Check Valves Dealers in Jogeshwari, Mumbai

Available in SS316, all wetted parts in accordance with NACE MR01-75 Heat Code Traceable to certified material test report Instant shut off in upstream condition The cracking pressure from 1 to 25 psig (0.07 to 1.8 bar) Variety of end configurations includes Male NPT, BSPT and BSPP pipe connection Available Fractional Size : 18" to 1" Tube OD Metric Size : 3 mm to 25 mm Tube OD 18" to 1" Pipe Thread Every valve is factory tested

• Overall Length: 6-10 Inch
• Specialities: Durable
• Type: Industrial Valves
• Material: Cast Iron / Stainless Steel
• Color: Golden
• Finishing: Coated
• Usage: Water Fitting

Industrial valves are devices that are used to regulate liquids, gases, and slurries. The flow of liquids or gases can be controlled using these valves. This can be done through pipes and other passageways by opening, closing, and partially obstructing the passageway or pipe.

• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch
• Material: Carbon Steeel, Stainless Steel
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: Silver
• Automatic Grade: Automatic
• Pressure: High Pressure, Medium Pressure
• Feature: Blow-Out-Proof, Casting Approved, Durable, Easy Maintenance.
• Type: Valve
• Pattern: Plain

Specifically designed flow control of fluids and gases in corrosive and hazardous environment, we Manufacture and Supply high quality Check Valves. Precisely fabricated using up-to-date technology, we make sure that Check Valve is durable and provide maximum efficiency. Used in process control, instrumentation and flow control applications, these are low cost alternatives in fluid and gaseous control systems. Timely delivery of all orders and competitive prices are our priorities.   Features Available in High Grade Stainless Steel, Bass materials Variety of end connections includes Male / Female threaded NPT, BSP, BSPT, ISO, DIN and JIS tapered pipe ends. 100% factory tested for both crack & reseal Complete Heat Traceability   Pressure / Temperature Ratings : Pressure Rating 316SS – 1/8” to 3/4"- 5000 psig CWP (345 bar) 1” – 3000 psig CWP (207 bar) Brass – 1/8” to 1” – 3000 psig CWP (207 bar Working Temperatures Viton seal -15o F to 375° F (-26oC to 190oC) Fluorocarbon Rubber -15oF to 400° F (-26oC to 204oC) Buna – N Rubbe -30o F to 275oF (-34oC to 135oC) Neoprene Rubber -45o F to 250o F (-43oC to 121oC) Orifice : 1.078” to 0.656” (2.0 mm to 16.7 mm) Cv Factor : 0.18 to 6.56 Working : Choice of fixed pressure cracking points from 1/3 to 25 psi (.02 to 1.75 bar ) or as per customers requirements. Valves may initially crack at higher than subsequent cracking pressure if are not actuated for a period of time

• Size: 2 inch
• Material: Stainless Steel
• Surface Finish: Polished
• Automation Grade: Manual
• Media: Water
• Country of Origin: Made in India
• Technique: Hot Rolled

Forged Steel Non Return Valves are engineered using alloy, aluminum, nickel and other requisite metals in accordance to the design and manufacturing standard-API 602 (Gate) BS 5352. These valves are designed keeping in mind their role in industries, like petrochemical, sugar, chemicals and others. We offer valves in different sizes and specifications to cater to the diverse demands of the clients.

Aquaseal: Integrally-moulded Butterfly Valve in PN 10 Aquaseal - PN 10 – Wafer Type – Size 2”-24”   Aquaseal: Integrally-moulded Butterfly Valve in PN 16 Wafer Type – Size 2”- 24” Lugged Type – Size 2”- 24” Flanged Type- Size 6”- 36”   Aquaseal Plus - Integrally-moulded Butterfly Valve - Class 150 Wafer Type – Size 2”- 24” Lugged Type – Size 2”- 24” Flanged Type- Size 6”- 36”   Aquaseal 25 - Integrally-moulded Butterfly Valve – PN 25   For More Details Please Click Here.   Aquaseal Max - Large-size Fabricated Steel Butterfly Valve   For More Details Please Click Here.   Aquaseal Chek – Dual-Plate (Wafer Type) PN10 – Size 2”- 8” PN16 – Size 2”- 8” Class 125 – Size 2”- 8”   Aquaseal FabChek ( Fabricated Steel Check Valve) PN6 – Size upto 120” PN10 – Size upto 120” PN16 – Size upto 120”   For More Details Please Click Here.

• Country of Origin: Made in India
• Material: Stainless Steel
• Valve Size: 1.5 Inch
• End Connection: Screw
• Specialities: Thermal stability, Compact design, High strength, Robust construction
• Material Grade: SS 304,316
• I Deal In: New Only
• Pressure: High low & Medium
• Automation Grade: Automatic

• Size range: ½” to 4”
• Material of Construction: SS 304 / 316
• End Connections: TC

Ambika has designed spring-assisted check valve (Sanitary NRV) for Vertical mounting to prevent flow reversal in industries. The internal surface finish is 0.8 Ra while the disc and seat are lapped to provide excellent shutoff. The specially designed end connection is easy for mounting and dismounting and so it is comfortable for maintenance and less time consuming. Additionally body and seat, is fastened with a quick release clamp and elastomeric body seal to permit fast and easy access to the internals.   Principle of operation   In line spring assisted NRV is designed to prevent reversal of flow with strict clean condition. The valve opens whenever the pressure below the plug exceeds the pressure above the plug due to spring and higher counter pressure will press the plunger valve against the seat to close the valve.   Features and Specialities • Fully drainable in vertical / horizontal installation • TC end connection as per ASME BPE standard. • 3a standard • Material traceability certificate for components and elastomers ( FDA approved ) used in check valves. ( on request ) • Capable to withstand CIP at 80deg0   SIP at 123deg0    • Internal surface finish o.8ra. • Spring assisted silent closing. • Cracking pressure from 10 – 20 mbar ( on request ) • Metal to metal seat class 4 shut off / Soft seated sealing  • This NRVs are made completely from bar stock, Non-magnetic.

