Control Valves Dealers in Kalyan West, Mumbai

Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

We are counted amongst the leading Manufacturers, Exporters and Suppliers of good quality Single Piece Molded Seat Concentric Butterfly Valve. Each Single Piece Molded Seat Concentric Butterfly Valve is manufactured by using high quality raw materials. Our quality checking team checks each Single Piece Molded Seat Concentric Butterfly Valve on various criterions. The Single Piece Molded Seat Concentric Butterfly Valve is manufactured with precision. Benefits Molded-in robust seat provides bubble-tight shutoff to 150 psi.Cast-in top plate is an essential part of the body and is standardized to allow direct mounting of all actuators.Long-drawn-out neck allows adequate clearance for flanges and insulation.Round, polished disc and hub edge provides 360 degree concentric seating, minimum flow restriction, lower torques and longer seat life. It is offered in two body styles: wafer and lug. The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.Thru-stem design provides high strength and positive disc control with standardized end connection for operator interchangeability.Bi-directional, self-adjusting stem seal, located in the upper journal, is suitable for vacuum and pressure while also preventing external contamination of the stem area.Each valve is factory tested to 110 percent of specified pressure rating. Minimum Order Quantity : 2 Units Material Shell : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless SteelTrim : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel Range Size Range : 2" - 72" Class : PN 6/PN 10/PN 16/Class 150 Types : End Connection - Flanged / Lug / Wafer Operation : Lever, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic Download

• Material: Stainless Steel
• Feature: Blow-Out-Proof, Casting Approved
• Valve Size: 1/2inch, 1/4inch, 1inch, 2inch
• Pressure: 1.0Mpa
• Finish Type: Polished
• Technic: Hot Rolled
• Temperature: 0 degree celsius to +70 degree Celsius

  Nirmal has established itself as an expert in control valve solutions required for services such as manufacturing; in the field of self-actuated pressure control valves, low -pressure nitrogen blanketing systems, reduction in gas pressure with safety shut off & metering skids

The CGV Series control valves are suitable for handling steam and water. The valve body is designed for smooth flow profile, which minimizes pressure loss and provides better Cv and rangeability.

The CGV Series control valves are suitable for handling steam and water. The valve body is designed for smooth flow profile, which minimizes pressure loss and provides better Cv and rangeability.

Features and Benefits Line pressure driven - Independent operation Hydraulic flow sensor (upstream installation) In-line serviceable - Easy maintenance Double chamber design Flexible design - Easy addition of features

• Packaging Type: Box
• Voltage: 220-240 V
• Brand: Chemtrols
• Usage/Application: Water

Application Rotolock valves are Compatible with all CFC, HCFC and HFC Refrigerants, mineral oils, Alkyl Benzene, POE lubricants and Industrial fluids non-corrosive to steel and brass. (With suitable Gland/Seal). Materials of construction Valve Body: Hot Forged Brass (BS-218). Rotolock sleeve: Hot Forged Brass (BS-218). Rotolock Nut: Hot Forged Brass (BS-218). Spindle: Stainless Steel 304. Gland Nut: Free cutting Brass Gland Packing: Graphite and Neoprene Seal Cap: Plated steel / ABS Seat : Stainless Steel 304 Rotolock Gasket: Teflon Springs: SS 304 Solder: Silver solder 42%   Design Forged Brass body and parts with SS 304 internal components minimize chances of corrosion in all conditions and allow easy brazing with copper tubes. All ports are integrally forged and the only brazed joint is the rotolock sleeve. This minimizes chances of leakage. Brass body and SS 304 floating internal seat allow metal to metal seating on dissimilar metals resulting in positive isolation and virtually lifelong durability. Stem with full back seating and graphite and neoprene seals allow gland packing to be changed in open position and brazing without disassembling the valve. No coatings are used on the Valve and internal parts. Graphite, Neoprene and Teflon seals are available as standard accessories. Operation & Testing. Maximum working pressure 450 psig. Working Temperature Range: (-30°C + 100°C). Individual pneumatic Testing in Open/Close position at 450 psig. Valves suitable for operation at 650 psig can also be provided on request.

