Tube Fittings Dealers in Oshiwara, Mumbai

We manufacture following instrumentaion fittings hydraulic fittings •24 ° compression fittings  iso 8434-1 •37 ° flared fittings  iso 8434-2 •o-ring face seal fittings iso 8434-3 •24 ° cone connectors with o-ring weld-on nipples •37 ° flared hydraulic tube fittings •flareless tube fittings sae j514 •o-ring plugs sae j1926 •hydraulic pipe fittings sae j1926 •adapter union sae j516 •o-ring face seal fittings sae j1453 •automotive tube fittings sae j512  custom designed fittings tmi also manufactures custom designed fittings to suit requirement hydraulic adapters •butt weld & socket weld •o-ring straight thread per sae j1926 •o-ring face seal thread per sae j1453 •metric o-ring straight thread per iso 6149 •nptf, bsp, bspt, threads.

Tubefit tube fittings with weld ends allow you to make tube-to-weld connections. The fittings provide leak-proof seals at the tubing connections. They also eliminate costly, hazardous leaks in instrumentation and process tubing. They permit disassembly in otherwise permanently welded tubing systems.materials include 316/316l stainless steel, steel, brass and aluminium.   Note : The E dimension is the minimum opening & fittings of this group may be back drilling to lager id at pipe thread or straight thread end.   Dimension l, c, d is shown in the finger-tight position.   Dimensions are for reference only and are subject to change.

• Size: 1/8

Flare fittings Flare Tube end to Male Pipe end SAE 070102, PART NUMBER INFORMATION: FLMC - Body only, FLAMC - Assembled Fitting, ( Body, Sleeve & Nut).

Check  valves  are  used  for  controllng  flow  in  one diretion  only. Check  valves  should  never  be used  as  code  safety  relief  devices. Note : End  connections  available  in  NPT;  BSPT  ; Tube size; BSPP 100%  valve  are  factory  tested  prior to  despatch Pressure range from 1,000 to 10,000 psi. Cracking pressure 1 psi to 25 psi.

• Material: Stainless Steel
• Color: Silver
• Feature: Hard, High Strength
• Finishing: Polished
• Dimension: 3-3.5inch, 4-4.5inch
• Special Use: Free Cutting Steel
• Country of Origin: India

The Push - In One Touch Fittings series pneumatic piping joints excelling in quick fitting, accurate jointing and compact design are suited to the pneumatic systems necessary for automation and labor saving. The tube can be fitted and detached easily, so that workability is remarkably improved. Pressure loss is reduced. A large volume of compressed air can be fed with least pressure loss without air leak. Moreover the joints have a compact design. Thus the joints will satisfy strict user's demands.   Cautions on the fitting of tube -    a.Make certain that the end of the tube is cut at right angles, the tube surface is free fromflaws, and the tube is not deformed into an ellipse.   b.When fitting a tube, refer to the dimensional specification of Table 2. To prevent leaks, insertthe tube to end (c) completely.   c. On completion of fitting, make certain that the tube does not come out at your pulling.

• Country of Origin: India
• Size: 5Inch
• Type: Stainless Steel Tube Fittings
• Material: Stainless Steel

Backed with experience, we have garnered a reputation in manufacturing and supplying top-tier S. S. Tube Fittings in India. Durability and strength are inbuilt in our Stainless Steel Tube Fittings because of which they are excessively demanded in various household and industrial applications.  Avail them from us in different specification at cost-effective prices. We are well-equipped to make prompt shipments of even bulk orders.Details : Male Connector (PMC) Union (PU) Male Pipe Weld Connector (PPWC) Bulk head Union (PBU) Male Elbow (PME) Union Tee (PUT) Male Adapter (PMA) Union Cross (PUC) Bulkhead Male Connector (PBMC) Reducing Union (PRU) Male Run Tee (PMRT) Elbow Union (PEU) Male Branch Tee (PMBT) Reducer (PR) Female Adapter (PFA) Bulkhead Reducer (PBR) Female Connector (PFC) Tube Cap (PTC) Bulkhead Female Connector (PBFC) Tube Plug (PTP) Female Elbow (PFE) Nut (PN) Female Run Tee (PFRT) Back Ferrule (PBF) Female Branch Tee (PFBT) Front Ferrule (PFF)

