Butterfly Valves Dealers in Palghar, Mumbai

• Features: Hand lever operated ,Sturdy valve design, Highly efficient operation, Rust resistant design

Accessories: Extension spindle Street covers Handwheel Stem cap for rod Adaptor gearside Post indicator Dismantling joint Combi-flange Adaptors different types of gearboxes and electric actuators Double eccentric butterfly valve, for water to max. 70° C, designed according to EN 593, Face to face according to EN 558 table 2 basic series 14. Standard flange drilling to EN1092-2 (ISO 7005-2) Hydraulic test according to EN 1074-1 and 2 / EN 12266.   Features & Benefits Double eccentric designThe double eccentric design gives minimal wear of the disc seal, as the disc swings open/close like a door relieving the stress on the seal just after a few degrees of opening. The seal is fully compressed in closed position which gives 100% drip-tight closure. The disc and seat are designed to give the lowest possible operating torque in opening and closing direction at full differential pressure. Shaft sealingEncapsulated O-rings, self-lubricating bearings and bronze bushings protect against galvanic corrosion. Disc and seat designThe slim and streamlined disc design ensures low pressure loss across the valve, and the disc enables bi-directional flow. The seat is casted in the valve body, which is epoxy coated to avoid corrosion. The disc seals are mounted in a stainless steel retainer ring, and are exchangeable independent of flow direction. The disc is fixed by means of a keyway and set screws protecting against flutter between shaft and disc.

• Size: 2”to 16”

Wafer type slim body butterfly valve with actuator Slim design is tailor made having provisions for mounting holes on Butterfly-valve Body itself matching mounting dimensions as per requirement. Valve and actuators are designed and manufactured as per GMP norms.

SIZE RANGE: 2” – 12” MATERIAL OF CONSTRUCTION: BODY: Ductile Iron A395 or WCB A216, Lining PFA – D3307 Type II or FEP – D2116 Type IIIDISC LINING: PFA – D3307 Type II or FEP – D2116 Type IIIDISC INTEGRAL STEM: SS A351CF8M,SEAT: Virgin PTFE – D1457SEAT BACKUP: EPDM / SiliconHANDLE UNIT: S. G. Iron EN 15-63 No. EN-JS1050 / Processed Carbon Steel SURFACE: External surface are painted with Red oxide primer.  Dimensional details are as per below table

• Country of Origin: India
• Size: Standard
• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISI Certified
• Application: Industrial
• Technics: Gear Operated
• Brand Name: HAMA

• Material: Cast Iron
• Feature: Blow-Out-Proof, Casting Approved
• Pressure: 1.0Mpa
• Technic: Hot Rolled
• Surface Finish: Coated
• Temperature: 0 degree Celsius to +70 degree Celsius

• Valve Size: 2 to 24 inch
• Brand Name: Audco
• Material: Cast Iron
• Certification: ISO 9001:2008 Certified
• Country of Origin: India
• Usage: Water Fitting
• Type: Butterfly Valves
• Condition: New
• Automatic Grade: Manual
• Warranty: 1 Year
• Media: Gas
• Packaging Size: 5 Pieces
• Temperature Pressure: High Temperature Pressure
• Driving Mode: Manual

The Butterfly Valve, manufactured and exported by falcon engineers, are largely used for the flow regulation in which the disc takes the form of disk. We provide butterfly valves in various sizes according to the client’s requirements. As a result, we have emerged as the trustworthy manufacturer and exporter of butterfly valves. benefits allows for quick shut off to make a fluid start or stop flowing through a section of pipe standards api 609bs 5155awwa c 504testing api 598flanged end ansi b 16.5fire safe api 607 features light weightsupports pressures up to 700 barsdurablewithstands temperatures up to 200ocperfect shutoff even after years of disuseeasy to repair and operateversatile application areas sugar millscement plantfertilizer industryoil & gas industrychemical industrypharmaceutical industrypower plant

• Material: MS and SS
• Brand Name: Unique Valves & Engineers
• Pressure: 225 Psi
• End Connection: Flanged
• Operator: Lever

VALTECH” wafer design, BUTTERFLY VALVES are designed and manufactured with reference to standard API 609 for Pipelines 40NB and above. They are available in Wafer design sandwich type as well as Flanged ends. If required, Valves can be offered under any THIRD PARTY INSPECTION . “VALTECH” BUTTERFLY VALVES are available in various materials like Conforming to Cast Iron with SG Iron Disc and Nitrile Sleeve, Cast Carbon Steel ASTM-A-216 Gr. WCB, Cast Alloy Steel like ASTM-A-217 Gr. WC-6 / WC-9; and Cast Stainless Steel like ASTM-A-351 Gr. CF-8, CF-3, CF-8M & CF-3M. Size range starts from 40 NB through 900NB and pressure rating 125# & 150#.

