Check Valves Dealers in Kurla, Mumbai

• Type: Audco Valves
• Material: Cast Steel, Stainless Steel
• Application: Industrial
• Condition: Good
• Pressure: High Pressure, Low Pressure, Medium Pressure

we are offering audco cast steel gate globe check valves. gate valves are of flexible wedge, outside screw-and-yoke and bolted-bonnet construction. The valves conform to api 600iso 10434.globe valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnet construction. They conform to bs 1873 and also meet the general requirements of api 600, including shell wall thickness and stuffing box dimensions.check valves are of swing-type and bolted-cover construction. They conform to bs 1868 and also meet the general requirements of api 600, including shell wall thickness.

• Material: Stainless Steel
• Feature: Blow-Out-Proof, Casting Approved
• Pressure: Medium Pressure
• Size: 1/2 inch
• Media: Air, Water, Gas
• End Connection: Screwed
• Material Grade: SS304

We manufacture a wide range of Forged Steel Gate Valves that are used in different industries, mainly in high pressure or high temperature pipe line  

We are one-stop-shop from where you can browse wide range of industrial Check Valves under single roof named as Eco Engg. We are one of the leading wholesale check valves suppliers, located in India. We aim to provide superior quality products at the most rock bottom price.

We bring forth Wafer Type Check Valves that are known for high efficiency and long life among the buyers. The Wafer Type Check Valves can be used on various types of fluid. Wafer Type Check Valves can be accessed in different specifications to fulfill the demands of the clients.Specifications Manufacturing Standard : API 6D/API/ASME B 16.3 Face To Face : API 6D/API 598 Material : ASTM Specifications soft seat for tight shut-off, lesser weight, smaller size and lesser force to open Optional Feature Replacement of conventional check Salient Features Low maintenance cost High efficiency Longer working life Corrosion resistant

  Model : NRV series     As named these valves has application of creating flow in one direction. While if the flow is in reverse direction the valve does not allow the flow. They are also known as Check Valves. In hydraulic field high pressure NRV is very essential. This has benefit by elimination of back pressure. These are manufactured from single bar stock to avoid failure of valves.     Features   700bar operating pressure Temp. rating 20°C to 250°C 1/8" - 2" Eliminates Back Pressure BSP and NPT End connections Flows to 80 gpm Carbon steel housing FPM (Viton®) O-rings (standard)

With the help of our highly skilled and well talented personnel, we are able to manufacture and Forged Steel Gate Valve. Used primarily in high pressure or high temperature pipe lines, offered valves are available in different options of size, class, valve seat, and testing standards.

A] Air Compressor - Spare Parts 1] INGERSOLL-RAND :- [ IR- T-30 SS NL LPG Series ] 2] INGERSOLL-RAND :- [IR- ESV ESH IHE PHE LLE HSE XLE- Series ] 3] ELGI Compressors : - [ ELGI- SC TC THPC HV SS TS HP Series ] B] Other Air Compressors- Spare Parts 1] FOUJI :- [ FOUJI- MB SMB FI FID MBD ] 2] AIR-MARSHAL :- [AIR- MARSHAL- GC-305V , GC-294 , GC-7150 , GC-2595 ] 3] BOSS :- [ BOSS- MB SS SD ST TD TT HT HP ] 4] INDO-AIR :- [INDO-AIR- IA IAV ] 5] JK PNEUM :- [JK PNEUM- 25S , 50S , 75L , 100L , 75H , 150H ] 6] PARKEEN :- [ PARKEEN- SA SB SF SS SV TCA TCB TCI TCK ] 7] PNEUMECH :- [ PNEUMECH- PM PMF ] 8] ZEN AIR :- [ ZEN- 75H 150HH 75L 125L 25S 50S ] C] Screw Compressor - Spare Parts 1] Ingersoll-Rand ELGI Atlas - Copco CP Kirloskar Khosla Kaser Sullair Boge D] Refrigeration Chilling Compressor - Spare Parts 1] Accel Sabroe Carrier Voltas Grasso Kirloskar Stal Thermoking Trane Vilter All the Models Refrigeration Chilling Compressor Spare Parts E] Marine Compressor - Spare Parts 1] Sperre Tanabe Hatlapa Hamworthy All the Models Marine Compressor Spare Parts We do Export our product to Asian countries, Middle East, America, Canada, Europe etc. Countries. We aim to explore new avenues and conquer new frontiers.

Check valve is designed to prevent backflow. Fluid flow in the desired direction opens the valve, while backflow forces the valve closed.

• Features: For subplate mounting, Subplates to data sheet RE 45062 (separate order), For threaded connections, 4 opening pressures

• Type: Swagelok type
• Brand Name: Trimurti Engineers
• Material: SS as per client
• Pressure: 1000 to 10000

Hi-Pressure Instrumentation Valves Fittings & Hydro pneumatic accessories.