By virtue of their Y-type configuration, AIL Globe Valves have a relatively straight flow and a lower pressure drop compared to conventional globe valves. The valves are suitable for tight shutoff and throttling in high pressure and high temperature lines. Some of the unique features of AIL Y-Globe Valves are : Pressure Seal Bonnet Low operating torque due to use of thrust bearings Non-rotating stem Integrally-stellited body seats Fully-guided disc with Stellite seating and guiding surface Impactor handwheel in sizes of 6” (150mm) and above

• Material: Carbon Steeel, Metal, PP, PVC, Stainless Steel, UPVC
• Color: Black, Blue, Red, Sky Blue, White
• Automatic Grade: Automatic, Manual
• Number Of Way: 2way, 3way, 4way
• Size: 1inch, 2inch, 3inch, 4inch, 5inch, 6inch, 7inch
• Type: Flow Control Valves
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Anti Dust, Blow-Out-Proof, Casting Approved, Durable, Investment Casting, Light Weight, Non Breakable

• BODY: GM IS:318,LTB 2
• SPINDLE: BRASS IS:319
• BONNET: GM IS:318,LTB 2
• GLAND BUSH: GM IS:318,LTB 2
• GLAND PACKING: ASBESTOSE ROPE

GLAND NUT : GM IS:318,LTB 2 CHECK NUT (SPINDLE) : GM IS:318,LTB 2 SEAT WASHER : RUBBER IS:937 STOP VALVE : GM IS:318,LTB 2 SEAT CHECK NUT : GM IS:318,LTB 2 HEX. NUT : M.S. HAND WHEEL : CI. IS:210 FEMALE OUTLET : GM IS:318,LTB 2 LOWER LUG : GM IS:318,LTB 2 UPPER LUG : GM IS:318,LTB 2 BLANK CAP : PVC RUBBER RING : RUBBER IS:937 CAM TOOTH : GM IS:318,LTB 2 SPRING : IS:7608 CHAIN : GALVANIZED

All the items are manufactured as per customer specification of MOC, range and operating condition in as per Sigma’s standard design and engineering practice.

Model : DV series     Flow control valves are widely used range in industries and as named they are applied in controlling of flow. This range is available in high pressure rating and through knob rotation we can control the flow of media as per required. On knob, we have label to indicate the flow and hence accuracy of flow can be achieved. Locking system is arranged to lock the valve so no auto tuning is occurred. As named this valves are manufactured without facility of inbuilt check valve. This causes free reverse pressure possibilities.     Features   700bar operating pressure Temp. rating 20°C to 250°C 1/8" - 1 1/2" BSP and NPT End Connections Flows to 80 gpm Carbon steel housing FPM (Viton®) O-rings (standard) Graduated knob and color spindle for accurate flow control Provision for panel mounting

We present the clients with top quality Y Type Globe Valves, which are used in diverse industrial applications. The Y Type Globe Valves are meticulously engineered for durability and effectual performance. Our range of Y Type Globe Valves undergoes stringent quality control measures to make the products free from all drawbacks.Specifications Design : API 602/BS 5352 Testing : API598/BS 6755 Part I Material : ASTM Specifications Moulded pre-compressed graphite ring packing varieties of trim combination Optional Features Alternate investment cast valves in ss. Welded on flanged ends Seal welded bonnet, extended bonnet and bellow sealed bonnet Used In Chemical process Petrochemical plants Power generation sectors

We are a leading manufacturer and supplier of Single Hydrant Valve in Mumbai

electrical actuator valves, Motorized Butterfly Valve

process control valves, Pneumatic Cylinders, Hydraulic Cylinders, Power Pack

Flow Control Valves, Ball Valves, PVC Pipes, Hydraulic Cylinders

Control Valves, Rubber Bladders, Rubber Foam, Rubber Gaskets

self actuated pressure control valves, Pressure Regulators

Flow Control Valves, straight pipe, Splits Flanges, Tube to Flange

Control Valves, Hydraulic Presses, High Pressure Pumps

steam trap valve, Ball Valve, Safety Valves, stream trap valves

seat valve, caterpillar parts, Connecting Rod Bearing

steam trap valve, Ball Valve, Swing Check Valve, Lift Type Check Valve

Hydraulic Mobile Control Valve, Paper Roll Clamp, Bale Clamp

Single Seated Control Valve