• Brand Name: Danfoss
• Certification: ISO 9001:2008 Certified
• Packaging Type: Box
• Type: Differential Pressure Switch
• Corrosion Resistance: Yes
• Ce Conformity: Yes
• Media Type: Gas
• Rust Proof: Yes

  DANFOSS INDUSTRIAL REFRIGERATION SHUTOFF REGULTATING VALVES SVA, STC, REG, SNV-ST, QDV CHECK VALVE SCA/SCA-X, CHV/CHV-X, NRVA SAFETY VALVE SFA, SFV, POV, DSV LIQUID LEVEL REGULATING VALVES HF1, SSV1/3, SV4/5/6, PMFL, PMFH SOLENOID VALVES EVRA/EVRAT, EVRS/EVRST, ICLX, ICSH, BV1/2, GPLX, GPS, PML, PMLX PRESSURE & TEMPERATURE REGULATOR ICS, ICM/ICAD, CVP, CVC, CVT, EVM, PM, ICV, MEV, MRV, PMC, ORV, OFV, CVMD VALVE STATION ICF SERIES STRAINERS FIA, FA, FIL, DCR SWITCHES & THERMOSTAT RT, KP, MP SERIES, AKS SIGHT GLASSES LLG SERIES SENSOR AKS4100/U, GDA, GDC, GDHC, GDHF, GDH EXPANSION VALVE TEA, TEAT, TEVA, TEAQ, AKVA

• Material: Metal
• Color: Blue
• Condition: New
• End Connection: Screwed
• Size: Available In Different Sizes
• Pressure: Medium
• Feature: Durable
• Finish: Coated

Nrv

Cast Check Valves are designed and developed in accordance with various international industrial standards. They are manufactured from the finest quality components and under precise direction of experienced quality controllers. One can avail these in various materials, dimensions, ranges, sizes and other specifications as per their precise demands and requirements. Cast Check Valvesare one of the most preferred selections for clients owing to its precise design, accurate dimensions and longer service life.  

• Material: Rubber
• Color: Red
• Shape: Round
• Diameter: Upto 4 inch

• Pressure Rating: Up to 70Mpa
• Size Range: DN50 – DN800
• Temperature Range: Up to 800°C
• Connections: Flange
• Body Material: WCB, Stainless Steel
• Operating: gear box, electric actuator, fuid drive, Pnumatic drive

Suitable fuid Quartz, Ganister, Aluminum,Coal, Mortar, Taillings

• Feature: Easy to fit, Durable, Corrosion resistant

Alarm Check Valve serves as a check valve by trapping pressurized water above the clapper and preventing reverse flow from sprinkler piping. The valve is designed to initiate an alarm during a sustained flow of water (such as the flow required by an open sprinkler) by operating an optional water motor alarm and/or alarm pressure switch. These too have a universal approval from LPCB, FM Global, Underwriters Laboratories and etc.   Specifications Material: Ductile Iron Pressure: 300psi End Connections: Flanged/Grooved Sizes: 200NB, 150NB, 100NB, 80NB Approvals: UL&FM

• Available Sizes:: 50mm to 300mm
• Temperature Rating: 20°C to 80°C
• End Connection:: Wafer Flangeless
• Testing Standard:: As per API 598.
• Design and Testing Standard:: Recommended for vertical installations only.
• Installation:: For Flanges drilled as per ANSIB 16.5, DIN 2632/2633 and BS10 Table.
• 1. Body: IS 210 Cast Iron Grade 220
• 2. Disc: Mild Steel (Epoxy Powder Coated)
• 3. Seat: Nitrile Rubber

Features : check  valves  are  used  for  controllng  flow  in  one direction  only. Check  valves  should  never  be used  as  code  safety  relief  devices.   Note : End  connections  available  in  NPT;  BSPT  ; Tube size; BSPP 100% valve are factory tested prios to despatch. Pressure range from 1,000 to 10,000 psi.

FEATURES  Available in SS316, all wetted parts in accordance with NACE    MR01-75•  Heat Code Traceable to certified material test report•  Instant shut off in upstream condition•  The cracking pressure from 1 to 25 psig (0.07 to 1.8 bar)•  Variety of end configurations includes SEALEXCEL®     Well-Lok™  Tube Fittings, Male/Female NPT, BSPT and BSPP     pipe connection•  Every valve is factory tested OPERATING PARAMETERS Pressure Rating           : upto 3000 psig (205 bar) at CWPTemperature Rating   : upto 198ºC with Viton®O-Ring APPLICATIONS •  Gas•  Liquid •  Fluid handling

Body Materials: SS 316, SS 316L, SS 321, Duplex 2205, Titanium, Alloy 400, Alloy 625, Alloy C-276. Maximum Pressure Rating: 6000psig (414 bar). Temperature Rating: -54°C (-65°F) to 482°C (900°F). End Connection: 1/8″ to 1″ and M14 to M27 thread, 1/8″ to 1″ and 3mm to 25mm tube fitting.

Check  valves  are  used  for  controllng  flow  in  one diretion  only. Check  valves  should  never  be used  as  code  safety  relief  devices. Note : End  connections  available  in  NPT;  BSPT  ; Tube size; BSPP 100%  valve  are  factory  tested  prior to  despatch Pressure range from 1,000 to 10,000 psi. Cracking pressure 1 psi to 25 psi.