Butterfly Valves Dealers in Marol, Mumbai

We Offer You the Latest Range of Butterfly Valves. They Find Applications in Chemical Industries. These Butterfly Valves are Used to Control the Flow of Fluid Flowing Through a Section of Pipe. the Butterfly Valves are Available in a Wide Range of Sizes. We also Provide Made-to-order Butterfly Valves to Suit Our Customers’ Various Requirements. features high Performancemade to Order as per Customer Needs Quality as per Industry Standards Extensive Range of Sizes applications chemical Industries High Pressure Applicationsflow Control Mechanical Systems.

Application – Single or double-acting cylinders. Actuation – Lever operated, detent positioned. Functions – Pos. 1 – Oil is directed to “advance” side of cylinder, oil from “retract” side goes to reservoir; cylinder “holds” with pump shut off. Pos. 2 – Oil goes to “retract” side of cylinder; cylinder “holds” with pump shut off. When using as a 3-way valve for single-acting cylinders, port “A” or “B” is plugged. Used on these pumps – P460, PA6D, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series. NOTE: 9504 can be remote mounted with a 9510 Subplates. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to this valve. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9504, 9584, 9610 and 9610A, order four 12001 cap screws. For valve 9582, order two 12001 and two 10856 cap screws. NOTE: Valves 9501, 9502, 9504 and 9507 can have a port blocked or have a closed center position. When a port is blocked and the valve is shifted to the blocked port, the pump will generate excessive heat. An electric or rotary air pump can either be turned off manually or with a pressure switch. Reciprocating air pumps may be adjusted to stall out and stop. NOTE: Gauge ports monitor pump pressure only, not pressure to the hydraulic cylinder(s).

L&T Valves manufactures a comprehensive range of Integrally-moulded Butterfly Valves. The product portfolio comprises Aquaseal Plus (Class 150) and Aquaseal (PN 10) Butterfly Valves. Aquaseal Butterfly Valves are designed for high performance in HVAC, water distribution, utility and fire water systems.

• Country of Origin: India
• Size: Standard
• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISI Certified
• Application: Industrial
• Technics: Gear Operated
• Brand Name: HAMA

The Butterfly Valve, manufactured and exported by falcon engineers, are largely used for the flow regulation in which the disc takes the form of disk. We provide butterfly valves in various sizes according to the client’s requirements. As a result, we have emerged as the trustworthy manufacturer and exporter of butterfly valves. benefits allows for quick shut off to make a fluid start or stop flowing through a section of pipe standards api 609bs 5155awwa c 504testing api 598flanged end ansi b 16.5fire safe api 607 features light weightsupports pressures up to 700 barsdurablewithstands temperatures up to 200ocperfect shutoff even after years of disuseeasy to repair and operateversatile application areas sugar millscement plantfertilizer industryoil & gas industrychemical industrypharmaceutical industrypower plant

Application Throttling Features / Benefit: Throttling Single & Double Eccentric Design Full Lug & Semi Lug Type Design Top Mounting Pad as per ISO 5211 Unique Stem retention design to provide blow out proof stem & easy assembly & disassembly of valves Heavy Duty square grooved seat design with moulded O ring seals to act as flange gasket Self energizing seating design Through flow disc design for large size Butterfly Valves Different Lining and Metallurgy to suit a wide variety of applications including sea water & water desalination plants   Ansi Class / Rating : PN 10, PN 16, PN 20 Design Standard : BS EN 14432 Testing Standard: API 598 Size: 50 mm to 500 mm Materials :Body : Cast Iron, WCB, CF8, CF8M, Hast Alloy, Super Duplex, Alloy 20 , LCB etc Disc : Ductile Iron, WCB, CF8, CF8M, Hast Alloy, Super Duplex, Alloy 20 , LCB etc Seals : EPDM, Nitrile, Viton, Metal Seated etc Ends Operation : Wafer End Mannual, Pneumatic, Electric

S.S. Butterfly Valve and S.S. Soft Flap Valve for Tablet Container The sanitary butterfly valve is designed to handle powders and granules and can be installed on bins or vessels, containers and pipes Capacity : Dia. – 75 mm. to 400 mm.

• Minimum Order Quantity: 1500 Pieces
• Production Capacity: 10000 pieces
• Delivery Time: 15 days

A leading organization in the domain of manufacturing, supplying, importing and exporting, we are engaged in offering a wide range of Soft Seated Butterfly Valve. These valves are designed and developed using advanced technology in order to make them in compliance with all the international quality standards. Therefore, these valves are excessively used in various industrial and automobile applications Other Information

• Brand Name: CTK
• Material: Stainless Steel
• Country of Origin: Made in India
• Usage/Application: Industrial
• Surface Finishing: Polished
• Grade: Ss 304

ROYAL ENGINEERING supplies top quality Triple Eccentric Butterfly Valves which meet all the quality norms and stand upto the international standards. We have a diverse range of Triple Eccentric Butterfly Valves from some of the pioneering manufacturers of these valves. These have better sealing abilities. We provide Triple Eccentric Butterfly Valves at very reasonable prices and deliver them in a short span of time. Features : Sizes from 3” to 200” diameterRobust designEfficient performanceLong life

Wafer Style Commercial Butterfly Valves Sizes (2” - 24”): General Purpose Commercial Wafer Body Style Butterfly Valves fit between ANSI Class 125 or Class 250 Flanges. Valve Body shall be cast grey iron ASTM 126 Grade B. Valve stem are be 304 stainless steel . The disc material is 316 stainless steel. The seat material is EPDM. The stem seals o-rings are made of EPDM. Valves 2” - 8” are lever operated and valves 10” and larger can be gear operated unless automatic operation is preferred. Wafer Style Butterfly Valve are suitable for air service for temperature up to 250°F. Wafer Body Butterfly

The Audco Slimseal is a wafer type butterfly valve with an integrally bonded elastomer liner. Requiring absolutely no form of maintenance the Slimseal is a perfect “fit and forget” valve. Available with flangeless, lugged or flanged body, in a size range of 50-900 mm, a pressure rating of up to PN20 and offered with latching lever or actuation as well as different combinations of disc and seat materials, the Slimseal is truly versatile valve.

