Transformers Dealers in Kanjurmarg East, Mumbai

CG offers converter transformers, which operate at the fundamental frequency of an alternating system. These are designed for one or more output windings connected to the rectifier loads. We offer Induction Thyristor duty transformers suitable for 3 Pulse 6 Pulse 12 Pulse 18 Pulse drive configurations. It is possible to make major changes in the output current and voltage by using a transformer with a different rectifier configuration. Extra care is taken in design and manufacture of Induction Thyristor transformers due to the harmonics that are likely to appear in the transformer windings. These harmonics are likely to increase the stray losses in the transformer.

Sited in Mumbai, we have built a wealth of experience as the Manufacturer and Supplier of the Converter Transformer’s unbeaten range across the country. Quality is what we strive upon; thus, each Converter Transformer offered by us is utterly compliant with industry standards. For the use in various smoothing and current limiting applications, we provide the Converter Transformer of ONAN and AN types with high current AC-DC chokes, at cost-effective prices.

• Size: Customize
• Color: Black, Red
• Material: MS
• Weight: 50-250 gm
• Surface Finish: Color Coated
• Packaging Type: Box

• Phase: Two
• Brand Name: Atlas
• Cooling Type: Dry type/Air cooled
• Frequency: 50 Hz / 60 Hz
• Capacity: 100VA
• Input Voltage: 0-380V,415V,440V
• Output Voltage: 24V,220V,230V
• Power Source: AC
• Material: MS,Aluminum,CI,etc

• Speciality: Electrical Porcelain, Four Times Stronger, Proper Working
• Output Type: AC Single Phase
• Automatic Grade: Automatic
• Tensile Strength: 0-25Mpa, 100-125Mpa
• Warrenty: 2years
• Production Power: 100-250kw
• Temperature Capacity: High Temperature

We are the main supplier of this product.

Demountable Transformer Science Labs A large-scale transformer, ideal for classroom. The coils are fitted with intermediary outputs providing many transformation ratios. Moreover, one of them has a mains cable so that you do not required an external power supply unit. Consisting of : A I magnetic circuit made up of highly permeable U-shaped metal sheeting, which can be closed via two clamps with tightening screws. B Section 40x40mm. length 150mm-Height 170mm. C One coil of 6000turns, 350 ohms, 1 Max: 0.2A. Intermediary 2000 turns output used. D One coil of 600 turns, I max. 2.5A. Mainly to create the transformer primary. Provided with power supply cable. E One coil of 1200 turns, 12.5 ohms, I max: 1.25A fitted with intermediary 400 and 800 turns outputs. F One coil of 72 turns I max: 12A, has intermediary 6,30 54 and 66 turns outputs. Any other coil of different turns available on request.

Rectifier transformer Proprietary high voltage rectifier stack design consists of module cards with silicon diodes with RC protection across each diode to protect the bridge from the stored charge from the ESP. High impedance transformer with in-built current limiting choke.

• Input: 230Vac
• Output: 120VoltsAC
• Current Capacity: 8
• Weight (Kg): 13.25

Compact design, ONAN cooling with conservator & breather Hermetically Sealed Construction with corrugated expandable fins EHV grade mineral oil used for ONAN cooling Unique insulation system for silicon oil filled transformers High impedance transformer with in-built current limiting choke Electrostatic Shield between Primary and Secondary windings Proprietary high voltage rectifier stack design consists of module cards with silicon diodes with RC protection across each diode to protect the bridge from the stored charge from the ESP Complete internal assembly is lid mounted for ease of maintenance and repairs

• Voltage: 230 V
• Output Voltage: 2x6500 V
• Current: 2,1 A
• Frequency: 50 Hz
• Amps: 35 mA

• Type: Electronic Transformers
• Certification: ISI Certified, ISO 9001:2008 Certified
• Usage: Control Panels, Industrial Use, Power Grade
• Color: Green, Grey, Light Green, Sky Blue, White
• Specialities: Easy To Install, Electrical Porcelain, Four Times Stronger, Proper Working, Sturdy Construction, Superior Finish
• Condition: New, Used
• Frequency: 50hz, 60hz
• Operating Mode: Automatic, Fully Automatic, Semi Automatic
• Tensile Strength: 0-25Mpa, 100-125Mpa, 125-150Mpa, 150-175Mpa, 175-200Mpa, 25-50Mpa, 50-75Mpa, 75-100Mpa
• Production Power: 100-250kw, 250-500kw, 50-100kw, 500-750kw

• Color: Black, Grey, Silver, Brown, White
• Material: Iron, Stainless Steel
• Voltage: 0-110 V, 110-220 V, 220-440 V
• Driven Type: Electrical
• Condition: New, Used
• Packaging Type: Box, Carton

