Vacuum Based Machinery Dealers in Goregaon, Mumbai

The bottles consistency to the rotary start – stop machine. These empty bottles arrive on to the start plate which indexes the tubes to the powder wheel where dosing of powder takes place.

• Pressure: Adjustable 0.35 to 0.7 PSI
• Brand Name: Press-N-Forge
• Valve Size: 1/2",3/4",1",2"
• Media: Transformer Oil
• Material: Brass/Bronze
• Model Name/Number: PPRV - 1,PPRV -2
• Weight: less than 1 kg
• Rotary Type: No
• Available Size: 1/2",3/4",1",2"
• Usage: Industrial

Pressure Relief Valve is a self operating valve that is used to relieve pressure by allowing the pressurized fluids to flow from an auxiliary passage out of the vessel or process system. Pressure relief valves are designed to protect chemical feed systems from overpressure damage caused by defective equipment or deadheading. When the set pressure exceeded, the pressure relief valve is forced to open & the portion of the fluid is diverted to the auxiliary route. As the fluid is diverted, the pressure inside the vessel or process system will drop and once it reaches the valve's resetting pressure, the valve will close. This will protect the vessel or process system from damage due to abnormal excess pressure conditions. Grosvenor Worldwide manufacture premium quality metallic and non metallic raw material to fabricate a high end range of pressure relief valves. Fitted at the discharge end, these pressure relief valves are used for curbing any damage or harm caused to the equipment and its components because of sudden increase in excessive pressure. Valves are available in �" to 3" sizes , pressure upto 350 kg/cm2, MOC in SS 304 / SS 316 / SS 316L or any other as per required. These type of valves are preferred by clients for its durability and long lasting life. Specification  Lifting Lever Stainless Steel Springs Adjustable Blow-Down Sizes: ¼” To 3” In BSP End ( Screw End)� & Flange End �� For Liquid Service, Valves Are Tested On Hydraulic Test Bench Testing Standard As Per API MOC: SS 304 / SS 316. Higher Capacity Level Pressure Relief By-Pass & Overpressure Protection Safety Relief Valve Spring Loaded

• Power: 230V, 50 HZ. AC
• Dimentions: 10" X 12" x 22"
• Weight: 14 kg.

Complete M.S. Cabinet With Casters For Easy Mobility,Very Low Electrical Consumption because of 14 HP. Electrical Motor With Oil immersed Vacuum Pump OR Oil free Daighpram Pump which reduce maintenance Cost, Reasonably low noise compare to other existing auto drain suctions in the market,Simple and easy to operate, Vacuum Release Valve to adjust the vacuum power as per requirement of the surgeon.

Instruction for Setting Pressure : Rotate the locknut-2 (part # 4) in clockwise direction & let it come down till available thread. Now tighten the cap (part # 3) in clockwise direction till the discharge at the outlet stops. Rotate the locknut-2 (part # 4) in anticlockwise direction & hold the cap in another spanner & tighten the locknut   Features : Oprating Temperature : 10°c to 25° c Orifice size : 6mm 100% valve are factory tested prior to despatch. Pressure can be set as per requirement.  

Pressure Relief Valve is a self operating valve that is used to relieve pressure by allowing the pressurized fluids to flow from an auxiliary passage out of the vessel or process system. Pressure relief valves are designed to protect chemical feed systems from overpressure damage caused by defective equipment or deadheading.

Vacuum Metallizer

vacuum tables, steam ironing, vapour cabinets

High Vaccum Suction Machine, Fumigation Machine

vacuum transfer system, die head machine, pencil making machine

Vacuum Blasting Machine, Aluminium Foil Machine

Centralized Vacuum System, flux recovery system, Ride On Mopping Machine