Tube Fittings Dealers in Goregaon, Mumbai

Application · Hydraulic, Pneumatic Features · Hydraulic, Pneumatic, Lubrication · Design : 37' · Material : stainless steel 316,304 · Standard according to SAE J514/ISO 8434-2 · Useable with either metric or inch tubes or hoses Specification · Maximum operating pressure : 610 bar at 38'c · Operating temperature range 427'c Size · Fractional Size : 1/4” to 1” · Metric Size : 6mm to 25 m,

For high pressure as well as vacuum and other critical applications, the plant designers have no other alternative but to use a most reliable, safe and leakproof pipe connection.AK Industries proven design of its products in the fields of Hydraulics, Pneumatics and Instrumentation assures you of maximum reliability and years of trouble free service under adverse conditions and rigorous operating environment.  AK Industries design and manufacture the fitnest fittings. These fittings are compatible in dimensions to most of the reputed international makes, so designed that interchangeability is possible. The A.K.I double ring connection is a high safety device operating by compression. It avoids threading, soldering, swaging or crimping the tube & permits repaid, easy and reliable connections where dismantleable tubes require perfect tightness, both under pressure and high vaccum levels as well as under severe temprature and vibration conditions.  Features:- Easy assembly and provides leakproof torque free seal at tubing connections. Complete interchangeability in the field. Vibration and pressure pulses resistant. Special thread cuts and nuts silver plating ensures no galling. Low assembly torque, no torque transmitted to tubing. Higher rated fittings upto 10000 psi optional. Construction:- Constructed out of barstock material in stainless Steel as per ASTM A276 TP 304 And TP 316 construction in other alloys, carbon steel and brass optional .The Fittings are designed for tube sizes: 1/16" to 1" & 4 MM to 25 MM, outside diameter, stud sizes are 1/8" to 1"Npt, API, ISO, Parallel and ISO Taper. Application:- Fittings the most ideal for eliminating costly and hazardous leaks in Instrumentation, Onshore and Offshore, Chemical, Petrochemical, Nuclear and Process Tubing.

Pressure Gauge Syphons are used to protect pressure gauges from the steam or high temperature fluid. Pressure Gauge Syphons reduce the temperature of the process by dissipating the heat and also help in reducing the line surges fluctuations. We are based in Maharashtra and known for manufacturing, supplying and exporting Pressure Gauge Syphons. The Pressure Gauge Syphons that we offer are made of different types of materials like SS 316, SS 316L, SS 304 etc.

The Push - In One Touch Fittings series pneumatic piping joints excelling in quick fitting, accurate jointing and compact design are suited to the pneumatic systems necessary for automation and labor saving. The tube can be fitted and detached easily, so that workability is remarkably improved. Pressure loss is reduced. A large volume of compressed air can be fed with least pressure loss without air leak. Moreover the joints have a compact design. Thus the joints will satisfy strict user's demands.   Cautions on the fitting of tube -    a.Make certain that the end of the tube is cut at right angles, the tube surface is free fromflaws, and the tube is not deformed into an ellipse.   b.When fitting a tube, refer to the dimensional specification of Table 2. To prevent leaks, insertthe tube to end (c) completely.   c. On completion of fitting, make certain that the tube does not come out at your pulling.

Body Materials: SS 316, SS 316L, SS 321, Duplex2205, Titanium, Alloy 400, Alloy 625, Alloy C-276. Sizes Range from 1/16″ to 1 1/2″ and 2mm to 38mm. Precision machined components ensure perfect deformation of ferrules and tubing. Threads with smooth surface finish avoid galling and help to extend the fitting service life. Silver-Plated nuts to avoid friction against the body threads. Radius junction design with elbows provides a smooth flow path.

Being an industry leader we offer Tube Union to our customers. Manufactured using high quality raw material, these tube fittings are well known in the international market for its accurate design, high performance and sturdy construction. In addition, they are offered at reasonable rates.

We hold expertise in successfully meeting the demands of 37 Degree Flare Fittings. These can be offered by us in form of Union Fittings, Connectors, Elbow Fittings, Cross Fittings, Tee Fittings, Nuts and Sleeve Fittings and End Closure fittings. Backed by rich process knowledge, we can deliver these in exact design specifications as demanded by customers.

Syphons are used to protect instruments from high temperature & also avoids instruments directly coming in contact with process fluid , vapour, air or steam. These syphons are available in Alloy Steel or S.S with buttweld or threaded end.