• Brand Name: Intervalve
• Power: Manual
• Operation Type: By Lever, By Actuator
• I deal in: New Only
• Specialities: Unmatched quality, Highly durable, Hassle-free performance

• Compressor: SS-ASTM A351 CF8.

Heavily Lined Body with proper selection of diaphragm, provides unique control on corrosive liquids. Fluids are completely isolated from the actuator and environment. This bi-directional valve is 'Hygienic' design, can be sterilized and has a low turbulence to flow.Valve Body :CS-ASTM A216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351 CF8 (DIN 1.4301). SG Iron-ASTM A536, Gr.60-40-18 (DIN 0.7043) (GGG40.3).

VALTECH” wafer design, BUTTERFLY VALVES are designed and manufactured with reference to standard API 609 for Pipelines 40NB and above. They are available in Wafer design sandwich type as well as Flanged ends. If required, Valves can be offered under any THIRD PARTY INSPECTION . “VALTECH” BUTTERFLY VALVES are available in various materials like Conforming to Cast Iron with SG Iron Disc and Nitrile Sleeve, Cast Carbon Steel ASTM-A-216 Gr. WCB, Cast Alloy Steel like ASTM-A-217 Gr. WC-6 / WC-9; and Cast Stainless Steel like ASTM-A-351 Gr. CF-8, CF-3, CF-8M & CF-3M. Size range starts from 40 NB through 900NB and pressure rating 125# & 150#.

• Sizes: 3
• Pressure classes: 125 lbs and 150 lbs

Manufacturing Facilities: State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate I SO, 9001-2008 certified operations. Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED. Facility and products approved by Global Engineering Consultants and Contracting companies. Well-equipped testing and inspection facilities. World class finishing and packagind processes Well documented and appropriately preserved inventories. And above all competent and caring human resources. Ball Valves Floating ball Valves: Carbon steels, stainless steels and variety of alloy steels. Two piece and three piece designs. Soft seated and metal seated; 150, 300 and 600 lbs in cast version, 800 lbs in Forged Bar. Full Bore and reduced bore; sizes ½" to 8". Trunnion-mounted Ball Valves Carbon steels, stainless steels and variety of Alloy steels. Two piece and three piece designs. Soft seated and metal seated. 150, 300 and 600 lbs in cast version- in forged Sizes: 3" to 24" Butterfly Valves Wafer, Lugged and Flanged: - Cast iron, Cast Steel and Stainless Steel Body; Moulded seat, Pressure classes 125 lbs and 150 lbs. Sizes: 3" to 24" Triple-offset, Metal seated: - Carbon steels, Stainless Steels and variety of Alloy steels, Pressure classes 150, 300 and 600 lbs Sizes: 3" to 24" Gate, Globe and Check Valves In cast version: Carbon Steels and Stainless Steels, 150, 300 and 600 lbs sizes ½" to 12" In Forged: Carbon Steels, Stainless Steels and Alloy Steels, 150 to 2500 lbs sizes ½" to 2"

• Port: worldwide
• Standard or Nonstandard: Standard
• Lead Time: ex-stock available
• Packaging Details: EXPORT PACKING
• Supply Ability: 10 Set/Sets per Week

• Brand Name: FlowBiz
• Material: Body : ASTM A 216 Gr. WCB A 351 Gr. CF8 / CF8M / CF3M
• Pressure: As Per 150# B16.34
• Port Size: 2 inch to 12 inch (50mm to 300mm)
• Power: Manual
• Size: 2 inch to 12 inch (50mm to 300mm)
• Temperature Of Media: High Temperature
• Media: oil and gas, HVAC, waste and wastewater treatment facilities, Shipbuilding factories.
• Country of Origin: Made in India
• End Connection: WAFER TYPE"
• Operator: Gear Oprated
• Valve Size: 2 inch to 12 inch (50mm to 300mm)
• Connection Type: WAFER TYPE"
• Design Type: Triple Offset
• Model Name/Number: FlowBiz-Triple-Offset-Butterfly-Valve
• Packaging Type: Wooden Box and corrugated box on request.

Butterfly Valves, Ball Valves, Check Valves, Diaphragm Valves, Globe Valves

ELECTRIC ACTUATED BUTTERFLY VALVES, solenoid valve coils

Manual Diaphragm Valves, Pneumatic diaphragm valves, Air Operated Valve

Butterfly valves are quarter-turn rotary motion valves used as throttling valves to control flow through a system. They can be used with many different media. Butterfly valves offer several advantages including quarter-turn, openness for less plugging, and good control capabilities.

Butterfly Valve, air ducting, compressor fittings, Dairy Fittings

Butterfly Valves, Ball Float Steam Trap, Thermodynamic Steam Trap

Butterfly Valves, AUDCO VALVES, Pressure Seal Valve, Check Valves

Butterfly Valve, Gate Valve

hand lever valve, Rod Eye Bolt, DNC Type Pneumatic Cylinder, Pilot Valve

Hand Lever Operated Jackated Type Ball Valve, Flamp Proof Limit Switch Box

Gear Operated Butterfly Valve, Reflux Valve