Uni-therm Boilers Pvt Ltd Naigaon East, Mumbai, Maharashtra

UNITHERM'S solid fuel fired air heating system is designed specifically with large Industrial drying in mind. It's superior design, efficient performance and high fuel economy makes it a better buy than any other heater of its kind to achieve much lower drying costs than standard conventional ovens. The unit is easy to install, simple to maintain and highly economical to operate. The design is suitable for a maximum temperature of clean hot air at 170 Deg C.   Highly suitable for Tray Driers, FBDs,Spin Flash Driers & other machinery in Chemical units, Dal mills & rice mills for paddy drying

Brand Name : UNI-THERM

Usage : CHEMICAL INDUSTRY, PHARMA, DAL MILLS, RICE MILLS

ibr approved small capacity boilers  100 kgs/hr to 800 kgs/hr multifuel - coal/wood/briquette fired pressure 100 psig -7 kg/cm2 ideal for small & medium industries  both vertical & horizontal designs available high efficiency lower investment compared to ibr boilers easy maintenance quick after sales service over 1000 installations.

high efficiency thermic fluid heaters capacity 1 lac to 80 lac kcal/hr with highly efficient riello - italy burner.  3 pass design, highest efficiency..

Brand Name : UNI-THERM

Fuel : LDO,FO, LPG, NAT GAS

After-Sales Service Provided : PROMPTLY

Non IBR Design CAPACITIES - 100 KGS/HR TO 1250 KGS/HR Available in all the fuel options like LDO, FO, LPG, Natural Gas & also with dual fuel Burner with a simple changeover switch.Highly efficient indigenous as well as imported Burner options available. A special, anti drip design, high efficiency, imported burner of Riello (Italy) make with low noise blower and fuel oil pump ensure almost smokeless and silent operation and reduces the downtime and maintenance problems greatly. Due to it's unique design & efficient mixing of air & fuel, the combustion efficiency & hence the efficiency of the Boiler is also increased. The connected load is also much lower compared to any indigenous burner resulting in sizeable power savings.

Type : COIL TYPE, FORCED CIRCULATION ,4 PASS, NON IBR

The UNI-THERM'sNn IBR Boilers are manufactured as per latest engineering standards. The Unitherm NON IBR Boilers comprise of machine wound, specially designed helical coil placed inside a sturdy M.S. double jacketed shell. The system comprises of three passes of the flue gases in the Boiler & the non-pressurised heat recovery unit with heat optimiser constitutes the fourth pass, maximizing the efficiency. Design available in all the fuel options & also with dual fuel Burner with a simple changeover switch.Highly efficient indigenous as well as imported Burner options available.

highly efficient, horizontal as well as vertical design. Capacities ranging from 50000 kcal/hr to 50,00,000 kcal/hr. temperatures available upto 90 deg c in non pressurisd design & 140 deg c in pressurised design suitable customised models availble for swimming pool heating also  highly suitable for dairies & milk products plants, hotels, hospitals, laundries & many other industries prompt after sales service & spares available supplied with riello - italy or indian burner as option    

HAG SERIES Oil LPGNatural gas fired – 50,000 to 60,00,000 Kcalhr UNITHERM'S LPG/NATURAL GAS fired air heating system is designed specifically with large Industrial drying in mind. It's superior design, efficient performance and high fuel economy makes it a better buy than any other heater of its kind to achieve much lower drying costs than standard conventional ovens. The unit is easy to install, simple to maintain and highly economical to operate. The design is suitable for a maximum temperature of clean hot air at 300 dEG C IN INDIRECT Fired Design & 800 Deg C in Direct fired Units

This design gives highest efficiency ever. The Thermic fluid heater is of VERTICAL construction with Two concentric large diameter helical coil & shell assembly, placed directly on top of the combustion furnace. This ensures that the intense luminous heat of the flame is fully utilized. This is the first, Radiative section comprising of the first 3 passes of hot flue gases.   These gases from radiant coil are then made to pass through a second, convective heat exchanger. This is again made of twin concentric helical coils, placed inside a sturdy M.S. shell having two more distinct passes of hot gases, making the total passes of Flue gases inside the TFH to FIVE. Thus maximum amount of heat is extracted from the flue gases. The gases are then made to pass through the Air prehater & Mechanical dust collector, on way to the chimney through I.D.Fan. A generously designed refractory lined external furnace is provided to ensure high furnace volume and grate area and can ensure rated output on low-grade coal and can easily burn most other fuels such as Lignite, Paddy husk, Fire wood, Bagasse, etc, without any modifications.   The Safety controls and instrumentations provided ensure completely safe operation and provide Audio Visual Alarm and cuts off the combustion in case of abnormal operating Conditions.

unique design boiler an electrode steam generators differs in principle from any other method of generating heat to produce steam.  the heat in this boiler is generated by the resistance offered by water to the passage of electricity. Thus, unlike, other equipments, the heat is generated within the water itself and hot transmitted to it from outside source at a higher temperature. The heat generated is exactly equal to electricity expended, thus there is no loss of energy in the conversion. standard pressures -100 psi & 150 psi capacities - 20 kgs/hr to 200 kgs/hr in non ibr design 200 to 500 kgs/hr in small industrial boilers- ibr design   highly suitable for  laboratories, ghee plants, universities, hotels, hostels, hospitals, laundries, etc                 

Type : electric electrode boiler

Brand Name : UNI-THERM

Output : 20 to 200 kgs/hr

this highly efficient thermic fluid heater is of vertical construction with a large diameter helical coil placed directly on top of the combustion furnace. This ensures that the intense luminous heat of the flame is fully utilized. This is the first, radiative section comprising of the first pass of hot flue gases.   these gases from radiant coil are then made to pass through a second, convective heat exchanger. This is made of twin concentric helical coils, placed inside a sturdy m.s. Shell having three distinct passes of hot gases in the convective section where maximum amount of heat is extracted from the flue gases. The gases are then made to pass through the air prehater & mechanical dust collector, on way to the chimney through i.d.fan. A generously designed refractory lined external furnace is provided to ensure high furnace volume and grate area and can ensure rated output on low-grade coal and can easily burn most other fuels such as lignite, paddy husk, fire wood, bagasse, etc, without any modifications.   the safety controls and instrumentations provided ensure completely safe operation and provide audio visual alarm and cuts off the combustion in case of abnormal operating conditions.