The inside diameter of the hoses must be adequate to keep pressure loss to a minimum and avoid damage to the hose arising as a result of heat generation or excessive turbulence. Hoses outside diameter can be a critical factor when hoses roufing clamps are used or hoses are routed through bulkhead, check individual hose specification table for O.D.'S.Both fluid and ambient temperature must be considered while selecting a replacement assembly. The hoses selected must be capable to withstand minimum and maximum temperature of system. While selecting a hoses for its maximum temperature care should taken that temperature stated is not an intermittent value.Most often only a duplicate of the original hose will have to be made. Make sure all the requirements of the application are fulfilled. While selecting hoses, its application should be considered i. e. Static Moving Flexing. Various application may require different hoses constructions. For construction please check individual hose specifications.

• Feature: Rust Proof, High Strength

Double Ferrule Compression Tube Fittings consist of four precision components such as Body, Front-Ferrule, Back-Ferrule and Nut. These components are manufactured to a very precise dimensional tolerances to provide Zero leak, torque free seal at all tubing connections to withstand the high performance demands such as high pressure, vacuum, vibration, impulse and temperature.

• Material: Metal
• Condition: New
• Finishing: Polished
• Feature: Excellent Quality, Fine Finishing, High Strength, Perfect Shape
• Resistivity: Corrosion & Chemical resistant
• Performance: Optimum
• Durability: Long Life

We are also manufacturing hose fittings and providing complete solution to the clients.

• Size: Other
• Type: Other
• Material: Other
• Shape: Other
• Application: Other
• Color: Other
• Pattern: Other
• Finishing: Other
• Condition: Other
• Technics: Other
• Steel Grade: Other
• Country of Origin: India

Pressure Gauge Syphons are used to protect pressure gauges from the steam or high temperature fluid. Pressure Gauge Syphons reduce the temperature of the process by dissipating the heat and also help in reducing the line surges fluctuations. We are based in Maharashtra and known for manufacturing, supplying and exporting Pressure Gauge Syphons. The Pressure Gauge Syphons that we offer are made of different types of materials like SS 316, SS 316L, SS 304 etc.

Pneumatic tubes or ‘push to connect fittings,’ as they are more commonly known, are used primarily for pneumatic systems for the following reasons:Positive Retention: The fittings are manufactured in such a way that tugging on the lines only causes the fittings to grip harder, which in turn lowers the chance of an air leak.

Being an industry leader we offer Tube Union to our customers. Manufactured using high quality raw material, these tube fittings are well known in the international market for its accurate design, high performance and sturdy construction. In addition, they are offered at reasonable rates.

We are offering Low and high pressure. Straight and bend fittings with single double ferrules. available in all grades of stainless steel, brass, PTFE. Sizes: 18" to 1 12".

Rubber elbow, Alloy Steel Elbow, Pvc pipe elbow, Steel pipe elbow

To connect tubes of same dimension in a straight configuration. (Special requirements available on request)

We are considered as one of the most prominent Industrial Tube Fittings Manufacturers and Exporters in the global market. Our huge assortment of Stainless Steel Tube Fittings includes Moisture Filter E2e 1o Inch, Moisture Filter 8 Inch, Toggle G OD Niddle Valve 1 OD, Niddle Valve (14) OD, Ball Valve (18) OD, Manifold For 6 Fold For Nitrogen, High Purity Two Stage Regulator, and many more. The above-mentioned fittings are available in industry-specific designs with various specifications. Our Elbow Tube Fittings are high on demand in national as well as international markets. They consist of several features such high strength, durability, consistent performance, and many more.

