Tube Heaters Dealers in Mumbai

Infrared Tube Heaters Various types of heaters like Cartridge Heaters (Low watt & High watt density of various sizes), Ceramic Infrared Heaters (Elstein brand- Germany) and Short-wave infrared heaters.

Our Twin Tube MW IR Heater is made up of 8-shape high-purity clear quartz twin tube, with each tube having Ni-Chrome heating coil that runs in U Shape in the tube. Features Heating up and cooling down time is approximately 50 secs. Available with gold reflector and without reflector. The outer rear side of the tube of the reflector has the gold coating. Heat loss from backside is prevented by the reflector, thereby power is saved. Results in making surrounding work area cooler. Increases the efficiency and directionality of the heater. Specifications: Standard sizes (in cross section): 11 mm x 23 mm & 15 mm x 32 mm. Maximum length: 200 mm. Power density: 60 KW / m2 can be achieved. Paint Baking

• Type: Evacuated
• Certification: CE Certified
• Warranty: 1 Year
• Weight: 10-100kg
• Application: Water Heating
• Automatic Grade: Automatic
• Housing Material: Metal

Buy high performance, easy to install and low maintenance Evacuated Tube Collector Solar Water Heater (500 LPD) from us at competitive prices. Reckoned for its user-friendliness, high output and low power consumption, our Evacuated Tube Collector Solar Water Heater (500 LPD) is of unmatched standards. We can provide the customized version of the model as well.

QUARTZ GLASS The quartz glass is very pure and provides good transmission and temperature resistance TWIN TUBE The unique twin tube design offers high radiation power and very good mechanical stability allowing emitters of lengths up to 3.5 meters. Emitters are available in Short Wove, Medium Wave, or Long Wave versions. That gives you the possibili-ty to select the optimum wavelength for the material to bo hooted. Dimensions and filaments are matched to requirements. GOLD/ WHITE COATED Twin Tube Infrared Heater is made by virtue of a gold & white coated which con emit heat directly to the product. A coat-ing on the infrared emitters reflects the infrared radiation. Consequently the infrared radiation impinging on the product is virtually doubled. FEATURES Infrared heaters can be matched to material characteristics - following higher process speeds and less energy consumption Directed heat only where needed Infrared ovens needs less space Non contact or medium needed Short response times of infrared heaters for switch on / switch off

