Tubular Heaters Dealers in Mumbai

Tubular (sealed element) is a fine coil of Nickel chrome wire in an insulating binder (MgO, alumina powder), sealed inside a tube made of stainless steel or brass. These can be a straight rods (as in toaster ovens) or curved to fit in a smaller space (such as in electric stoves, ovens, and coffee makers).   Tubular heaters during recent years are widely accepted as a mode of heating due to their flexibility with which these can be formed into any shapes and sizes depending on the applications. Due to their versatility, flexibility and relative insensitivity to mechanical damage, the tubular heaters have often provided ideal solution to difficult problems encountered in heating.   Our range of tubular heaters are designed and manufactured with state-of-the-art technology which are very compact in construction, easy and economical in operation and consume less electricity. We offer tubular heaters that are practically hassle-free and maintenance free. Our tubular heaters are known for their reliability, durability and higher efficiency. We ensure that our tubular heaters are manufactured for optimum performance. Our tubular heaters are manufactured using best quality raw materials. We offer these tubular heaters at very economical industrial prices. We also customize these tubular heaters as per our clients' requirements and specifications

• Driven Type: Electric

Micro tubular coil heaters are manufactured in round and rectangle cross sections, in round section available diameters are 1.5mm, 1.8mm. In rectangle cross section size is 1.3mm x 2.1mm. These heaters are swaged and compacted to these diameters and fitted into special clamps to tighten over circular parts for heating purpose. Features Flexible cold leads of 5’’ & 7’’ Round cross section of 1.5mm and 1.8mm Rectangle cross section of 1.3mm x 2.1mm Standard stock sizes available Application Pet perform moulds Hot runner nozzles Thin wall containers

Versatile in shape & loading. Sheath material suitable to the application and temperature for variety of heating application. SINGLE ENDED TUBULAR HEATER S Single Ended Tubular Heating Elements are of similar construction as our standard tubular elements. They terminate at one end which can simplify wiring and installation. These are most commonly used in moulds and other heat transferring metal parts as well as open air applications and immersion applications. Tubular Heaters are available in a variety of sheath materials with temperature capabilities up to 870°C SPECIALTY SHAPES TUBULAR HEATER Specialty Shaped Tubular Heating Elements are of similar construction to our standard tubular elements. These shapes can greatly increase rigidity to the element. Heaters that are clamped to a surface have greater surface contact allowing for greater heat conductivity. Tubular Heaters are available in a variety of sheath materials with temperature capabilities up to 870°C

We are offering micro tubular coil heaters are designed and manufactured with 40 years of experience, for superior performance and life expectancy. Depending upon applications, these heaters provides the best combination of physical strength, high emissivity and good thermal conductivity to heat hot runner bushing nozzles mainly for multi cavity hot runner pet perform moulds and thin wall container moulds. axial clamp the 1.8 mm diameter micro tubular heater is formed into a coil of predefined dimension and equipped with a special cover for easy fitment. This special cover called axial clamp allows front end loading and adjustability. Such easy handling saves hours of downtime in case of heater failure in a multi - cavity mold. These heaters are offered with staggered cold leads of 5" and 7". applications: 1. pet preformed moulds 2. hot runner nozzles & bushings 3. thin walled container moulds features: 1. ce certified. 2. standard size available id 19mm x 30 & id 22mm x 30 3. faster heat transfer with flat cross section tube (1.40mm x 2.20mm) 4. two standard diameters, 1.5 mm and 1.8mm (0.059" & 0.07") 5. standard wattage available 149 watt & 268 watt on 240 volt 6. staggered cold leads of 5" and 7" 7. robust construction in micro tube dia - 1.50 & 1.80mm 8. equipped with a special cover for easy fitment over circular parts. 9. axial clamp - front end loading adjusting saves hours of downtime in moulds.

We offer tubular heaters. Tubular heating elements from heaters controls & sensors. Formed tubular heating elements provide an economical, robust, and versatile heat source. Tubular heating elements are commonly used to fit into milled grooves for hot runner molding systems. The precision fit optimizes heat transfer to the working surface. Manstronics⮠can provide formed tubular heating elements�ready to go� into your existing channel or new tool design. Tubular heating elements are made of incolloy and can be bent into all shapes and sizes. The following diagrams provide various formations that are possible, kindly chose the formation you require.

Micro coil heaters also known as high performance micro tubular heaters or cable heaters. The basic construction of these heaters consist of compacted MGO, high temperature resistance wire and stainless steel Incoloy tube. These heaters can be constructed with or without built in thermocouples. They are usually installed where space available for heating is limited and are widely used on Hot Runner Nozzles, Manifolds, Die Cast Nozzles, packaging machines etc. | BUY

• Voltage: 220 V
• Material: Stainless Steel, Titanium
• Power: 1 - 5 kW
• Application: Industrial, Commercial
• Packaging Type: Boxes
• Features: Application specific design, Smooth performance, Low maintenance cost
• Item Code: TH-101
• Heater Material: SS

• Type: Tubular Heaters
• Material: Aluminium, Copper, Metal, Tungsten
• Certification: CE Certified, ISO 9001:2008
• Color: Brown, Grey, Sliver
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Manual
• Warranty: 1year, 2years
• Driven Type: Electric

• Type: Tubular Heaters
• Material: Aluminium, Copper, Metal, Tungsten
• Certification: CE Certified, ISO 9001:2008
• Color: Brown, Grey, LIght White, Pink
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Manual
• Warranty: 1year, 2years
• Driven Type: Electric

• Power: Electric
• Voltage: 240V
• Country of Origin: Made in India
• Color: Silver
• Material: Stainless Steel
• Diameter: 8mm
• Brand: Aditya Agency
• I Deal In: New Only
• Is It Portable: Non Portable

