Butterfly Valves Dealers in Goregaon, Mumbai

• Description: 2/2 way manually wheel operated Ebonite Lined diaphragm valve. End to end design as per  BS EN 558-1:1995.
• Size / End Conn.: 15 NB to 100 NB / Screwed BSP & Flanged end (ASA 150#, BS 10 Table 'E', 'D', 'F') , For above sizes consult us.
• MOC: STD - IS 210 Gr FG 220 (Cast Iron with Ebonite Lining) Optional - IS 1865 -1991 SG 400/18 (Ductile Iron with Ebonite Lining)
• Diaphragm: STD - Nitrile, EPDM and EPDM backed by PTFE
• Temp.: STD - 80°C Optional - 110°C
• Actuator: STD - Manual - ABS, Cast Iron Wheel

We are the main supplier of this product.

• Size: Available In Different Sizes
• Pattern: Plain
• Automatic Grade: Manual
• Feature: Durable
• Type: Directional Control Valves
• Finish: Polished

• SIZES: 50 MM TO 600 MM

Tdk rubber lined butterfly valve is most economical THESE VALVES CAN BE USED FOR CORROSIVE SERVICE AT LOWER COST. here the entire flap is bonded with rubber and the body is also enveloped with rubber sleeve and hence no metal part comes in contact with the flow media.

Customers highly prefer us because of our practice of delivering the orders in an organized condition and on time. We lay great stress on packaging and make sure the materials used for packs are industrial grade and superior. Each pack is labeled properly and it carries essential product details.   Detaills : Valve is equipped with a Butterfly Flap, which can be turned to Open and Close the valve. Valve remains in Open position when the transformer is in "On-load" condition. For Inspection and Repair of radiator, the Butterfly flap is closed and the Radiator is detached from the transformer. We manufacture Complete Range, from 50mm to 200mm.   Exclusive Features of our Radiator Valves : Our flap has an Angular Flat edge, as compared to the conventional V shape which has only line contact with the valve body. Flat edge ensures almost Zero leakage. Shell moulded, Shot blasted and Fettled CI casting (IS-210, Grade 200) for Zero body Leakage and better finish. Streamlined Flap design minimizes Frictional Resistance to fluid flow. No Rubber lining, yet leak proof. Valve is able to lock in "OPEN" and "SHUT" position by cap.

• Material: Carbon Steeel
• Color: Metallic
• Number Of Way: 3way, 4way
• Size: 2inch, 3/4inch
• Type: Eccentric
• Technics: Gear Operated, Hard Sealing
• Structure: Double Half Shaft, Pinless
• Feature: Blow-Out-Proof, Casting Approved

In order to cater variegated requirements of the customers, we make available PE Butterfly Valve in different dimensions. We are one of the leading Manufacturers and Suppliers of PE Butterfly Valve. We manufacture PE Butterfly Valve using highly advanced techniques in compliance with the set industry standards. We are efficient enough to process retail as well as bulk orders for PE Butterfly Valve even at short notice period.

We are strongly backed by a smart logistics network owing to which we are capable to deliver the product range in safe and timely manner. We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss.   Details : Standard : BS 5155 / MSS Sp.67/Api 709 Rating : 150 Class Type : Sleeve And Linned Body & Flap Options : SS 316 And SS 304 Sleeve Options : Nirile, Neoprene, Butyle, Epdm, Hypalon Silicon, Viton, PTFE, etc.

We are the supplier of this product.

• Body Material: Ductile Iron, Stainless Steel
• Size Range: 3“ – 24”
• Temperature Range: Up to 120°C
• Pressure Rating: PN10, PN16, PN25
• Connections: Flange, Mechanical Joint
• Operating: gear box, electric actuator, fuid drive, Pnumatic drive

Features  Full rubber lined inside body toensure no fuid contact with the body, sono corrosions. Streamlined disc design

Butterfly valves can be welded,screwed,clamped or flange-fitted into the stainless steel lines and can be actuated manually or automatically as needed.Wide choice of end fittings in male/butt-weld combinations to keep installation costs to a minimum while offering maximum flexibility for maintenance.Butterfly Valves offer great durability and ease of use for a wide range of services. Easy to install and maintain, butterfly valves close under pressure to form a leak-tight seal. End Connections: IDF,SMS,DIN,TC Clamp,butt-weld;(special design with mating flanges that butt-weld to the tube). Material: Machined from SS 304,SS 304L,SS 316L bar stock,fully polished as standard.The standard handle or air actuator is also made from stainless steel.Other actuators available to special order. Sizes:To suit tube outside diameters of 1",1½",2",2½"and 4".

