Ultrasonic Testing Machines Dealers in Mumbai

• Material: Plastic
• Frequency: 40 - 50 Hz
• Weight: 1 Kg
• Display Type: Digital
• Battery: 3000 MAH

• Time Base: 10MHz Quartz.
• Time Measurement Ranges: 000.0 to 999.9 microseconds & 0000 to 9999 microseconds.
• Display Type: 4 digit 7 segment Liquid Crystal Display.

CUTE 102A is a portable apparatus for Non-Destructive evaluation of concrete quality by Ultrasonic Pulse Velocity (UPV) measurement method. It is used to measure the transmission time of ultrasonic pulses in the test specimen, from which the velocity can be computed. A set of UPV readings can be used for further interpretations of structural concrete. The equipment is designed to comply with the recommendations of BS 1881 (Parts 210 & 203), ASTM C 597-71 (Reapproved 1979) and IS-13311 (Part I); 1992.The Instrument generate pulse of ultrasonic frequency, which are coupled into the concrete specimen under test by the transmitting transducer. The receiving transducer is used to detect these pulses & to convert them back into electrical pulses. Suitable coupling media are used to minimize the losses due to acoustic mismatch at the transducer-specimen interfaces. A 10MHz Quartz time base ensures accurate measurement of pulse transit time (T) with a resolution of 0.1 microsecond. The path Length (L) can be measured with a tape & hence the Ultrasonic Pulse Velocity (UPV) in the specimen under test can be computed as, V = LT The CUTE 102A is a fully portable model with facility for using 12 V DC as well as 230 V AC supply. A liquid crystal display (LCD) provided on the front panel ensures good readability during outdoor use. The equipment is applicable for estimation of properties of concrete such as strength, uniformity, crack depths, etc.

• Dimensions:: 240x120x75 mm approx.
• Weight Approx.: : 0.5 kg

To measure the velocity of propagation of ultrasonic pulses through concrete. • Microprocessor incorporated • Frequency range: 24 to 150 kHz • Receive input impedance: 1 MΩ • RS 232 output • Connectable to oscilloscope • Transit time measurement: 0 to 1999.9 µs • Pulse rate: from 1 to 10 per second, selectable • Resolution: 0.1 µs • Transmitter output: 800 V • Battery operated

• Type: Ultrasonic Testing Machines
• Application: Extrude PTFE Tube, Industrial
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Driven Type: Electric, Hydraulic, Mechanical
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Power: 1-3kw, 3-6kw, 6-9kw
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Output: 100-200kg/hr, 200-300kg/hr

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material. The time is displayed on screen. The time of flight and the velocity of sound in the material are correlated to estimate the mechanical strength of concrete.Applications• Non destructive strength measurement of in situ or precast concrete.• Crack & Void detection.• Determination of Homogeneity of concrete.• Elastic property measurement of concrete.• Infrastructure Checking.• Construction Testing.• For Research Purpose.• For Students Practical(Civil/Mechanical Engineering Colleges).• To Test Wood,Rocks and similar materials using suitable probes.• To Check Railway Path.• Old Building Strength Check.Features• Compliant with International Standard BS-4408 (Part V – 1974) and ASTM C-597.• Light weight, easy to operate.• Range up to 5 meters using suitable probe.• Fast, Reliable results.• Computer compatible.Additional features for 4600M • LCD display.• Direct velocity measurement.• RS-232 output.• Memory for calibration & measurement data.• Curve fitting for mechanical parameters Vs Velocity Correlation. Additional features for 4600G • Large Graphic LCD display.• Bidirectional data transfer with PC.• Elastic Mode for elastic constant measurement with special probes.• All other features of 4600 M.

Avail from us, the wide range of Ultrasonic Concrete Tester, which is fully portable. We are known as the chief Manufacturer and Supplier of the cutting edge Ultrasonic Concrete Tester. Our Ultrasonic Concrete Tester generates pulses in low frequency and measures the time, which is displayed on screen of the flight in the material. Applications Determination of Homogeneity of concreteCrack & Void detectionElastic property measurement of concreteInfrastructure CheckingTo Test Cracks in WoodTo Check Railway PathFor Checking Concrete StrengthFor Practical & Research PurposeFor Students PracticalOld Building Strength CheckConstruction Testing Features Compliant with BS-4408 (Part V – 1974) and ASTM C-597 standardsRange up to 5 meters using suitable probeFast, Reliable resultsComputer compatible

The SB100 is a hand-held battery-operated rechargeable ultrasonic tester designed to bump test General Monitors ultrasonic gas leak detectors. The SB100 is useful for quick tests where physical access to the ultrasonic gas detector can be difficult. The unit can be used to bump test up to 18 meters away from the detector in Class 1, Div 1&2 hazardous areas.   Can be used up to 18 meters from ultrasonic gas detector without requiring hot work permits One button operation 5 hour battery life Includes carrying case and shoulder strap

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material.

Capable to detect transverse defects in rail head including Gauge Face Corner Defects & field side defects & horizontal defects of head, web & foot web junction in both rails in single run of testing. Measure the distance of flaw location in track as well as flaw location in rail. Storage capacity for 200 ‘A’ Scan flaw patterns and 100 cal sets. Special facility to display, freeze & store vertical & horizontal movement of flaw signal of angel probe. Special facility to display sensitivity setting flaw signal over actual flaw signal simultaneously as and when required. Colour signal display. Facility to obtain printout of stored data & transfer to PC. Facility to label and store data. Light weight, robust, sturdy & portable.

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material. The time is displayed on screen. The time of flight and the velocity of sound in the material are correlated to estimate the mechanical strength of concrete.

ultrasonic testing machine, Non destructive testing Equipment

ultrasonic hardness tester, Hot Melt Dispenser, Hot Melt Adhesive

Digital Ultrasonic Single Rail Tester, Portable Generator, AT Welding

MGW Ultrasonic Thickness Tester, Range 1.0 - 200 mm, UTG 3941