A prominent supplier of huge range of Syphon. Pigtail and “U” type used on Pressure Gauges and Process Tapping to Prevent steam coming in direct contact with the Instrument. Size – ¼ to 1/2 “ in heavy thick wall Seamless tube for high pressure. End Connection – Threaded, Welded or Combination and in C.S. & St. Steel P11, P12. IBR Quality can be supplied.

The Siphon Tube is connected between the pressure gauge & process in applications where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. A gauge cock is generally connected between the pressure gauge and syphon for isolation.

• Size: 1/4" inch to 24" inch
• Material: STAINLESS STEEL
• Type: FITTINGS ELBOW/TEE/FLANGES ETC
• Country of Origin: Made in India
• Material Grade: TP - 202/304/316/310
•  :  
• Grade: TP - 304/316

We offer customers a wide range of precision engineered Double Ferrule Compression Tube Fittings. These include Connectors, Union Fittings, Elbow Fittings, Tee Fittings, Cross Fittings, End Closure fittings and Nuts and Sleeve Fittings. Our expertise lies in offering these in both standard and customized specifications.

Syphons are used to protect instruments from high temperature & also avoids instruments directly coming in contact with process fluid , vapour, air or steam. These syphons are available in Alloy Steel or S.S with buttweld or threaded end.

We are a prominent Manufacturer and Supplier of Hose Pipe Fittings. The range of Hose Pipe Fittings, offered by us, is suitable for high pressure applications assuring a leak proof seal. These Hose Pipe Fittings are known for their longer working life, cost effectiveness, easy installation, and corrosion resistant. Further, we offer Hose Pipe Fittings in suitable packaging to the clients.

We are the well reputed manufacturer and supplier of Industrial Tube Fittings, which are made from optimum quality steel. Our wide range of Industrial Tube Fittings is used for instrumentation, process control, pneumatic and hydraulic in varied industries. The Industrial Tube Fittings are well tested before they reach to the buyer. Our Industrial Tube Fittings can be accessed at affordable prices. Kinds of industrial tubes : Single (Parker Type) Double Ferrule Tube Fittings (Swagelok Type) Known For : Long life Corrosion resistive Reliable Dimensionally accurate High ductility Applied In : Process control Instrumentation Chemicals Petrochemicals Fertilizers Offshore Power Plants Automobile Specifications : The standard sizes range from 3m to 25mm, 1/8" to 1" with variety of end connections according to BSP, NPT, BSPT, METRIC, UNF, or any other thread standard.

• Brand Name: sai enterprises

We are offering ss tube fittings designed for process & instrumentation tubing's instrumentation tube fitting provide a zero leak proof seal this withstands high pressure. Vacuum, temperature & vibration tee elbow & cross fitting is manufacture from stainless steel ss. 316. Ss 304. Carbon steel (cs) teflon and brass compression nut threads are silver plated to extend the life of products.

Body Materials: SS 316, SS 316L, SS 321, Duplex2205, Titanium, Alloy 400, Alloy 625, Alloy C-276. Sizes Range from 1/16″ to 1 1/2″ and 2mm to 38mm. Precision machined components ensure perfect deformation of ferrules and tubing. Threads with smooth surface finish avoid galling and help to extend the fitting service life. Silver-Plated nuts to avoid friction against the body threads. Radius junction design with elbows provides a smooth flow path.

The Siphon Tube is connected between the pressure gauge & process in applications where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. Agauge cock is generally connected between the pressure gauge and syphon for isolation.   Features   4 Available in U type and Pigtial / Coil Type 4 Material SS316 or SS304 or C.S. 4 1/4", 3/8”, ½” bsp or npt connection  

Our tube fitting are designed for process & instrumentaion tubings.Tube fitting have been designed and manufactured with continuous research and development backing to very precised tolerances under rigid quality control. Quality test are carried such a high pressure,impulse,vibration,vaccum,temperature,pull out and burst pressure,so that maximum safety and reliability is ensured from tube fittings.