Control Valves Dealers in Jogeshwari, Mumbai

We manufacture, supply and export Chemical Flow Control Butterfly Valves of optimum quality and value. These butterfly valves are specifically designed to control flow of chemicals of different nature. Made of C. I. WCB, CF8, CF8M metals, these valves are resistant to corrosion and weatherproof. We have engineered our valves according to established guidelines, making them suitable to be used in pharmaceutical and chemical industries. Specifications :      Type : Center Disc, Eccentric Disc Size : 50mm to 1000mm Pressure Ratings : 150, 300, 600 Body Material : C. I. WCB, CF8, CF8M Operation : By Lever/Gear/Motor/Actuator Seat Material : Natural & Synthetic Rubbers Construction : Wafer, Lug, Flanged ends Disc Material : C. I. WCB, CF8, CF8M Other Function : Pneumatic or electrical actuator can be provided, gear operation provided for valves 200mm & above.

The flow control valve fittings are used to reduce the actual flow rate in a definite section of a pneumatic circuit. This serves to decrease the actuator speed of the system. While a needle valve controls the flow in two directions, a flow control valve fitting is used to direct the system flow in only one direction. This way, free flow of the gas or liquid is allowed in the opposite direction.The system has a critical need for the flow stream to reach the right place at the suitable time. The actual control of the flow and pressure, to direct the energy transfer within the system, is of secondary importance. The secondary function of the directional valves and fittings, ensure the proper timing of the cyclic events.

• Color: Black,Blue
• Number Of Way: 2way
• Automatic Grade: Manual
• Size: Available In Different Sizes
• Pattern: Plain
• Pressure: Medium Pressure
• Feature: Durable
• Finish: Coated

Fcv

Established as a dignified name, we are the celebrated organization in the market offering quality Steam Wafer Type Non Return Valve. To maintain high-quality standards, we make certain that the assortment of products is kept safe with utmost proficiency. We keep the products well stacked in order to avoid any damage.   Details : Spring closing arrangement for the prevention of reverse flow in pipelines. These valves are general-purpose valves that are stronger, lighter and smaller than conventional swing check valves and therefore, less expensive to install and maintain. Suitable for higher pressure/temperature (up to 400*C) Compact Design for simple installation between wide ranges of flange types. It can be mounted in any plane/direction. Extremely low opening pressures. Available sizes 15mm to 100mm, suitable for PN6-PN40 and ANSI 150/300. Weight and Dimension are same for class 150 & class 300 valves. Valves are self-centering type. Zero leakage for soft seated valves. The maximum permissible leakage rate shall be 3 cubic centimeters per inch of nominal pipe size for metal-seated valves. Testing - As per API 598 Design - As per manufacturers standard.   Material Of Construction : BODY : AISI 316, WCB. DISC: AISI 316 SPRING: Standard AISI 316 Spring Nimonic - for high temperature up to 400c DISC SEAT - Standard, EPDM/Nitrile, Soft seated-for water-silicon/viton soft disc seating face - for oil & gases.   General Construction : Metal to Metal seated Construction Soft seated (EPDM/Nitrile/ Silicon/viton) construction   Presure Rating : PN 40   Flange Standard : BS 10 Table D, E *& H DIN: PN6, 10 16, 25, 40 ANSI 150 and 300   Details : Opetation : Non Slam Check Valves are opened by the pressure of the fluid and closed by the spring as soon as flow ceases and before reverse flow occurs. Installation : Non Slam check valves simply fit between two pipe flanges  Standard gaskets are used on either side of the valve together with longer bolts or studs.

We offer auxillary valve. The seetru gs56 is a high quality control valve designed to handle a two-stage operation for air starting of engines. Air starting is typically used for diesel engines. The gs56 is bolted onto the air receiver vessel and integrates all the necessary functions and connections into one highly effective unit.

• Pneumatic process and control systems: ¼” to 1” BSP and NPT threads

Our Hi Line pneumatic hand and foot operated valves are available in manual return and spring return type.

• Material: Aluminum / WCB / Stainless Steel
• Size: 1 - 4 Inch
• Brand Name: TCS / Rotex

We Design, Manufacturers, supply, erection & commissioning of Cooling Towers of any capacity.we are the Supplier of spares for any make of Cooling Tower. Spares include FRP fans, GRP grids, treated timber, marine plywood, nozzle, flow control valve, gearbox etc. Spares are supplied as per OEM part number.

• Available Sizes:: 50mm to 300mm
• Temperature Rating: 20°C to 80°C
• End Connection:: Wafer Flangeless
• Testing Standard:: As per API 598.
• Design and Testing Standard:: Recommended for vertical installations only.
• Installation:: For Flanges drilled as per ANSIB 16.5, DIN 2632/2633 and BS10 Table.
• 1. Body: IS 210 Cast Iron Grade 220
• 2. Disc: Mild Steel (Epoxy Powder Coated)
• 3. Seat: Nitrile Rubber

• Color: Color and Green
• Size: Customized
• Application: Water Purifier
• Materia: Plastic

• Material: Stainless steel
• Connection Type: Thread
• Surface Type: Coated
• Inlet (mm): 65 mm
• Flanged (mm): 180 mm
• Outlet Size (mm): 50mm
• Pressure (Bar): 35Bar
• Flow Rate (L per min.): 15L per min.

ELECTRIC ACTUATED BALL VALVES, solenoid valve coils

welding clamp

Electric Wafer Knife Gate Valve, Pressure Gauge Needle Valve Flange

electric actuated ball valve, PVDF Magnetic Pump, Electrophoretic Membranes

Water Heater Relief Valve, car tool kit, spring retainer, Gas Tunnel Oven

Bellow Seal Steam, Laser Welding system, Simultaneous Hydroforming

Hydraulic Piston Pump

pneumatics systems, Instrumentation Valves

Control Valve, Threaded Nozzle, Bottom Outlet Valve, HP Angle Control Valve