The Siphon Tube is connected between the pressure gauge & process in applications where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. A gauge cock is generally connected between the pressure gauge and syphon for isolation.U Type Siphons are Suitable for Veritcal Pipe Mounting Coil Pigtail Siphons are Suitable for Horizontal Pipe Mounting

• Size: 1/4" inch to 24" inch
• Material: STAINLESS STEEL
• Type: FITTINGS ELBOW/TEE/FLANGES ETC
• Country of Origin: Made in India
• Material Grade: TP - 202/304/316/310
•  :  
• Grade: TP - 304/316

• Surface Treatment: Epoxy Polyester Powder Coating
• Body Material: Die Cast Aluminum Alloy LM6
• Power: 9-36 Watt
• IP Rating: IP65
• Length: 2-4 ft
• Voltage: 100-270 VAC
• Gas Group: I,IIA,IIB
• Wire Guard: MS

To join tubes of same dimension through a wall or panel. (Special requirements available on request)

• Brand Name: sai enterprises

We are offering ss tube fittings designed for process & instrumentation tubing's instrumentation tube fitting provide a zero leak proof seal this withstands high pressure. Vacuum, temperature & vibration tee elbow & cross fitting is manufacture from stainless steel ss. 316. Ss 304. Carbon steel (cs) teflon and brass compression nut threads are silver plated to extend the life of products.

• Feature: Durable,Rugged,Seamless finish

We are a prominent Manufacturer and Supplier of Hose Pipe Fittings. The range of Hose Pipe Fittings, offered by us, is suitable for high pressure applications assuring a leak proof seal. These Hose Pipe Fittings are known for their longer working life, cost effectiveness, easy installation, and corrosion resistant. Further, we offer Hose Pipe Fittings in suitable packaging to the clients.

A prominent supplier of huge range of Syphon. Pigtail and “U” type used on Pressure Gauges and Process Tapping to Prevent steam coming in direct contact with the Instrument. Size – ¼ to 1/2 “ in heavy thick wall Seamless tube for high pressure. End Connection – Threaded, Welded or Combination and in C.S. & St. Steel P11, P12. IBR Quality can be supplied.

Both ends are tube and the assembly is with ferruleweld nipple. The joint is made by assembly of fittings with ferrule. A weld nipple can be used instead of a ferrule when it is required to join two pipes of an equal size. Tube to tube (equal fittings) : these fittings are generally known as “stud” couplings. Tube to threads (malefemale) : during installation, when a swiwelend is needed to fit with a fixed line, a special swiwel nut is provided which can revolve around the body but will not disengage. Swiwel connections are also available. Tube to swivel : these are used for high pressure applications an provide a 360º rotation facility. These fittings are mainly used for positioning the tube fitting line. The perforated hollow shaped bolts directly on the end pass through the spherical union body for fluid transfer. Banjo fittings : used to connect fittings with instruments. Tmi has a wide range of adaptors with different threads - metric, bsp, bspt, npt. Adaptors : port reducers, closing plugs, ferrules, nuts, o rings, u rings, elastomeric rings. Tmi fittings are available in light series: 4mm-8mm, medium 6mm-42mm and heavy series:6mm-38mm depending on the pipe size. Fittings with weld nipples are available only in heavy series.

The design of Flared fittings is very efficient. The fitting incorporates the smallest seal area of all fitting types. This seal area, is only slightly larger than the fluid flow area. The Small seal area result in a compact design, low assembly torque, and a relatively high-pressure capability.

Double ferrule tube fittings is the high working pressure rating which is typically above 6000 psi. This introduces a high safety factor for the operation.

We are one of the successful manufacturers, exporters and suppliers of push in fittings in India.

• Material: SS316 or SS304 or Carbon Steel

Syphons where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. A gauge cock is generally connected between the pressure gauge and syphon for isolation.

Tube Fittings are interchangeable with other mad sub parts which has unique advantage of using "Ve-Lock" products. Tube fittings are designed as per standard norms design drawings dimensions which have 100% guarantee for its application.Tube Fittings are available in various Materials of constructions like Carbon Steel, EN1A, IS1018, IS2062 grades, Stainless steel grades 304, 316 and Brass.

Pipes of rustproof steel must be pre - assembled in hardened pre - assembly connection pieces or the correction responding devices. this can also be recommended for serial assembly using components of other materials.

hydraulics flanges

  Syphons should be used in all steam applictions.pigtail steam syphons protect the instrument from damaging effects of direct exposure to high temperature steam. To properly install and use a syphon with water and install the pressure gauge. The water will fill the lower half of the coil and will act as a protective barrier between the high temperature steam and the pressure gauge. Optional IBR approval is offered, depending upon customer requirement   Features : Syphons are available with butt weld,socket and threaded end connections.   Material : SS 304, SS 316, C.S, Monel (Seamless Pipe)   Note : All syphons are 100% factory tested prior to shipment.

high pressure tubes

We manufactures an extensive range of suction fittings for use with fire fighting vehicles. Suction hoses are used to draw water for fire fighting from an nu-pressurized supply, such as a portable water tank, pool, or other static water source, instead of drawing water from a pressurized water supply