Check Valves or non-return valve, allows the fluid to pass in one direction only. A ball check valve is a check valve in which the closing member, the movable part to block the flow, is a spherical ball. In some ball check valves, the ball is spring-loaded to help keep it shut. A diaphragm check valve uses a flexing rubber diaphragm positioned to create a normally-closed valve. Pressure on the upstream side must be greater than the pressure on the downstream side by a certain amount, known as the pressure differential, for the check valve to open allowing flow. Once positive pressure stops, the diaphragm automatically flexes back to its original closed position. A swing check valve or tilting disc check valve is check valve in which the disc, the movable part to block the flow, swings on a hinge or trunnion, either onto the seat to block reverse flow or off the seat to allow forward flow. The seat opening cross-section may be perpendicular to the centerline between the two ports or at an angle. Although swing check valves can come in various sizes, large check valves are often swing check valves. A stop-check valve is a check valve with override control to stop flow regardless of flow direction or pressure. In addition to closing in response to backflow or insufficient forward pressure (normal check-valve behavior), it can also be deliberately shut by an external mechanism, thereby preventing any flow regardless of forward pressure. A lift-check valve is a check valve in which the disc, sometimes called a lift, can be lifted up off its seat by higher pressure of inlet or upstream fluid to allow flow to the outlet or downstream side. A guide keeps motion of the disc on a vertical line, so the valve can later reseat properly. When the pressure is no longer higher, gravity or higher downstream pressure will cause the disc to lower onto its seat, shutting the valve to stop reverse flow.

• Country of Origin: Made in India
• Automatic Grade: Manual
• Warranty: One year
• I Deal In: New Only
• End Connection: Flanged
• Valve Size: 2"

• Size: 1 1/2" (40 mm) to 12" (300 mm)
• Material: Stainless Steel
• Rating: PN-10/PN-16

We offer Disc Check Valve. Disc Check Valves are recommended after traps discharging into closed systems to guarantee Non return or no reverse flow. These check valves can be mounted between pipe flanges in any direction. DCVs feature a compact and rugged stainless steel design and are suitable for any process liquid & gas, apart from steam. Disc Check Valves are designed to be sandwiched between flanges i.e. Wafer type. They are suitable for use on a wide range of fluids for applications in process lines, hot water systems, steam and condensate systems etc. Face-to-face dimensions conform to EN 558 part 2, series 52. •As standard it will be supplied with a metal-to-metal seat for use on steam applications. Springs are suitable for high temperatures up to 400°C. •MOC: ASTM A 351 Gr. CF8M •Sizes: 15mm to 150mm •Pressure: #150 and #300 •IBR IF REQUIRED

BODY : SS:304/SS IS:3444 Gr. 1 SPINDLE : SS IS:6603 BONNET : SS:304/SS IS:3444 Gr. 1 GLAND BUSH : SS:304/SS IS:3444 Gr. 1 GLAND PACKING : ASBESTOSE ROPE GLAND NUT : SS:304/SS IS:3444 Gr. 1 CHECK NUT (SPINDLE) : SS:304/SS IS:3444 Gr. 1 SEAT WASHER : RUBBER IS:937 STOP VALVE :SS:304/SS IS:3444 Gr. 1 SEAT CHECK NUT : SS:304/SS IS:3444 Gr. 1 HEX. NUT : M.S. HAND WHEEL : CI. IS:210 FEMALE OUTLET : SS:304/SS IS:3444 Gr. 1 LOWER LUG : SS:304/SS IS:3444 Gr. 1 UPPER LUG : SS:304/SS IS:3444 Gr. 1 BLANK CAP : S.S./PVC RUBBER RING : RUBBER IS:937 CAM TOOTH : SS:304/SS IS:3444 Gr. 1 SPRING : SS IS:6528 CHAIN : GALVANIZED

• Brand Name: Honeytech
• Valve Size: 1/4 inch, 1/2 inch
• Media: Hydraulic Fluid
• Pressure: 10 kg/cm2
• Structure: M Type With Box Coil With Wire Lead Or Pic
• Model Number: B63024

• End Connection: Wafer Flange less
• Temperature Rating: 20 degree C to 80 degree C
• Features: Corrosion-resistance, Ruggedness ,Fine finish.
• Size: 50 mm to 300 mm
• Installation: For Flanges drilled as per ANSIB 16.5, DIN 2632/2633 and BS10 Table
• Design and Testing Standard: Recommended for vertical installations only
• Testing Standard: As per API 598

We are a leading manufacturer and supplier of Double Hydrant System in Mumbai

We are leading supplier of huge range of Check Valves.

Non Return Valves, Globe Valves, Butterfly Valves, Ball Valves

Air Disc Valves, Slot Air Diffuser, Square Air Diffuser, Control Damper

Vertical Check Valve, Centre Hole Basin Mixer, Angular Stop Cock

Check Valve, stainers, Sluice Valve, Safety Relief Valve

Check Valve, Safety Valves, stream trap valves, Globe Valves, Ball Valves

nrv valve, Gate Valve

Non Return Valve, Gate Valve, flanged design valve

Foot Valve, Gun Metal Valves, Hydrant Valve, Gate Valve, Non Return Valve