United Technomech Engineers Private Limited Andheri, Mumbai, Maharashtra

Motorised / Manual Rack & Pinion Gate is tailor made equipment used in Cement, Steel, Power Plant to isolate material. Available in range    Required Data to submit proposal :     Size     Application     Material Handled & Bulk Density     Material Column Height above Gate     Details of Upstream / Downstream Equipments     Operating/Design Temp.     Drive     Any other specific requirement.  Material of Constn. :Selected on the basis of operating                                  parameters like Temp., Material Handled.

Motorised Sector Gate (Rolling Blade) is tailor made equipment used in Cement, Steel, Power Plant to divert material to Two Belt Conveyors e.g. at Junction Tower in Material Handling Plant. The Sector Gate can be operated during flow of material through it (without closing upstream conveyor) for diversion of material. This is possible due to its Rolling Blade design. Available in range ;    Material of Constn :  Selected based on operating parameters                                 like Temp., Material Handled.

Motorised Coffee Pot Damper is tailor made equipment used in mainly Hot Air Generator to inject cold are whenever want to reduce gas temp. or also used to take fresh air in system. These Dampers are operated by Electrical Linear Actuator. The Damper will get opened instantaneously in the event of emergency with the help of Counter Weight and Electro-Magnet. Available in range ; \Material of Constn. : Selected on the basis of operating                                   parameters like Temp., Pressure,                                   Medium Handled.

Motorised Clinker Discharge Gate is tailor made equipment are used below Clinker Stock Pile or below Silo to discharge material on Belt Conveyor or Pan Conveyor. These Gates are operated by Regulating Duty Electrical Linear Actuator. Available in range ;    Required Data to submit proposal :     Size     Width of bottom Conveyor     Any other specific requirement.

  Mechanized Chimney Damper is an appropriate customized equipment utilized mostly as a part of Heat Recovery System. For Ex: Hot Gasses from Coke Oven Plant utilized as a part of Boiler before venting to climate. It is being functioned or activated from ground level by Electrical Linear Actuator with the assistance of wire rope. It will get open immediately (in the position of boiler tripping/crisis with the assistance of Counter Weight and Electro-Magnet.) Here it is available in various sizes and dimension:   Material of Constn.  Selected on the basis of                                 operating parameters like;                                  Temp., Pressure, Medium Handled.

Size : 600 MM Width to 1500MM Width.

Motorised Bucket Type Divertor Gate is tailor made equipment used in Cement, Steel, Power Plant to divert material to Two Belt Conveyors. The jamming of Gate due to wedging of material particle between flap & chute (In Case of Flap Gate) during change over is totally avoided in this design as material is dropped in bucket from inlet hopper to get diverted by rotating bucket. The material flow also can be controlled in two outlets by operating with regulating duty Electrical Actuator. Available in range ; 

Motorised Hoisting Damper is tailor made equipment used in mainly Hot Air Generator Outlet. The Damper Casing & slide plate are Refractory lined & operated through Electrical Screw Jack Actuator. Available in range ;    Required Data to submit proposal :     Size     Location in System     Operating/Design Temp.     Operating Pressure     Leaktightness     Any other specific requirement.

Size : 500 MM DIA/SQ to 8500 MM DIA/SQ.

Butterfly Damper is tailor made equipment used in Cement, Steel & Power Generation Plant. Available in range ; Material of Constn. : Selected on the basis of operating                                    parameters like, Temp., Pressure,                                   Medium Handled, etc.  Required Data to submit proposal :     Size     Location in System     Medium Handled (Specify if content SO3)     Operating/Design Temp.     Operating Pressure     Type of Operation     Duty     Leaktightness     Any other specific requirement.

Size : 100 MM DIA/SQ to 5000 MM DIA/SQ.

Electro-mechanical Linear Actuators are used for pullingpushing, liftinglowering applications in Cement, Steel & Power generation plant e.g. operation of DamperValve, to operate material handling Gates. It is self blocking and positive drive (proper substitute to avoid problem faced with Pneumatic & Hydraulic Cylinder) to develop powerful breakaway force. The Models available in range of50 Kgs to 50,000 Kgs.

Guillotine (Isolation) Damper is tailor made equipment used in Cement, Steel & Power. These Dampers are mainly used at locations such as PASA ducts in Boilers, IneltOutlet of ESP, InletOutlet of ID Fans and wherever high leaktightness required. Available in range ; 700 MM DIASQ to 7500 MM DIASQ.

MotorisedPneumaticManual FlapDivertor Gate is tailor made equipment used in Cement, Steel, Power Plant to divert material to Two Belt Conveyors. Available in range ;Selected on the basis of operating parameters like Temp. Material Handled.Material Handled & Bulk Density, Angle between Two Outlet.

Electro-mechanical Linear Actuators are used for pullingpushing, liftinglowering applications in Cement, Steel & Power generation plant e.g. operation of DamperValve, to operate material handling Gates. It is self blocking and positive drive (proper substitute to avoid problem faced with Pneumatic & Hydraulic Cylinder) to develop powerful breakaway force. The Models available in range of 135 Ohms 400 Ohms 1000 Ohms 4-20 mA (2 Wire) 4- 20 mA(4 Wire).

“TM” Series Electro-mechanical Linear Actuators are used for pulling/pushing, lifting/lowering applications in Cement, Steel & Power Generation Plants e.g. operation of Damper/Valve, to operate material handling Gates. It is a self locking and positive drive (proper substitute to avoid problem faced with Pneumatic & Hydraulic Cylinder) to develop powerful breakaway force. The Models available in range of ;   Required Data to submit proposal :     Application     Thrust/Force     Stroke     Speed

Electro-mechanical Linear Actuators are used for pullingpushing, liftinglowering applications in Cement, Steel & Power Generation Plants e.g. operation of DamperValve, to operate material handling Gates. It is a self locking and positive drive (proper substitute to avoid problem faced with Pneumatic & Hydraulic Cylinder) to develop powerful breakaway force. The Models available in range of 50 Kgs. to 50,000 Kgs.

Motorised Pneumatic Manual Air Slide Gate is tailor made equipment installed in Air Slide in Cement. Available in range, Air Slide Size 200 MM to 600 MM.Selected on the basis of operating parameters like; Temp., Material Handled.