Vacuum Dryer Dealers in Vikhroli, Mumbai

Most suitable for drying of materials which cannot resist high temperature, material which are easily oxidised, volatile materials which should be retrieved, materials strong irritant and poisonous in nature. The rotocone dryer with improved technology integrates during operation under vacuum. The Dryer rotates at a very low speed (5 - 12 rpm) and thus has very low wear and tear and requires very little maintenance. This machine is ideal for crystalline products, granules used in chemical, pharmaceutical and food industries. Revovery of Loss of material is effectively collected by a specially designed pilot filter fitted on the vacuum side, Solvent recovery is through condenser & receiver. The capacity of the machine ranges from 15 liters to 5000 liters.The rotocone dryer is working under vacuum, facilitates enhanced drying efficiency, low temperature operation and economy of process by total solvent recovery. Due to vacuum, the drying is enhanced resulting in fast drying, cutting the process time, which saves heat energy and electric energy. SALIENT FEATURES : Totally sealed and protected from contamination Provision of sampling nozzle without breaking vacuum. Cyclone separator provided for recovery of any solid particle escape. Suitable size condenser & receiver provided for solvent. Mechanical seals for vacuum & hot water connection. Variable speed drive is provided for fine adjustment of the speed. ADVATAGES : Reduces drying time Uniform material shuffling over the heated contact surface of the cone. Handling and exposure of final product is avoided. Eliminates need for re-drying of lumps. System can process crystalline or amorphous powders which are prone for lumps Optimum and continuous vacuum during process. SALIENT FEATURES - GMP Model : Inner shell/Cone and contact parts in SS 316. Steam/HW water Jacket in SS 304. Insulation with jacket in SS 304. Cyclone separator in SS316. Condenser (shell & tube type) and Receiver ( cylindrical & cone type) in SS304 Digital Temperature Indicators (FLP) at Hot Water inlet and outlet. Digital Temperature Indicator (FLP) and Dial Vacuum Gauge in vapor line. Digital Temperature Controller (FLP) with Pneumatic Valve at Hot water inlet. Butterfly valve (SS316) at discharge port with dummy and hand wheel. Stand and Structure in SS 304 / MS with SS304 cladding. Drive unit enclosed with SS304 Covers Dry Mechanical Seal for vacuum side. Dry Mechanical Seal for Waterside. FLP Motor & FLP Control panel enclosed in SS304 panel Provision for Nitrogen purging/Vacuum release with interlocking to isolation valve. Temperature and Vacuum Gauges (Dial Type) on Cone. Safety Guard/railing telescopic type with limit switch (FLP) with interlocking. Drain plug and safety valve on Hot Water / Steam Jacket. Pulse jet type dust filter is provided inside the cone. Positioning wheel /inching button for cone DRIVE SYSTEM : Gear Box & Motor Direct Coupled and Gear Box to Cone Drive shaft Bull Gear-Pinion Gear Drive. Extended shaft (drive side) so that drive unit can be kept in service zone (if required) Vacuum loading system of wet material into the Cone. PHARMA FINISH : Internal 320 Grit Mirror Polish and Outer 180 Grit Mat Finish. OPTIONALS : Cantilever (One side base) construction for small models only. VFD for Drive Motor with RPM indicator. Condenser and Receiver in SS316 instead of SS304. Lump breakers with FLP motor, Mechanical seals and electrical slip-ring joint. Auto Bin loading mechanism with accessories. Vacuum pump with FLP motor. Hot water system (steam heated) with tank and circulation pump.

We offer our clients a wide range of Rotary Cone Vacuum Dryers that is available in various capacities ranging from 20 Ltrs. to 5000 Ltrs. Our range is manufactured using superior quality material, and is available in STD, GMP & CGMP designs. Further, these can also be customized as per the specifications provided by our clients.RCVD is suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. The equipment can also be used as rotary evaporator.

Location of Gland sealing arrangement right next to the shell. Positive circulation of Hot Water is ensured with no chances of by-pass or short circuiting No Rotary Pressure Joints are used (which are the potential source of leakages). Inert gas purging pulsing is possible with vacuum "ON" (No need to shut-off Vacuum for Nitrogen admission).

• Tray Size: 16 x 32 x 1.25 (h) inches

All stainless steel 304 316 316L CGMP or mild steel externals with stainless steel internals (vapor and product contact parts), Hollow pad type heating shelves which are easily removable for maintenance, Condensor and condensate receiver fitted on the dryer body or stand alone for remote installation, Fully welded skirt on vacuum dryer body for flush mounting through the wall,M External insulation of dryer with protective panels in stainless steel or mild steel powder coated,M Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid.for temperature requirements above 95 degree centigrade.

Energy Consumption is Low due to higher differential temperatures. Suitable for drying materials which are sensitive to heat, it can maintain low temperatures using high vacuum. Maximum Solvent Recovery is done.

double planetary mixer, Ointment Transfer Pump, Jacketed Tanks

Drum Dryer, oil dryer, Spin Flash Dryer