Butterfly Valves Dealers in Midc, Mumbai

3-WAY/3-POSITION (CLOSED CENTER) NON-INTERFLOW MANUAL VALVE WITH POSI-CHECK® Application – Single-acting cylinders. Actuation – Lever operated, detent positioned. Functions – Pos. 1 – Oil is directed from pump to cylinder and “holds” with pump shut off; line to reservoir is blocked. Pos. 2 – All oil is open to reservoir through tank line. Center pos. – Cylinder pressure is held; pump should be shut off. Used on these pumps – P460, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series. 10,000 PSI., 3/8" PORTS, 5 GPM MAX FLOW RATE. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached if desired. NOTE: Also, valve may be remote mounted with a 9510 Subplates. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) orCounter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. NOTE: Valves 9501, 9502, 9504 and 9507 can have a port blocked or have a closed center position. When a port is blocked and the valve is shifted to the blocked port, the pump will generated excessive heat. An electric or rotary air pump can either be turned off manually or with a pressure switch. Reciprocating air pumps may be adjusted to stall out and stop. NOTE: Gauge ports monitor pump pressure only, not pressure to the hydraulic cylinder(s). IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9502 and 9520, order four 12001 cap screws. For valve 9576, order four 17428 cap screws.

• Compressor: SS-ASTM A351 CF8.

Heavily Lined Body with proper selection of diaphragm, provides unique control on corrosive liquids. Fluids are completely isolated from the actuator and environment. This bi-directional valve is 'Hygienic' design, can be sterilized and has a low turbulence to flow.Valve Body :CS-ASTM A216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351 CF8 (DIN 1.4301). SG Iron-ASTM A536, Gr.60-40-18 (DIN 0.7043) (GGG40.3).

Application Throttling Features / Benefit: Throttling Single & Double Eccentric Design Full Lug & Semi Lug Type Design Top Mounting Pad as per ISO 5211 Unique Stem retention design to provide blow out proof stem & easy assembly & disassembly of valves Heavy Duty square grooved seat design with moulded O ring seals to act as flange gasket Self energizing seating design Through flow disc design for large size Butterfly Valves Different Lining and Metallurgy to suit a wide variety of applications including sea water & water desalination plants   Ansi Class / Rating : PN 10, PN 16, PN 20 Design Standard : BS EN 14432 Testing Standard: API 598 Size: 50 mm to 500 mm Materials :Body : Cast Iron, WCB, CF8, CF8M, Hast Alloy, Super Duplex, Alloy 20 , LCB etc Disc : Ductile Iron, WCB, CF8, CF8M, Hast Alloy, Super Duplex, Alloy 20 , LCB etc Seals : EPDM, Nitrile, Viton, Metal Seated etc Ends Operation : Wafer End Mannual, Pneumatic, Electric

ROYAL ENGINEERING supplies top quality Triple Eccentric Butterfly Valves which meet all the quality norms and stand upto the international standards. We have a diverse range of Triple Eccentric Butterfly Valves from some of the pioneering manufacturers of these valves. These have better sealing abilities. We provide Triple Eccentric Butterfly Valves at very reasonable prices and deliver them in a short span of time. Features : Sizes from 3” to 200” diameterRobust designEfficient performanceLong life

• Port: worldwide
• Standard or Nonstandard: Standard
• Lead Time: ex-stock available
• Packaging Details: EXPORT PACKING
• Supply Ability: 10 Set/Sets per Week

• Minimum Order Quantity: 1500 Pieces
• Production Capacity: 10000 pieces
• Delivery Time: 15 days

A leading organization in the domain of manufacturing, supplying, importing and exporting, we are engaged in offering a wide range of Soft Seated Butterfly Valve. These valves are designed and developed using advanced technology in order to make them in compliance with all the international quality standards. Therefore, these valves are excessively used in various industrial and automobile applications Other Information

Butterfly valves are quarter-turn rotary motion valves used as throttling valves to control flow through a system. They can be used with many different media. Butterfly valves offer several advantages including quarter-turn, openness for less plugging, and good control capabilities.

• Brand Name: Intervalve
• Power: Manual
• Operation Type: By Lever, By Actuator
• I deal in: New Only
• Specialities: Unmatched quality, Highly durable, Hassle-free performance

S.S. Butterfly Valve and S.S. Soft Flap Valve for Tablet Container The sanitary butterfly valve is designed to handle powders and granules and can be installed on bins or vessels, containers and pipes Capacity : Dia. – 75 mm. to 400 mm.

The Audco Slimseal is a wafer type butterfly valve with an integrally bonded elastomer liner. Requiring absolutely no form of maintenance the Slimseal is a perfect “fit and forget” valve. Available with flangeless, lugged or flanged body, in a size range of 50-900 mm, a pressure rating of up to PN20 and offered with latching lever or actuation as well as different combinations of disc and seat materials, the Slimseal is truly versatile valve.

We Offer You the Latest Range of Butterfly Valves. They Find Applications in Chemical Industries. These Butterfly Valves are Used to Control the Flow of Fluid Flowing Through a Section of Pipe. the Butterfly Valves are Available in a Wide Range of Sizes. We also Provide Made-to-order Butterfly Valves to Suit Our Customers’ Various Requirements. features high Performancemade to Order as per Customer Needs Quality as per Industry Standards Extensive Range of Sizes applications chemical Industries High Pressure Applicationsflow Control Mechanical Systems.

• Brand Name: CTK
• Material: Stainless Steel
• Country of Origin: Made in India
• Usage/Application: Industrial
• Surface Finishing: Polished
• Grade: Ss 304

• Brand Name: FlowBiz
• Material: Body : ASTM A 216 Gr. WCB A 351 Gr. CF8 / CF8M / CF3M
• Pressure: As Per 150# B16.34
• Port Size: 2 inch to 12 inch (50mm to 300mm)
• Power: Manual
• Size: 2 inch to 12 inch (50mm to 300mm)
• Temperature Of Media: High Temperature
• Media: oil and gas, HVAC, waste and wastewater treatment facilities, Shipbuilding factories.
• Country of Origin: Made in India
• End Connection: WAFER TYPE"
• Operator: Gear Oprated
• Valve Size: 2 inch to 12 inch (50mm to 300mm)
• Connection Type: WAFER TYPE"
• Design Type: Triple Offset
• Model Name/Number: FlowBiz-Triple-Offset-Butterfly-Valve
• Packaging Type: Wooden Box and corrugated box on request.

Pneumatic Actuated Butterfly Valves, solenoid valve coils

Triple Offset Butterfly Valves

Sluice Gate Valve, high pressure globe valves

Butterfly Valve AUDCO L&T, Hand Operated Forged Carbon Steel Valves

hi-flow brand ball valve, jacketed ball valves, traps, bellow seal valves

Flamp Proof Limit Switch Box, Vac Linear Actuator, Air Volume Booster

Tube Fittings, Tanks, pumping equipment, Heat Exchanger Tube

AUDCO Slimseal Butterfly Valves

air ducting, compressor fittings, Dairy Fittings, expander rollers

hand lever valve, DNC Type Pneumatic Cylinder, Pilot Valve

Chemical Process Pumps, Lined Valves, Pressure Valves