• Feature: Easy installation, Superior performance, Lightweight

Radiator (Butterfly) Valves are used as shut off valves for detachable radiators of Oil Cooled transformer, Valve is equipped with a Butterfly Flap, which can be turned to Open and Close the valve, Valve remains in Open position when the transformer is in "On-load" condition, For Inspection and Repair of radiator, the Butterfly flap is closed and the Radiator is detached from the transformer, We manufacture Complete Range, from 50mm to 200mm.

• Feature: Durable
• Application: Water Fitting
• Pressure: High Pressure
• Material: Cast Iron
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 4/5inch, 5/6inch, 6/7inch

Butterfly valve , wafer type , Lug type, flange type PN 10, PN 16, PN 20, PN 25, Size: 1 12'' To 48'' Material of construction : Cast iron, Cast steel, SS 304, SS 316, Duplex, Alloy Steel

• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch
• Material: Polypropylene
• Color: Multi Colour
• Technics: Gear Operated, Hard Sealing
• Power: Solenoid
• Structure: Double Half Shaft, Pinless
• Feature: Blow-Out-Proof, Casting Approved
• Port Size: 0.1mm-5cm, 2cm -50cm
• Number Of Way: 2way
• Type: Valve

• Type: Flange End Type
• Specialities: Non Breakable, Investment Casting
• Design & Manufacturings: As per Manufacturer's Standard
• End Connections: Flanged as per ASA 150
• Available M.o.c.: Pp (polypropylene), Hdpe (high Density Polyethylene), Isotactic Pp, Pvdf (polyvinylidene Fluoride)

high alloy butterfly valves, Butterfly Valves, Dual Plate Check Valves

• Body:  Cast Iron, Spheroidal graphite Iron, Gun metal, stainless steel, WCB
• Disc:  SS 304, SS 316, SS 410, WCB, Aluminum bronze IS 305 Grade 2
• Seat:  EPDM, Nitrile, Viton, Neoprene, etc
• Shaft:  SS 410, SS316, SS410
• Bearing bush:  PTFE
• 'O' Ring:  EPDM, Nitrile, Neoprene
• Plug:  Carbon Steel
• Hand lever: Mild Steel

A team of our adept professionals is devotedly engaged in offering a wide gamut of Butterfly Valve. This product is used for water and oil works purposes. It is manufactured by experts that possess immense experience in this domain and are well versed with the advance production techniques. Further, this product is strictly tested at various stages of the manufacturing process in order to ensure their compliance with the set global norms.   Features: Robust construction Perfect design Easy to install   Application: The Butterfly valves designed in accordance with IS 13095:1991 (BS 5155) and used for mainly water and oil works purposes. Butterfly valves are commonly used as control valves in applications where the pressure drops required of the valves are relatively low. Butterfly valves can be used in applications as either shutoff valves (on/off service) or as throttling valves (for flow or pressure control). As shutoff valves, butterfly valves offer excellent performance within the range of their pressure rating. Typical uses would include isolation of equipment, fill/drain systems, bypass systems and other like applications where the only criteria for control of the flow/pressure is that it be on or off.

• Type: Butterfly Valves

A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway

We expertise in manufacturing high quality rubber parts which are used on a heavy scale in Pumps (Industrial Pumps, Hydraulic & Pneumatic Pumps, Chemical process & acid pumps, Submersible pumps, Waste water & Slurry pumps, etc) Valves (Solenoid valves, Pneumatic & Hydraulic valves, Pressure regulators valves, control valves, Saunders valves, valves for Actuators, Butterfly valves, Gate valve, Check valve etc.)