Transmission Seal Dealers in Eastern Express Highway, Mumbai (61 products available)

• Material: Rubber
• Thickness: 20 mm
• Usage/Application: Oil
• Size: 4 inch
• Hardness: 60 HRC

• Applications: Oil/Chemical/Milk tankers,Railway wagons,Carboys etc,

Our Sunbird II plastic sealing device comprises of flat rectangular capsule receptacle and flat anchor shaped insert, both connected by a flexible connecting cord. Once the locking mechanism is meshed it cannot be opened or tampered. This seal dispenses with the use of heavy and cumbersome sealing pliers and can be locked securely by hand. Also due to its dual-sided locking mechanism, the entry of the insert into the capsule is not restricted to one particular side alone. The "Sunbird-II" plastic seal can be effectively used on Oil Chemical Milk Tankers Manholes and Valves, Storage Tanks, Electric Water Meters, Containers, Railway Wagons, Carboys, Jerry Cans Etc. High-rise monogram on one side and high-rise 6 digit non-repeat serial numbers on the other side of the capsule is provided on "Sunbird-II" plastic seal.

AUDCO (L&T) Butterfly Valve PN 16 (Slim Seal) Gear Operated Body: Cast Iron Liner: Nitrile Rubber Disc: CI Coated with Nylon Shaft: CS Operation: Worm Gear Operated.

WE MASTERS IN OFFERING WIDE RANGE OF OIL SEALS FOR ALL KIND & TYPES OF INDUSTRIAL GEARBOXES & PUMPS WHICH ARE KNOWN FOR THEIR FEATURES LIKE DURABILITY & PRECISION.   WE PROVIDE OIL SEALS WHICH ARE MANUFACTURED FROM FINEST QUALITY OF RAW MATERIAL LEADING TO LONG LIFE AND HIGH PERFORMANCE AT REASONABLE PRICES.   OIL SEALS EXCLUSIVELY OFFERRED ARE FOR BRANDED INDUSTRIAL GEARBOXES & PUMPS., THE FEW OF WHICH HAS BEEN LISTED BELOW :    BRANDS : ● CPEC GEARBOXES ● RADICON GREAVES GEARBOXES ● ELECON GEARBOXES ● SHACON GEARBOXES ● OTHER GEARBOXES    TYPES : ● RUBBER & MECHANICAL OIL SEALS.    SIZES : ● CPEC (R, RV MODEL) : 11, 17, 22, 30, 35, 40, 50, 60, 70, 80, 90, 100, 120, 140, 170. ● RADICON GREAVES : 112, 162, 200, 237, 287, 337, 4, 5, 6, 7, 8, 9, 10.5, 10”, 12” , 14”, 17”. ● ELECON : 1 5/8, 1 ¾, 2, 2 ½, 3, 3 ½, 4, 5, 6, 7, 8, 9, 10.5, 10”, 12” , 14”, 17”.    RATIO : ● MIN. 5 : 1 to MAX. 70 : 1.   NOTE : WE PROVIDE SPARES FOR GEARBOXES AS PER STANDARD & NON STANDARD REQUIREMENTS. 

We are counted amongst the prominent manufacturers, exporters and suppliers of mechanical seal. The wide range of mechanical seals provided by us is manufactured using very high quality raw material. Our mechanical seal is equivalent to john crane seal ,epil and thus holds high demand in the market. We offer different types of mechanical seals as per customer requirements. We avail our mechanical seal at very competitive prices in the market. varieties available : mixer and agitator sealsin-line sealsptfe sealssingle cartridgetandem cartridgeseal potssingle spring sealsoutside sealsmetal bellows sealsdouble cartridge

• Material: Rubber,Rubber
• Color: Black,Black
• Usage: Industrial
• Size (Inches): 1 inch
• Packaging Type: Carton Box
• Shrink Free: Yes

• SS304: Economical
• Strapping: Carton sealer

We are offering Strapping and carton sealing machines from Semi auto to fully automatic. All options available.

Explosion protection to-CENELEC-IEC-NEC Can be used inZone 1 and Zone 2Zone 21 and Zone 22Class I, Zone 1 and Zone 2Class I, Division 1, Groups A, B, C, D Ex d, Ex e structure; available in stainless steel, nickel plated brass or galvanized carbon steel. Dual seal, suitable for both armored and unarmored cable.

By keeping customer’s demands and requirements in our mind, we are offering them a desirable range of GC Septas. Our GC Septas are made up of quality assured material and also tested thoroughly at many stages for their quality assurance. pack 100

INDUCTION WADS FOR HDPE CONTAINER With the firm commitment towards quality, we are designing and bringing forth a range of induction wads for HDPE Containers. All our products are made employing latest machines in sync with the norms and guidelines laid down by the industry. The products we offer are widely appreciated in the market for having features like seamless finishing, attractive looks and being safe to use. Moreover, a team of deft experts ensures that these induction wads are delivered to the clients within the stipulated time-frame.Owing to the sophisticated manufacturing unit and deft experts, we have been able to come up with a range of Induction Wads for PET Containers. Developed in coordination with international norms and guidelines, these are widely used to prevent products from leakage. Customers can avail these wads from us in a variety of colors, designs, sizes and shapes, as per their needs. Owing to resistance against abrasion, attractive looks and splendid finishing, our offered wads are widely applauded by the clients. INDUCTION WADS FOR GLASS CONTAINER Available with us is a wide and excellent collection Induction Wads for Glass Containers. The products we offer are made using foil layer and other material in sync with the norms & guidelines laid down by the industry. All our products are widely appreciated in the market for their splendid finishing, dimensional accuracy and re-usability. Moreover, these products find their extensive applications in pharmaceuticals, food and many other industries for packaging.   HIGH BARRIER INDUCTION WAD Supported by a team of deft experts and sound production facility, we have been able to come up with a range of High Barrier Induction Seals. All our products are made using excellent quality material along with following non-contact method of heating a metallic disk to foe sealing the plastic & glass containers. All our products are well-known in the market for having features like seamless finishing, resistance against abrasion and durability. These products are extensively used for making PET, HDPE and PP containers; leak-proof.