Auto transformer is kind of electrical transformer where primary and secondary shares same common single winding. So basically it’s a one winding transformer. We hereby introduce ourselves as a manufacturer of dry type power transformers and reactors. We are established in this field since 2003. Our Dry Type Transformer adopt high quality low loss silicon sheet and arranged non-bobbin coil winding technology, and we apply vacuum pressure impregnating (VPI) process and solidify baking process to achieve insulation class H or C. Our transformers are widely used on any occasions where voltage is below 1000V and frequency below 400 Hz, and equipment’s which require voltage to step up or down. For small to medium capacity transformers, we apply enamel wire winding, and we apply foil winding for large capacity ones. Features1) There are air flows between coil's layer to layer and between coil to core, resulting fast heat dissipation, and low temperature rise.2) High grade iron core and winding can be wire or foil.3) Small volume, light weight and good workmanship.4) After vacuum pressure impregnating, the whole transformers and reactors are moisture proof and mildew proof. Insulation class H or C.5) Lower audio noise.6) Nomex based insulation system for foil winding transformers. Type1). Step up Auto Transformer 2). Step down Auto Transformer TestingOur all magnetics are tested as per routine test mentioned as per IS2026. We can carry out other type testing as per your need. Applications of Auto TransformersCompensating voltage drops by boosting supply voltage in distribution systems. Auto transformers with a number of tapping are used for starting induction and synchronous motors. Auto transformer is used as variac in laboratory or where continuous variable over broad ranges are required. Our products range is as under: 1) Single/3 phase Transformer, upto 300KVA, 50Hz - 400Hz. 2) Scott Connected (3phase - 2phase conversion)/ Open delta type (3phase-single phase conversion) 3) Input Chokes for A.C/D.C Drives, from 1hp to 750hp drives 4) Output Chokes for A.C/D.C Drives, from 1hp to 750hp drives 5) DC filter choke 6) Harmonic Filter Choke 7) Transformers for Plasma Welding Machines8) Transformers with induction heating purpose.

• Brand Name: BE
• Cooling Type: Air Cooled
• Phase: Three Phase, Single Phase
• Core Type: Bar CT, BPL City
• Material: CRGO And Copper

• Number of Outlets: 4
• Surge Suppression: 8.3 A
• Noise Suppression (dB): 35 to 65
• Max Energy Dissipation (J): 680
• Max Power Capacity (watts): 1000
• Power (VAC): 120
• Power (Hz): 60
• Cord Length (ft): 6
• Length (in): 10 1/2
• Height (in): 7 1/4
• Width (in): 7 1/4

MM30 is a Microprocessor based Comprehensive Motor Protection Relay designed for Medium and Large Motors Features: Auto setting of parameters Draw out enclosure 8 digit alpha numeric display Real Time Measurements Measurement and display of actual & trip data recordings. 8 LED’s for fault indication. Control on number of starts of motor Starting sequence control. During start-up of the motor, the unit can control an output contact to automatically manage the starting transition. RS485 port for communication with Modbus Protocol.

SERIES SCT, ENCLOSED MEASUREMENT CTS The Current Transformers (Cts) are designed for ease of mounting and access, as well as to minimise space requirements. The standard frames, which include overlapping current ratios, permit selection for any cable or busbar system. Enclosed, Tape Wound and Resin Cast Measurement Cts and Tape Wound and Resin Cast Protection Cts for DIN Rail, Busbar and Bracket Mounting are offered but CTs beyond the range specified in this catalogue, also can be offered on request. MEASUREMENT CTS Measurement CTs are required to transform the primary current, at various classes of accuracy, as specified by the class designation, over a current range from 5% to 120% of its rated primary current. The design of this type of CT requires the inclusion of a core and winding which will, when connected to its rated burden, perform within the limits of error as indicated by the standards specifications. It is an advantage for a measurement CT to saturate above this range, which provides a protection against damage to instrument by limiting the secondary current, when surge current or faults appear in the primary circuit.

  DRY TYPE TR Can be used in Zone 1 and Zone 2 Zone 21 and Zone 22 Class I, Zone 1 and Zone 2 Class I, Zone 1, Group B, C, D Flameproof enclosure (Ex d llB+H2) Enclosure: carbon steel, stainless steel Built-in dry-type transformer can be used for step-up and step-down in distribution system Six type of rated capacity: 5kVA, 15kVA, 3OkVA, 45kVA, 60kVA, 75kVA. Equipped with a specialized hinge structure which can prevent damage to the flameproof joints when opening and closing the box,; greatly prolongs the service life of the box. Special user requirements incorporated on request. ANSFORMER

servo transformers, pcb transformers, Ventilated Transformer

Electrical Laminations, aluminium die casted rotors

oil cooled power transformers, Oil Emerged Transformer, regulator rectifiers

Power Transformers

air cooled transformers, Voltage Stabilisers, transient filter, Transformers

Transformer Accessories, bearing resistance temperature detector

We are offering best Brass Transformer Parts supplying company.

Transformer Stampings, transformer laminations

Power Transformers

Power Transformers