Transmission Seal Dealers in Mindspace, Mumbai

we are offering teflon bellow seal. seal proof make teflon bellow seal is externally mounted low pressure mechanical seal with metal free contact parts due to corrosive pumping media is designed for highly corrosive chemicals such as concentrared acids, chemically active organic compound, corrosive and abbrasive liquid.this seals are independent of direction of rotation.seal ring face can be changed or replaced due to its design feature.the face is positively driven by integral lugs which is on bellow,it imparts smooth drive to the face.

We bring to our clients an exclusive range of Rubber Oil Seals that are made using the superior quality stainless steel and rubber. Our range of Rubber Oil Seals is widely used for gearbox, wheel, engine, and steering. To attain complete client satisfaction, we offer these Rubber Oil Seals in customized specifications and at market leading prices. Highlights : Heat resistancePremium quality rubberFlexible performanceAbrasion resistance

• Size: Available In Different Sizes
• Type: Rubber Kits
• Material: Neoprene Rubber, Rubber, Silicone Rubber, Rubber & Teflon
• Shape: Round
• Application: Sealing
• Color: Black, Green, Red, White, Available In Different Colors
• Feature: Accurate Dimension, Easy To Install, Good Quality
• Condition: New
• Country of Origin: India

O rings are used to block a path which may otherwise allow a liquid or a gas to escape. The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.

While packaging, we ensure that the products enclosed are protected from external damaging factors inclusive of vibration, mechanical shock, compression or temperature. Buyers prefer us for our practice of delivering the orders within the pre-decided time frame. The offered Shaft Seal Assembly is designed to prevent the refrigerants and oil leakages and to eliminate hidden flaws and unnecessary breakdown.

We are offering sulphur leak seal solution mix. 1sulphur leakage can be arrested with dozwin solution mix. its easy to apply, light weight, non corrosive and high temperature resistant.

• Size: 10inch, 2inch, 4inch, 8inch
• Material: Aluminum, Metal, Neoprene Rubber, Nitrile Rubber, Rubber
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Application: Industrial
• Color: Black, Golden, Grey
• Condition: New, Used
• Feature: Accurate Dimension, Easy To Install, Fine Finish, Good Quality, Heat Resistant, Robust Construction, Unbreakable

• Material: Rubber
• Finishing: Polished
• Shape: Round
• Color: Red
• Condition: New
• Automation Grade: Manual
• Usage: Oil Industry
• Packaging Type: Packet, Carton Box
• Outer Diameter: 20mm
• Working Pressure: As Per Client
• Sealing Type: Mechanical
• Specialities: Heat Resistant, Good Quality, Fine Finish, Easy To Install
• Overall Dimension (LXBXH): 390X170X360mm, 490X270X460mm
• Size (Inches): 2Inch, 4Inch, 6Inch, 8Inch, 10Inch
• Type: Industrial Seals
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Tensile Strength: As Per Client
• Working Temperature: As Per Client
• Country of Origin: India
• Inner Diameter: 30mm, 40mm, 50mm
• Suitable For: High Temperature
• Chemical Resistance: Yes
• Seal Width: 10mm, 20mm, 30mm, 40mm
• Seal Length: 100mm, 200mm, 300mm
• Max Hardness: As Per Client
• Temperature Range Deg C: As Per Client

• Brand Name: SHEKO

We are manufacturers of high pressure hydraulic filter assemblies, filter elements, hydraulic seals, hydraulic cylinders, etc.

• Brand Name: Trade Security Solutions
• Material: Carbon Steel
• Color: Any (Yellow, Blue, White, Red, Pink etc.)
• Country of Origin: India
• Packaging Type: Carton Boxes

The Roto Seal is a durable plastic and wire seal that can be applied without a tool This is a Twist Type Roto Seal used for securing Drums and Meters Much better than anchor seal

We are offering induction cap sealing wads

• Features: Excellent finish, Chemical resistance, High durability, Negligible maintenance, High temperature resistance, High tensile strength

Mechanical Seals that we offer are in compliance with the standard of DIN24960. We offer single face, balanced and metal bellows seal, which can be rotated at will. Our Mechanical Seals are widely applied in steel industry, mining, petrochemical industry, refining and fertilizer industry. We make available Mechanical Seals in bulk and at market leading rates. Also, timely delivery is guaranteed.    More About Mechanical Seals : The rotating O ring and flexible carbon ring without compensation function and the movement of bellow without resistance are suitable for high temperature and high viscosity mediums. Sub-materials of friction and auxiliary materials should be selected according to operation condition. Specifications : Sealed Medium : Oil, acid, alkali, average corrosive mediums, etc. Pressure in the sealed chamber : Less than 2.5Mpa (with external pressurization) less than 1.5Mpa (with internal pressurization) Temperature in the sealed chamber : -20~400 Linear velocity : Less than 15m/s