Make: Leader, W.J. , KSB ,  Avcon ,  Kalpaka,  Air Max

We are one of the well-known Butterfly Valves manufacturers. We have a team of trained technocrats which has abundant experience in dealing with all sorts of industrial butterfly valves. Moreover, we are specialized in the manufacturing of different types of butterfly check valves.

We have appeared as one of the most illustrious names in the industry affianced in offering a qualitative assortment of Offset Butterfly Valve on large scale. These valves are designed by trained professionals who are familiar with latest market trends using top-notch quality material and cutting-edge techniques. In addition to this, we also make sure that these valves are in conformation with the set industry quality guidelines. Features: Flawless quality Safe performance High efficiency

It has unique eccentric configuration. It is of compact configuration, good bellows seal and long performance life, and has two functions of both the regulating and shut-off valves. It is widely applied to chemical plant, paper making, electric power, spinning mill, pharmacy, packinghouse and sewage farm under regulating and controlling systems Main technical parameters: Nominal size: DN 50-600mm Nominal pressure: ANSI 150-600lbs Flange standards: ANSI Leakage class: ANSI IV/V/VI Body's material: WCB/CF8/CF8M Characteristics: Equal percentage Temperature range: -60~+450°C

Available in various dimensions and specifications, our wide range of Butterfly Valves is fabricated from the finest quality mild steel and stainless steel. The Butterfly Valves are primarily employed with lap joint stubs and highly appreciated by clients across the country. Moreover, Butterfly Valves are offered keeping in view the existing market standards and requirements.Specifications Pressureclass : PN-10 Manufacturing STD. : BS 5155/AP1609 Body Material : WCB/IS 210 GR.20-25/CF8/CF8m Disc Material : WCB/IS 210 GR.20-25/CF8/CF8m Spindle Material : AISI 410/304/316 Lining Material : NITRIL/EPDM/HYPALON/ VITON/ BUTYLE/ NEOPENE 'O' RING Material : NITRIL Pin Material : AISI304 Lever Material : IS 210 FG200 Salient Features Corrosion resistant Highly robust Abrasion resistant Superior quality Cost-effective

Wesman manufactures its own range of Butterfly valves that are used for manual motorized input control and for balancing of burner firing rates. Butterfly valves are used to control air required in the burner inlet for complete combustion. Butterfly valves should be the same pipe size as the equipment in the line they are serving in order to give a negligible pressure drop when the butterfly valve is fully open.

Driven with perfection, we are engaged in manufacturing and supplying a gamut of Butterfly Valves. Manufactured using quality raw material procured from reliable vendors in the market, these valves are stringently tested for quality through various quality checking procedures.

• Sizes: 3
• Pressure classes: 125 lbs and 150 lbs

Manufacturing Facilities: State-of-the art production facilities in Kundaim, Goa and in Pune, Maharashtra; spread over a lakh of sq. feet in aggregate I SO, 9001-2008 certified operations. Facility accredited under CE marking, ASME, U,PP and R Stamps as well as PED. Facility and products approved by Global Engineering Consultants and Contracting companies. Well-equipped testing and inspection facilities. World class finishing and packagind processes Well documented and appropriately preserved inventories. And above all competent and caring human resources. Ball Valves Floating ball Valves: Carbon steels, stainless steels and variety of alloy steels. Two piece and three piece designs. Soft seated and metal seated; 150, 300 and 600 lbs in cast version, 800 lbs in Forged Bar. Full Bore and reduced bore; sizes ½" to 8". Trunnion-mounted Ball Valves Carbon steels, stainless steels and variety of Alloy steels. Two piece and three piece designs. Soft seated and metal seated. 150, 300 and 600 lbs in cast version- in forged Sizes: 3" to 24" Butterfly Valves Wafer, Lugged and Flanged: - Cast iron, Cast Steel and Stainless Steel Body; Moulded seat, Pressure classes 125 lbs and 150 lbs. Sizes: 3" to 24" Triple-offset, Metal seated: - Carbon steels, Stainless Steels and variety of Alloy steels, Pressure classes 150, 300 and 600 lbs Sizes: 3" to 24" Gate, Globe and Check Valves In cast version: Carbon Steels and Stainless Steels, 150, 300 and 600 lbs sizes ½" to 12" In Forged: Carbon Steels, Stainless Steels and Alloy Steels, 150 to 2500 lbs sizes ½" to 2"

sandwitch type butterfly valve, Fabrication & S.s. Pipe Fittings

push pull valve, Pneumatic Rotary Actuators

Pressure Seal Valve, Check Valves, pipes & fittings, Api Gate Valve

Alloy Butterfly Valve

stainers, Pipe Fitting, Flanges, Steam Trap

ss butterfly valves, High Pressure Ball Valves, Pressure Reducing Valves

stream trap valves, steam trap valve, gate globe valve

Non Return Valves