Transformers Dealers in Kanchpada, Mumbai

Certain critical Equipment, especially Medical Equipment, require Solid State Voltage Stabilizers with Galvanic Isolation between Mains Input and Equipment. Also the Equipment needs to be protected against spikes, voltage, surges, glitches, noise, etc. which is not possible with conventional Servo Voltage Controlled Stabilizers.   A special type of Stabilizer, called C.V.T (Constant Voltage Stabilizer) is used for such applications. A CVT works on magnetic saturation principle, resonating with a tank circuit of High Q factor. When incoming Mains Voltage is low the capacitor provides the necessary additional gain in power, keeping the output voltage steady. On the other hand, when the Mains Voltage is high the leakage reactance drops the difference of voltage. This correction of voltage is instantaneous even for sudden dips and spikes. FEATURES: • Proven Technology • High Reliability • Fast Response • Output Short Circuit Protected • Rugged Industrial Design • High Efficiency • CMRR & DMRR noise rejection upto 100 dB • Can handle Inductive Loads

• Cooling Type: Dry Type
• Frequency: 50 HZ
• Material: Copper
• Power (VA): 50 Watt
• Input Voltage: 110V
• Application: Electrical

• Type: Open Type
• Brand Name: Aarti Electricals
• Voltage: 0-270V
• Phase: Single Phase
• Input Voltage: 240V
• Output Current: 0-6Amps
• Frequency: 50Hz
• Machine Type: Variac

We are one of the well-established Manufacturers and Suppliers of Isolation Transformers in Mumbai, Maharashtra. We use advanced software and machinery for the manufacturing of Isolation Transformers. Buyers from all over the country can place bulk orders for our Isolation Transformers. We have advanced facility for production and efficient logistics for the dispatch of Isolation Transformers across the country.

We are offering transformer oil. spel transol

Contact us for obtaining Burner Transformer in bulk and at nominal rates! We are enlisted amidst the trustworthy Suppliers of Burner Transformer located in Maharashtra, India. We source Burner Transformer only from the trusted manufacturers or vendors present in the market after checking against various quality parameters. Moreover, our modern transit facilities assist us in meeting the delivery deadlines with ease.

We are offering Nec make Ignition transformers suitable for Oil and gas firing Boilers/ burners/ ovens and other oil and gas firing systems. We supply complete models of nec make ignition transformers such as: Nec make ignition transformer 2 pole for oil firing systems input 230 volts, output 14,500 volts, 30 ma, 1 phase, interminent duty and continues duty 2X14.5 kv Nec make ignition transformer input 230v, 1 phase, 50 Hz, A.c  output :5 Kv, 7.5 Kv, 10 K.v, 12 K.v, 14.5 kv Etc. etc...... Current : 20 Ma and 30 ma Continuous and intermittent duty   Nec make Epoxy and damper moulded ignition transformers Nec make ignition transformer of 5 Kv, 7.5 Kv, 10 K.v, 12 K.v, 14.5 kv Etc. etc......Suaitable For The Following Make Boilers: Thermax boiler ignition transformer Nestler boiler ignition  transformer Double ace boiler ignition transformer IAEC boiler ignition transformer Fuelpac boiler ignition transformer Patel boiler ignition transformer Energypac boiler ignition transformer Combustion and concept burner ignition transformer Hi therm boiler ignition transformer Fuelpac boiler ignition transformer Maxima boiler ignition transformer Elite thermal boiler ignition transformer J.N Marshall boiler ignition transformer etc

We offering herco burner mounted ignition transformer. Combustion & control systems, mumbai offering herco oil and gas burner ignition transformer, herco boiler ignition transformer, herco burner mounted ignition transformer

We manufacture a wide range of transformer laminations using cold rolled grain oriented (crgo) steel in grades m6, m5, m4, m3, hi-b, zdkh, orsih, etc.

Mounting Block Mounting block is made from forging superior quality brass rods. With the help of connecting stud It is mounted on the phase boards which are of high quality insulating materials. The total number of mounting blocks in an OLTC depends upon the rating of the OLTC. Fixed Contact Fixed contact are made from Electrolytic grade copper bars. Copper Tungsten is tipped to fixed contact. This is the main contact point Moving Contacts Moving contact are made from Electrolytic grade copper bars. Copper Tungsten is tipped to moving contact. Moving Contact is used to establish a contact between Fixed Contact and Collector Ring. Collector Ring Collector ring is made of brass in 33KV OLTC, for 66 KV we use Copper Ring. It is main contact on which the moving contact rotates as and when the position is changed. There are 3 Rings in each OLTC. L-Connector Assembly L-connector assembly consist of 2 L-Copper Piece 2 flexible copper V-Bend strip. L-Connectors are made from L Shaped Copper Bars and V-Bend Strip are made from plain copper strips. These are used to connect the OLTC to the Transformer with the help of epoxy board.