• Material: Glass
• Country of Origin: Indian
• Warranty: Na

he installation of the Radiant Modules consists of a patented heat generator, a single or double-pipe radiant circuit and a thermoregulation digital device. The radiant circuit is a closed ring having go and return tubes working in vacuum condition. The gas or gas-oil burner produces a carrying fluid (a mixture of air and burned gases) which circulates at high speed inside the tubes of the radiant circuit. The tubes reach a superficial temperature from 100°C to 300°C (according to the requirements) producing the radiant energy necessary to provide the required environmental comfort. The pipes are in aluminized steel, treated with special silicone paint and insulated with fiberglass panels on three sides. The radiant circuits are pre-assembled and tested in our factory; their installation on site turns out to be very easy also thanks to their flanged joints.   KEY BENEFITS   COMBUSTION EFFICIENCY up to 95% or 107% in models equipped with condensing unit*. ECOMIX BURNER air-stream gas burner with VENTURI tubes working in constant proportional modulation. ECOSAVING DEVICE that controls the chimney lock-gate and allows to keep optimal combustion efficiency at any power level**. PRE-ASSEMBLED MODULES They are produced and assembled in our factory to make the installation job easier and quicker***. THERMAL POWER up to 300kW and circuit lenght up to 160m. DIGITAL THERMAL CONTROL allows you to operate the system from remote stations and get remote assistance service (optional). MINIMUM MAINTENANCE through the reliability of all components and exacting tests complying with European standards both in the assembly line and in the in-house laboratory. All this ensures high reliability and long-term safety. OTHER ADVANTAGES   NO AIR STRATIFICATION or rather no warm air shall accumulate in the high areas of the room being heated; on the contrary, as far as the air goes upwards, the air temperature itself decreases. EXCELLENT THERMAL EMISSION generated by the large radiating surface with high emissivity. HEALTHIER AND CLEANER AIR There are no convective motions and consequent raise of dust, keeping the air healthy and clean. COMFORT TO CURRENT STANDARDS Our long experience stretching back over thirty years of activity, added to our participation in work groups specifying standards for products, make Fraccaro an ideal partner in this specific sector of heating technology. EASY, RAPID INSTALLATION thanks to an easy assembling procedure and installation on the ceiling with chains. NO FLOOR OR WALL SPACE IS REQUIRED as our GIRAD Radiant modules are installed on the ceiling. NO DANGER OF FROST as the lack of carrying fluids, such as hot water or steam, makes it possible to shut down the system for long periods without any unfortunate consequences. UNIFORMITY OF TEMPERATURE the heat produced through radiation by our Radiant Modules creates uniform temperature horizontally through the building, better than with any type of traditional heating. HIGHLY ECOLOGICAL as it allows for fuel saving, with great combustion performance and very low emissions of pollutants. MODULAR DESIGN i.e. for large surfaces more than one units are to be installed. MODULATING OPERATION of generators, so as to control the radiating heat emission according to the external temperature. NO AIR STRATIFICATION or rather no warm air shall accumulate in the high areas of the room being heated; on the contrary, as far as the air goes upwards, the air temperature itself decreases. RAPID WARM-UP due to lack of intermediate fluids requiring heating. CONFORM TO CURRENT STANDARDS Our long experience stretching back over thirty years of activity, added to our participation in work groups specifying standards for products, make Fraccaro an ideal partner in this specific sector of heating technology.   PRE-ASSEMBLED MODULES The radiant module is realized with a supporting frame in zinc-coated steel. The frame supports one or two pipes in aluminized steel treated with silicone paint and having insulating fiberglass panels on three sides. The pre-assembled modules in 1.5, 3 and 6-meter length allow a very flexible application of the circuits whose length and shape can vary according to the requirements of the building to be heated. They are produced and pre-assembled in our factory to make the installation job easier and quicker. Thanks to the special chain connection to the supporting frame, the pipes are free to move while heating or cooling assuring a very long lasting to our modules.   MODULE CONNECTION   The flanged cone-shape joints ensure perfect pipe tightness; during the installation they avoid problems coming from the traditional connections with silicone, gaskets or other adhesive components. The bayonet joint of the radiant modules ensure the perfect tightness of the radiant circuit.  

IR wavelength between short wave and medium wave Response time around 1 ~2 seconds Average working life 7000 hours Gold or ceramic coating at rear side as a reflectors Dimensions 15x33mm Max. overall length up to 4M Vertical and horizontal emitters are available

• quartz tube: 180°.

Gold plating is done on quartz tube over 180°. These heaters reflect the radiant energy through the opening area only, improving element efficiency by as much as 20% compare to without gold plating heater. Energy cost savings are realized. Reflectors are often not needed. Surrounding work area tempratures are cooler. These heaters are also available with a without gold plating.

Our Twin Tube MW IR Heater is made up of 8-shape high-purity clear quartz twin tube, with each tube having Ni-Chrome heating coil that runs in U Shape in the tube.Heating up and cooling down time is approximately 50 secs.

u tube heaters, high density cartridges heaters

Electric Furnace Radiant Electric Tube Heater

tube heaters, industrial immersion heater, diesel glow plugs, heater parts

Quartz Tube Heater, Plastic Coated U Bolt, Aerospace Bolts

Water Immersion Tube Heaters, SS Cover Band Heaters

tube heaters, Tubular Heaters, circulation heaters, U Type Heaters

Silica Glass Tube Heaters, Door Heater, electric immersion heater

twin tube medium wave infrared heater, Coil Heater, Ceramic Band Heater

Silica Tube Heater, Sulthises Crucible, Copper Melting Induction Furnace

Tube Heater, Cartridge Heating Element, air duct heaters