We are offering dowty bonded seals. the bonded seal was originally designed to replace copper type washers in high-pressure systems. The bonded seal comprises a metal washer and an elastomeric ring bonded inside the diameter. The metal washer prevents over-compression and limits deformation of the elastomeric ring. Advantages reliable low and high pressure sealing high and low temperature capabilities bolt torque is reduced with no loss of tightening load materials elastomer component is available in nbr 70 (standard) and (special order materials) nbr 90, fkm (viton ®) 70 & 75 shore a, epdm 75 shore a washer component is carbon steel, zincyellow zinc plated or stainless steel (on request).

• Length: 15-30mm, 30-45mm
• Packaging Type: Plastic Packet
• Specialities: Rust Proof, Non Breakable, Heat Resistance
• Shape: Rounded
• Color: Available all color
• Max. Voltage: 220V
• Mechanical Life: 2 Year

We are counted as one amongst the eminent Threaded Seals Manufacturers & Exporters from India. The cable gland having external and internal sealing arrangement must be fitted with entry Thread Seals in order to provide IP66 Seal. Additionally, customers are eased with the availability of the SES Entry Thread Seals in varied specifications confirming to international standards. Size : M20 to M100

we at vardhman bearingss veer enterprises are engaged in offering a comprehensive range of Industrial Rubber Products. These products are at par with the standards of ASTM, BS, DIN and IS. Owing to the optimum quality. Our products are widely used in Pharmaceutical, Food, Automotive, Chemical and Engineering Related Industries. For the maximum convenience of our clients, we also provide customized services & packaging for these products as per the specifications given by our clients.

• Material: Silicon
• Condition: New
• Packaging Type: Box
• Application: Connecting Joints, Pipes, Tubes
• Feature: Easy To Install, Fine Finish
• Thickness(mm): 2.0, 1.0

We are one of the leading Manufacturers, Exporters and Suppliers of Induction Sealing Wads for HDPE Bottles. We have rich industry experience that we utilize in bringing forth the best quality, flawless and affordable Sealing Wads for Plastic Bottles. Furthermore, our skilled engineers make sure that the Sealing Wads are manufactured as per the international standards. We only offer long lasting Induction Sealing Wads that preserve freshness.

We are one of the major manufacturers of carbon products. We can supply you the following products graphite sealing rings, seals, buhes, rods, washers, raschig rings and more.

This Seal is specially designed for high Temp - Application and Provided with Drive lugs which Drives the Seal faces Positively to Protect bellows from Tortional & Tresses. Also used for high viscocity applications. High temperature Metal Bellows is used for high temperature application such as refinery, Petrochemical Industries. Due to its narrow seals cross section design, can replace most type of seal used in ANSI pumps. Secondary seals are made up of Grafoil which can withstand high temp upto 425 deg C. it is resistant to abrasive particles in pumpage and not Shafts/Sleeves fretting. The edge welded bellow are produced by sta mping out a male and a female diaphragm and welding them edge to edge. These diaphragms typically have several ripples running from ID to OD. These seals can be provided as Cartridge seals in single and double design. Metal Bellows cartridge seals are ready to install Mechanical Cartridge Seals. All parts of mechanical seals from a compact unit together with the shaft sleeve, cashing parts, connection flange & torque transmission elements. Cartridge seals benefits is to reduce down time periods and enables mechanical seals to be installed in hand to hand access place. We have different models.

We manufacture a wide range of rubber seals that are manufactured using premium grade material such as silicone, viton, neoprene, nitrile, epdm, butyl, SBR, natural, polyurethane, hypalon, poly acrilic and many others. Precisely designed these seals have gained lots of recognition in the market for their exclusive features.  

We offer superior quality agitator seal in the industry. The dry running agitator seal supplied by us are recommended to be used in vacuum condition. These seal can be easily installed and repaired. Besides our agitator seals are effectively used in top entry mixer vessels the chemical as well as pharmaceutical industry. Apart from the above we are one of the chief standard agitator seal manufacturers in India. Main Features of the HR5 Dry Running Seals are: Simple, rugged drive design that withstands shaft movement vibration & deflection. Seal design eliminates the need of auxiliary equipments for cooling & lubrications for mixer application. It eliminates the possibility of product contamination, since there is no use of barrier fluid. Can be used in high vacuum applications. These seals are very cost effective. Seals with bearing can be provided for vessels having greater misalignments with special arrangement. Applications: Used in top entry mixer vessels in pharmaceuticals & chemical industries. Material: Seal Faces: Carbon Vs Ceramic/Sic./TC Secondary Seals: Nitrile/ Neoprene/Viton/PTFE Metal Components: SS-316 Operating Limits: Shaft Dia.: 25 to 100mm Pressure: up to 1.40 MPa Temp.: -50 to 150°C Speed: up to 1 m/s