We are offering strip tubular black heater. Strip tubular black heater is better alternate to conventional u shape air heater where higher wattage is required in a short span of length. It is made from chrome nickel steel tube covered in a m.s zinc plated channel. It can be used horizontally or vertically with an input supply of single phase or three phase. Two brackets are provided for mounting. It is generally used where black heat is required. Uses: - for heating ovens, air dryers, paper mills etc

Tubular (sealed element) is a fine coil of Nickel chrome wire in an insulating binder (MgO, alumina powder), sealed inside a tube made of stainless steel or brass. These can be a straight rods (as in toaster ovens) or curved to fit in a smaller space (such as in electric stoves, ovens, and coffee makers). Tubular heaters during recent years are widely accepted as a mode of heating due to their flexibility with which these can be formed into any shapes and sizes depending on the applications. Due to their versatility, flexibility and relative insensitivity to mechanical damage, the tubular heaters have often provided ideal solution to difficult problems encountered in heating.

It is ideal for transferring heat to air or other gases. Finned tubular heaters are manufactured in a very wide range of dimension and power ratings. They can be shaped into any pattern, depending on the application. Complete air heating batteries that incorporate finned tubular heaters are designed and built to meet the requirements. Water & Oil Immersion Heater Efficient, compact heating units designed to provide bulk heat flow system processing fluids or for liquid accumulators. Normal and certified hazardous area constructions very widely used to heat water, oil, gases or for heat transfers. We can supply standard as well as custom built purposes. Available in both round and square flange with built in probe and thermostats on request. Alkaline / Titanium Heater Made by nickel chrome sheeted heating elements, mounting one side of the vessel, easy to remove and clean. It is used in Alkaline cleaning solution, detergent and other alkaline solution normally corrosive to mild up to 90 deg C.

• Type: Tubular Heaters
• Material: Aluminium, Copper, Metal, Tungsten
• Certification: CE Certified, ISO 9001:2008
• Color: Grey,Sliver
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Manual
• Warranty: 1year, 2years
• Driven Type: Electric

We present industry̢۪s finest Tubular Heater. Our Tubular Heating elements are the most versatile and the best suited solution to a large number of applications. Our Tubular Heater are factory-configured to almost any shape or size. Custom bending diameters can be made upon request. Typically made using steel, stainless steel, Incoloy, inconel or titanium alloys, our Tubular Heaters are often regarded as the foundation of all heating elements. These heating elements have a strong outer sheath to help protect the heater from physical stress and uses high quality alloys to allow efficient heat transfer from resistance coil to your heating medium. Depending on their rating, sheath and shape, tubular elements are used in a variety of heat applications (conduction, convection, radiation heating) that require process temperatures of up to 750oC to heat liquids, gases and solids. A variety of diameters are available to help adjust watt densities in your application to design these electric heaters for best performance and long life. Using high quality magnesium oxide powder to allow for efficient heat transfer from resistive coil (Nichrome) to your heating medium whether it is air, liquid or solid. Bending radiuses are designed with careful expertise to allow for optimal performance when meeting "form fit and function" within your application. Selection in Tubular Heaters Straight & Formed tubular heatersFinned type tubular heatersU-shape & M-shape tubular heatersFlanged tubular heaters for water, oil, air, gases etcTubular heaters with bulk headTubular heaters for manifolds Dimensional Specifications Diameter Tolerance : +_0.1 mmOver 10" +_2% of Sheath lengthMinimum Length : 250 mmTubular Heater with Flanged or Bulk Head fittingsLength Tolerance : upto10" long +_2 mm

We are a notable Manufacturer and Supplier of compact and precision made Tubular Heaters. A heater bank is formed by Tubular Heaters, with or without heat dissipation fins, and mounted on rectangular plate. The Tubular Heaters are in extensive demand owing to their diverse applications. Avail Wholesale Tubular Heaters from us at very reasonable prices. Application RailwaysRe-generative braking Load registers in battery Nuclear & thermal power plants Testing generators loading during peak off period, etc.

We specialize in the manufacture of high quality Immersion Heater.The Immersion Heater are specifically designed to heat different kinds of liquids. Made using high grade Stainless Steel,Copper and Incoloy pipes.These heaters are brazed to threaded flanges or nipples for immersion purpose.

These heaters are swaged and compacted to these diameters and fitted into special clamps to tighten over circular parts for heating purpose. Micro Tubular Coil Heater?s Hermetically sealed construction prevents moisture from entering the better results for long life.

Uses : Are the most versatile & widely used source of electric heating for industrial, commercial & scientific application. These are used in force air heating, thermal forming M/C, direct immersion in liquids, comfort radiant heaters, welded brazed or clamped to tanks & pipes hot runner molds, radiant & convection heater for ovens & dryers.Construction : Tubular heaters are swaged construction provides maximum support to resistance wire.They can be designed in a wide range of electrical ratings, diameters, length, terminations & sheath material. Important & useful characteristic of tubular heaters are that they can be formed in to virtually any shape, brazed or welded to any metal surface and cast in to metals.Resistance wire is fusion welded to the steel terminal cold pins. These coils assembly is precisely stretched & centered in the element metal sheath which is than filled with grade 'A' magnesium oxide powder (Mgo). Swaged to reduced diameter into solid mass, permanently stabilizing the coil in center while providing excellent heat transfer & dielectric strength between the coil & the sheath.Working Temperature : For temperature upto 200°C can be used any of the heaters, in the range depending upon the space available. Air heater for higher temperature can be designed on request. Sheath material are as Inconal :- 800°C; ss 304; 321; 316; upto 600°C; copper:- 177°C Mild Steel:- 350°CWhile Placing Order : Please mention diameter, length, wattage, voltage, lead wire length, special features if any.