become calibrated current X’mers after an additional calibrating process. On customer’ request, the calibration of the measuring transducers including the creation and handling over of all certificates can be processed by Phoenix Contact.         Control systems or display elements Like e.g. digital display require standard signals of e. g. 0…20mA as an input signal. As in the current application path to be measured, large currents of upto 4000 A can occur, you need current X’mers that convert these high current to 1 A AC or 5 A AC. Then downstream current transducers uses this current to create typical standards signals that can be processed by e.g. control system. Current Monitoring: With the help of monitoring relays (IF monitoring), currents can be monitored and over currents can be can be signaled via a switching output. As typical monitoring relays only have a measuring input of up to 10 A maximum, a current X’mers the high currents into smaller ones. Motor Management : The electronic motor managers (EMMs), among other things, serve for motoring a drive system or a 3 – phase load. For this, 3 currents have to be measured and monitored. Currents of more than 5 A cannot be processed by the EMM current measuring input. Therefore, separate current X’mers has to be installed before the current measuring input so that the primary current is transformed into 5 A maximum. Test Circuits : Test disconnect terminal blocks and slide terminal blocks were developed especially for the use in current X’mer secondary circuits. The terminals can be fitted on both sides with fixed and switchable jumpers as well as test sockets.

• Features: Sturdiness, Easy usage, Light weight
• Application: Drinking Water, Chemical Handling, Plumbing, Gas Handling
• Single Piece Length: 3 meter
• Size/Diameter: 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch

• Power: 3kV
• Material: Cast Iron
• Cooling Type: Dry Type
• Phase: Three Phase
• Primary Voltage: 220 V
• Frequency: 50Hz
• Usage: Used in Flying Insect Killer
• Color: Black
• Weight: 1.5 Kg

The basic application of current transformers are: Lowering the very high primary current passing through bus bars, cables, or wires to 5A or 1A, a measurable quantity by measuring instruments. Isolating the measuring instrument and protective devices from mains. Reproducing proportionate primary current on its secondary side, as required for extending the range of the instruments. Basically CTS are of different types: BAR PRIMARY CURRENT TRANSFORMER (BPCT) For Currents of 100A and above the bus bars or cables are quite thick and it is easier to measure the currents without breaking the bus bars or cable by means of a Bar Primary current transformer which can be slipped over the bus bar or cable. These CTs are most commonly used as they are sturdy, compact and more economical. WOUND PRIMARY CURRENT TRANSFORMER (WPCT) For currents below 100A, it is uneconomical to achieve the desired accuracy by employing Bar primary type CTs and the solution is Wound Primary C.T., where both primary and secondary are Wound over the core. CLAMP ON CT'S NIPPEN clamp-on CT's enable quick and accurate current measurements on live circuits without disconnecting loads. Precision phase shift characteristics ensure accurate power or energy measurements conveniently. These are one of the accessories in our energy audit system.

• Surface Finishing: Polished
• Cooling Type: Oil Cooled, Dry Type
• Usage: Industrial
• Packaging Type: Carton Box
• Speciality: Robust Construction, High Efficiency
• Class: 100kVA to 20MVA up to 132kV class

We are offering an extensive array of welding transformers, we are flexible enough to deliver the best in class range. Our company offers convenient payment choices. We are well versed with diverse payment methods. Whether online or offline, patrons can make payments as per their convenience.

• Brand Name: TRANVOLT

We offer transformer oil also know as insulating oil capacitor oil use in electric transformer from 22 kv to 200 kv transformers as cooler.

APAR pioneered the manufacture of internationally benchmarked grades of high performance Transformer Oils in India that were more environment friendly and of high performance with higher oxidation stability, lower gassing tendency and non corrosive with ultra low levels of sulphur.

dimmerstats, Electric Instruments, level controllers, pump controllers

• Range: 850-1000

Core laminations are the main part of an electrical transformer, and this attribute to 70% of a transformer cost. These core laminations are required to be cut from special steel called as Cold Rolled Grain Oriented Electrical Steel or popularly known as CRGO. The CRGO is a special quality of steel which have a special grain surface and comes in a thickness of 0.23 mm, 0.27 mm, 0.30 mm, 0.35 mm. (generally called M3, M4, M5 & M6). Lower the thickness of material better is the quality of material. The Quality of CRGO is measured in terms of lower losses of electrical current, which flow in the core. The proper design of core and good quality of core material do a best job in combination. Mainly the core losses are measured in Watts per Kg. Every type of steel has "grains" which consist of "domains". These "domains" are nothing but electrical charges oriented in any random direction. Therefore if a transformer were to be made of Mild Steel used as core material, the core loss would be approx. 16 to 17 wkg at 1.5T50Hz and the size of the transformer would be approx. 18 to 20 times the size of a transformer manufactured with GO steels.

• Type: Industrial Automation
• Diameter: 20-30mm
• Certification: ISO 9001:2008 Certified
• Application: Industrial Use

We are the molybdenum rod Manufacturer & Exporter of a wide range of products which include Molybdenum Products such as Moly Rod, Molybdenum Strip, Molybdenum Sheets, Molybdenum Rods and Molybdenum Wire.

Transformers find application in Power Generation, Transmission and Distribution. Power Transformer – upto 1000 MVA; 1200 kV class Generator Transformer  Step Up and Step Down Transformer Power Transformer Interconnecting Transformer (Auto Transformer) Trackside Transformer for Railways Distribution Transformer – 500 kVA & above Hermitically Sealed and Conservator type of construction Unit Auxiliary Transformer Station Auxiliary Transformer Energy Effecient Tranformers Transformers meant for Solar and Wind Applications Transformers meant for Mines Applications Rectifier Transformer – upto 160 KA DC Six pulse transformer with IPT Twelve pulse with IPT (Double Deck Construction) Bridge Connection For Railway Traction Furnace Transformer – upto 100 MVA Arc Furnace Transformer Submerged Arc Furnace Transformer Ladle Furnace Transformer Induction Furnace Transformer DC Arc Furnace Transformer Specialty Transformer Testing Transformer Transformers having multiple secondaries Reactors upto 765 kV Shunt Reactors  Series Reactors

• Color: Black
• Application: Oil & Gas Sector, Thermal Power Stations, Cement Plants, Chemical Process Industries, etc
• Brand Name: JK

Brahma transformers are characterized by extremely limited overall dimensions and are particularly suitable  for gas and heavy oil Burners in industrial applications. The main features of these range are limited weight, high efficiency and ignition power, single pole or double pole high voltage output , various connection and fixing systems. These transformers are used in different applications depending on their electric features.   TC_S... Description: Electronic ignition transformers for permanent operation for forced draught burners for gas and light or heavy oil Characteristics: permanent operation, single or dual pole, lateral or bottom isolators

We offer a wide range of Electrical Transformer that is appreciated for its sturdy construction and long life. Our expansive assortment of Electrical Transformer comprises Distribution Transformers, Power Transformers, Furnace Transformers, Heat-treatment Transformers, Multi Tapping Auto Transformers and other custom built Electric Transformers. We are credible Supplier and Distributor of Electrical Transformers from Mumbai (Maharashtra).

An instrument transformer’s role is to provide accurate inputs to protection, control and metering systems including revenue metering. To transform currents or voltages from a usually high value to a value easy to handle for relays and instruments. To insulate the metering circuit from the primary high voltage system. To provide possibilities of standardizing the instruments and relays to a few rated currents and voltages.

Our noteworthy entity is actively engaged in manufacturing, supplying, and exporting a wide range of electrical transformer in India.