• POWER RATING: 15 VA.

TOROIDAL TRANSFORMER SMALLER THAN EI TRANSFORMER. THINNER &LIGHTER THAN EI TRANSFORMER. PRODUCES LEAST LEAKAGE FLUX COMPARE TO EI & R-CORE TRANSFORMER. PRODUCE LEATS HEAT(ALMOST NIL)BECAUSE OF SHAP COOLING SERFACE IS AVILEABLE IN TOROIDAL TRANSFORMER IS MORE THAN ANU TYPE. MORE COMPACT DESINE & LOW COST.

Our organization has observed impressive rise as Power Transformer supplier, courtesy our ability to establish the International quality standards as per customer’s requirements from quality sources developed over the period of time with constant interaction. We are supported by a well-managed and automated warehouse system wherein we store the entire lot in a secured manner.

CRGO Slit Coils as per customer widths and grades. - Transformer core lamination of various shapes and sizes up to 1000 mm width. Step lap designs including longitudinal, longitudinal cross, cross variables yoke and also cross variable Yoke and Limbs. Standard 45 degree mitered cores. Rectangular shaped cores with or without holes can be processed. - BUILT-UP CORES for transformer and locomotive jobs.

“Tarapur” manufactures a range of Power Transformers upto      200MVA, 220kV Class  in categories such as Systems Transformer, Generator Transformer, Auto Transformer, Rectifiers, Furnace Transformer, Railway duty etc. These Transformers are manufactured at our state-of-the-art facility at WADA (near Mumbai).

We are a leading manufacturer of bushing metal parts for power, distribution ct & pt, dry type, cast resin transformers. We manufacture metal parts as per is 3347, din 42530-42531-42532, bs 2562. Besides the standard metal parts we can also manufacture products as per customers design. All the metal parts are supplied with the complete set of accessories as per the standards. Rating class : 1 kv, 3 kv, 12 kv, 24kv, 36 kv rated current : 250 a, 630 a, 1000 a, 2000 a, 3150 a plating: tin, nickel, silver material specifications of lvhv bushings porcelain parts ceramic ker 110.1 to din 40685 brown colour to ral 8016 brass parts cuzn40pb2 ms 60f34 din 17673 or gd-ms 60 or gk-ms 60 din 1709 copper parts e-cu f25 din 40500 steel parts crni or st 37 din 17100 or din 125 n.b.r. Parts asbestos free nitrile rubber hardness shore 65-70 din 53505.

• voltages: 11kV, 22kV , 33kV

Furnace transformers supply power to electric furnaces of various types like Arc furnace, Induction arc, Submerged arc, Rectifier duty & Ladle furnace transformers. In order withstand repeated short – circuit conditions and high thermal stress and to be protected from operational voltages resulting from the arc process, these transformers are designed after considering demanding conditions. The furnace transformer supplying power to furnace has to handle extremely high value currents in the order of kAmps depending upon furnace ratings.

• Type: Power Transformer
• Usage: Control Panels, Industrial Use
• Color: Black, Blue, Gray, Brown, Red, Pink
• Working Frequency: 50hz, 60hz
• Speciality: Easy To Install, Electrical Porcelain, Sturdy Construction, Superior Finish
• Condition: New, Used
• Warrenty: 1year, 2years, 5years

We are offering low tension current transformer (l.t.c.t) low tension current transformers are made from annealed crgo core having very low losses thus reducing the ratio and phase angle error to minimum. The operating voltage is 660 v and 50 & 60 hz frequency. Standard secondary ranges available are 1 a and 5 a. All ct’s conform to is 2705, iec -185 & bs standards. Types of c.t’s manufactured are, •ring type minimum id from 20 mm to •wound type •portable typse

servo transformers, ups systems, Inverters, Transformers

Transformer Lamination

Electrical Laminations, motor stampings, Motor Stators

Oil cooled Transformer, Current Transformer, refractor telescope

Voltage Transformers, sheet metals, Metal enclosures

transformer laminations, transportations services, Goods Relocation

Transformer Accessories

stamping rotating machine, stampings

power stabilizers

Transformers, testing measurement equipment, Electrical Relays

Transformer, Electrical Fitting, electrical light, Tube Light Choke

Dry Type Transformer, Special Purpose Transformer, Distribution Transformer