• Finishing: Polished
• Packaging Type: Carton Box
• Specialities: Heat Resistant, Fine Finish

Use for sealing of rotating shafts, above all in engineering construction and construction of domestic machines, and in the motor vehicle industry. Varied types and designs for various requirements and different instances of installation. Solutions specific to customer within the comprehensive Standard Range; upon enquiry Cassette seals, valve stem seals, damper seals and guide sleeves for gearboxes 'O' RING, OIL SEALS Ready to fit Sealing elements for leakproof sealing in Mechanical Engineering Instruments, Constructions, Domestic Appliances Industries and Automotive Control Engineering. PNEUMATICS THE USE OF PNEUMATIC SEALS - INTRODUCTION Pneumatics, which is one area of fluid technology, is the science of the behaviour of gases. The term pneumatics, which is derived from the Greek pneuma, is today mostly considered to be the transfer of energy by compressed air. Pneumatic drives and actuations, used to an increasing extent for the mechanisation and automation of production processes, are essentially constructed from valves and cylinders. The working of pneumatic equipment requires the sealing of volumes of air under pressure. Pneumatic seals are divided into cylinder seals and valve seals. The differentiated sub-division of valve seals, similar to the classification used for cylinder seals, would not be sensible. Valve seals are special seals which conform to the differing valve constructions of individual manufacturers. HYDRAULIC SEALS USE OF HYDRAULIC SEALS Different requirements and loads in numerous instances have led to the development of various types of seals. Hydraulic seals can be categorised according to their function and design Moreover, hydraulic seals are sub-divided into seals with a symmetrical cross-section and such with an asymmetrical cross-section. Asymmetrical seals are designed with interference on the entire axial width of the static diameter to achieve a firm seat in the groove. Therefore, the correct pre-load on the dynamic diameter is only reached after fitting into the housing SHAFT SEALS These Shaft Seals prevent the excessive wear and heat buildup at the shaft often caused by internal pressure. Economical seals are reliable at pressures up to 300 psi. Built with touch fluoroelastomer sealing element, strong metal case and large, pressure-activated PTFE anti-friction element. Can be used in a broad range of equipment, in rotary or reciprocating motion.    

• Material: Aluminium
• Shape: Round
• Packaging Type: Box
• Brand Name: JSA
•  :  
• Usage/Application: Heat sealing foil for Curd,Water cup,Pharma products

• Material: Sealing Laminate /
• Cap Type: Induction Type Caps
• Grade: Commercial
• Capacity: 10 ml to 200 L
• Diameter: 0.4 to 2 mm
• Thickness: 2 mm

Corner joints & T-Joints for Strong mechanical joineries,Single point & Multi point locking,Available in Anodized and Powder coated (Various color of RAL code)

• Material: HDPE
• Color: All colours
• Dimensions: 28 MM Seal Cap
• Neck Size: 2'8

Application: Hot Oil, Refineries & Petrochemicals, Oil & Gas, Pharmaceuticals, Food & Fertilizers. Well —equipped Design facility with latest Computer hard-wares and Design soft wares, handled by expert Design team. The well-equipped manufacturing facility is manned by skilled Engineers and Technicians, capable of producing the finest quality Mechanical Seals.

• Material: Rubber
• Size: Customized
• Hardness: 40-70 Shore A

We offer a broad range of qualitative Drum Capseals - Printed, which is used in various industries such as, oil, lube, chemical, pharmaceutical industries and many more . We offer these Printed Drum Cap Seals in size 50 mm and 20 mm also widely known as 2", 3/4", 1", 3", 4", 7", 72 mm, 75mm, 80mm, & 85mm. We also offer customized solutions for our respected clients in order to cater their requirements. Our product is made from finest quality of 'Tin free steel & Plastisol' in order to achieve the best crimping / sealing results. We can create a new design for each of your products or use your existing artwork – a company logo or even a photograph! These labels can be used on any of our capseals or cap with a flat surface. We know your brand is important to you, and our new laser printing system from Kirao means you’ll get perfect color reduction and the highest quality every time.

• No of Nozzles per DCP module: 27 (max.)
• Nozzle Spacing: 1.5 meters
• Rim Seal protected from one set: 40 meters

Floating roof tanks are considered to be the safest hydrocarbon storage vessel with respect to its vapor suppression ability. Even in these tanks, there exists an area, which exposes the hydrocarbon vapor to air, which is known as rim seal area. The SHOOTFIRE Fire Protection System for Floating Roof Tank is a fully automated extinguishing system. It is specifically designed and manufactured for extreme fast detection and extinction of any type of rim seal fires as per the National & International Safety Standards.

We offer Kwik Seal.

automotive rubber oil seals, automotive rubber o-rings, molded rubber o-rings

Rubber Door Seals, rubber automotive accessories, rubber glass run channels

aluminium lidding foils, printed lidding foils

epe liner, sealing wads, Packaging Materials, induction foils, Epe Wads

Wire Seal VS - 55, Container bolt Seal

drum seal, Jute, Packaging Materials

Rubber Door Seals, automotive rubber profiles, rubber window channels

The mouth of wide neck bottles can be sealed with a highly secure induction wad using an induction sealing machine. Secure Induction Wads incorporate a highly secure hologram image on the viewable side of the seal. This can be delivered with foam of board backing.

Induction Sealing Wads