• Shaft Diameter: 1/2" to 5.0"
• Pressure: 5 bar
• Temperature: 25oC to +150oC

Conical Spring Seal (LIE/704): These seals are suitable for gear pumps, water, submersible and monoblock pumps and marine products. Single coil with a conical unidirectional springs are used which is self cleaning and highly dependable in arduous services. The flexible duck bellow is excellent for self aligned axial and radial shaft movement. Material Of Construction Sealing faces : Carbon, Silicon Carbide, Tungsten Carbide , Ceramic Metal Part : S.S 304 , SS 316 Secondary Seal : EPDM , Viton , Neoperene  

• Density: 1.05 ± 0.2 gm/cm3
• Dielectric Strength: 12 KV/mm. (Min.)

Insulcap is used to seal the ends of all types of Heat Shrink Cable End Caps to protect from ingress of watermoisture. The caps are manufactured from high quality cross linked polyolefin material.Compatible with most commonly used Cable Jackets i.e. XLPE, PVC, PILC or Rubber Sheathed Cable.Hot Melt adhesive lining provides permanent seal on irregular cable sheaths.Excellent resistance to weathering, moisture, contamination and adverse environmental conditions, according to IP 68 (Ingress Protection).Tamper Proof Application: Custom Logo Print with special non- removable Ink marks permanent seal on End Cap after Shrinking, thereby avoiding claims in case of Pilferage of Cable length.

• Material: Neoprene Rubber
• Width: 100-500mm
• Feature: Easy To Fir, High Grade Material Used, Oil Resistatn, Premium Quality, Water Prood

➤ diaphragms are sealing agents, used as moveable membranes to prevent two or more components from leakage and friction. The flexible nature of this seal allows pressure effects to cross the barrier but not the material being contained. ➤ we can manufacture rubber diaphragms which are bonded with brass, mild-steel or stainless-steel studs. We also manufacture diaphragms that are metal inserted, gasketed, teflon laminated or that are reinforced with fabric, nylon, canvas, wire mesh, etc. ➤ applications: electrical & pneumatic control valves, pressure regulators, saunders valves, solenoids valves, high pressure pumps, actuators, gas regulators, angle valves, brine filter valves, dust collectors, spray pumps, etc

Face Materials:      Stellite, Carbon, Ceramic, Tungsten Carbide, Silicon Carbide, LecrolloyMetal Parts:            SS 316, SS 304Secondary Seal:      Elastomers, PTFE Applications Water PumpsCirculation Pumps for central heatingChemical Process PumpsSewage and Submersible pumps Seal Characteristics: Single actingUnbalancedInside mountedDependent of direction of rotation Operating Limits: Shaft Diameter d1 : 9 ... 100 mmPressure p : 10 bar (max)Temperature t : _20 + 1200 CVelocity v : 20 m/secsingle conical helical spring, unbalanced seal with '0' ring as secondary sealing member. Various seal face materials and elastomers can be offered for wide service application. As the torque transmission is done by conical helical spring these seals are dependent of the direction of rotation. Direction of rotation is seen from the drive end of the shaft. Clockwise rotating shaft requires right handed spring and anticlockwise rotating shaft requires left-handed spring. For easier fitting, the conical helical spring should be pushed on the shaft with a twisting motion in the sense of the spring unwinding. This movement enlarges the diameter of the spring, enabling easy fitment.Face Materials:      Stellite, Carbon, Ceramic, Tungsten Carbide, Silicon Carbide, Lecrolloy Metal Parts:            SS 316, SS 304Secondary Seal:      Elastomers, PTFE Applications Water PumpsCirculation Pumps for central heatingChemical Process PumpsSewage and Submersible pumps Seal Characteristics: Single actingUnbalancedInside mountedDependent of direction of rotation Operating Limits: Shaft Diameter d1 : 9 ... 100 mmPressure p : 10 bar (max)Temperature t : _20 + 1200 CVelocity v : 20 m/secsingle conical helical spring, unbalanced seal with '0' ring as secondary sealing member. Various seal face materials and elastomers can be offered for wide service application. As the torque transmission is done by conical helical spring these seals are dependent of the direction of rotation. Direction of rotation is seen from the drive end of the shaft. Clockwise rotating shaft requires right handed spring and anticlockwise rotating shaft requires left-handed spring. For easier fitting, the conical helical spring should be pushed on the shaft with a twisting motion in the sense of the spring unwinding. This movement enlarges the diameter of the spring, enabling easy fitment.