Check Valves Dealers in Mahim, Mumbai

• Size: 15 to 80 NB
• Pressure: 17. 50 kg/cm�
• Temperature: 200� c
• Body: Bronze
• Ends: flanged end

World's Largest Global Steel & Engineering Valve Factory is a India-leading manufacturer of industrial Bronze Controllable Feed Check, offers with High Durability at Special Prices. Mainly Supply Bronze Controllable Feed Check, Learn more about our Bronze Controllable Feed Check for general-industry & Find Information On Multi Range Industrial Bronze Controllable Feed Check.

ast Steel Bolted Cover Check Valve   Micon Valves cast steel bolted cover check valves are renewable seat ring and body mounted disc swing type. Swing check valves are designed and tested in accordance with ASME, British Standard & API, BSEN. Installation dimension comply with ASME. Micon Valves is able to apply any other standard specified by the customers.Cast steel swing check valves are available in wide range of sizes and pressure. Swing check valves are single direction flow valves used to allow unlimited flow in one direction & to restrain flow in the opposite direction. Valves are best suited for moderate velocity applications & normally designed for installation in horizontal lines. Special features like counter weight, hydraulic cylinder and other features are available on request. Materials: Carbon Steels, Austenitic Stainless Steels, Martensitic Steels, Duplex Stainless Steels, Super Duplex Stainless Steels, Nickel-Alloys and CRA Overlays.

• Material: Stainless Steel ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351

• Model Number: IN0200
• Material: Stainless Steel
• Condition: New
• Brand Name: KE
• Power Source: Hydraulic

        R & D Multiple’s Dual Plate Check Valves combine the best features with top class workmanship making them unique for any kind of waterworks applications. The clamped resilient seat on Body is a feature which combines high seal integrity & assurance against seal wash-off. Independent spring action for each plate ensures that the spring twist is half compared to the conventional designs. This greatly enhances the life of the springs. Considering features as above & many others, R & D Multiple’s Dual Plate Check Valves will give you the best in areas of Features, Workmanship, Initial & running costs. This is the best choice.       SALIENT FEATURES :       Clamped Resilient seal on valve Body. This seal is replaceable on site. Independent  spring action for each plate. The pins are precisely & permanently centered in the valve body. The shock dampers ensure that there is no undue load on the Stop Pin & that the spring twist also is maintained in limit. ‘Heeling effect’ for the plates provided to avoid rubbing of the seats near closure. Wide choice of materials of construction available: Shell: C.I./S.G.I./WCB/ S.S./ D2:   Seats: Rubber with S.S. / S.S. with S.S., pins: S.S. Size Range: 50mm to 3000mm, Pressure Ratings: 6/10/16/24 Bar. (Class 150/ Class125) End connections: Flanged / Wafer/ Lug Wafer.       SPECIAL FEATURES :       Independent support also ensures that each of the plates revolves from full close to full open & reverse with-out bearing on each other.  Large & hydrodynamic flow passages ensure minimum pressure drop. ‘Low Torque’, ‘Standard Torque’ & ‘High Torque’ spring options available depending upon site parameters.

Air valves offer a simple yet effective means of providing supply and extract air for most commercial, industrial and domestic ventilation applications. The disc valves consist of a valve ring, central disc and installation sub frame. COSMOS disc valves are best suited to air distribution system handling relatively low air flow rates within small circular ductwork. Disc valves are Ideal for handling exhaust of greasy and damp areas like kitchen, restroom etc. They can be use for ventilation as well as supply applications. The air volume flow rate is adjusted by rotating the central disc which alters the size of the gap. This results in changes to acoustic and pressure drop figure. The central disc is held in position with a locknut.

R & D Multiple’s Dual Plate Check Valves combine the best features with top class workmanship making them unique for any kind of waterworks applications. The clamped resilient seat on Body is a feature which combines high seal integrity & assurance against seal wash-off. Independent spring action for each plate ensures that the spring twist is half compared to the conventional designs. This greatly enhances the life of the springs. Considering features as above & many others, R & D Multiple’s Dual Plate Check Valves will give you the best in areas of Features, Workmanship, Initial & running costs. This is the best choice. SALIENT FEATURES : Clamped Resilient seal on valve Body. This seal is replaceable on site. Independent spring action for each plate. The pins are precisely & permanently centered in the valve body. The shock dampers ensure that there is no undue load on the Stop Pin & that the spring twist also is maintained in limit. ‘Heeling effect’ for the plates provided to avoid rubbing of the seats near closure. Wide choice of materials of construction available: Shell: C.I.S.G.I.WCB S.S. D2: Seats: Rubber with S.S. S.S. with S.S., pins: S.S. Size Range: 50mm to 3000mm, Pressure Ratings: 6101624 Bar. (Class 150 Class125) End connections: Flanged Wafer Lug Wafer.

• Size: ALL
• Certification: ISO
• Material: Stainless Steel, Titanium
• Application: check valves for the oil, gas, chemical, naval and wastewater treatment industries.
• Media: Powder/Solids, Water, Gas, Air, Fuel
• Pressure: as per requirment
• Material Grade: Titanium
• Power Source: Hydraulic
• Brand Name: KE
• I deal in: New Only

• Connections: Process: Flange as per ANSI B16.5, Instrument:1/2 NPT (F) Drain / Vent:1/4 NPT (F)
• Gland Packing: PTFE: Standard,GRAPHOIL: Temperatures above 200°C

Block & bleed assemblies for primary isolation of pressure take-offs, where the valve is directly mounted to the vessel or process pipe. Instruments may be directly mounted to the valve outlet or alternatively remotely mounted with gauge line impulse pipe line.

• Brand Name: EXCEL
• Material: As per customer’s Requirement
• Place of Origin: INDIA
• Pressure: As per customer’s Requirement

We are engaged in manufacturers and exporters of a wide range of check valves . Our products are manufactured as per the national as well as international quality standards. Our valves are largely admired for working pressure : upto 6, 000 - 10,000 psi. Size: various in screwed ends, socket weld ends, tube od ends. Further, these products have numerous usages in various industries. Besides this, we also provide customized service in varied specifications and in accordance with the client demands. Specifications :- · designed for uni-directional flow of fluids and gases check valve size with end connection · npt, bspt and odt. · material construction: s.s.304.s.s.316,carbon steel n ( cs ) and brass · testing: 100% tested for crack and reseal performance features: · optimum construction · dimensional accuracy · protection against corrosion · high efficiency

Timely delivery is our forte as we have up-to-date transit facilities and logistic services. In order to ensure zero damage during transit, we have adopted modern facility for meticulously packaging our offerings. And, we also ensure that the used material is of high quality.

• Size Range: 15mm to 250mm.

3-way,4-way,Partial Jacketed, Fully Jacketed, Cage Control, Sampling, Gear operated, Actuator Operated. CS SS304 SS316 WCB CF8 CF8M & Higher Alloys on request, Flanged, Screwed, Socket weld, Butt weld.

Mighty Mounts Disc Valve Suitable for rooms that are enclosed spaces; rooms without direct exhaust. Diameter 100, 150 & 200 mm (4″ , 6″ & 8″). Manufactured from white polypropylene (RAL9010); heat resistant to 100 C. Variable air flow control. No leakage between valve body & mounting frame. Simple removal for cleaning. For mounting in places with small spaces, a clamping ring is added.

• Available Design: Vertical, Horizontal, Wafer, Dual Plate, Swing Check Valve
• End Connection Type: Screwed, Flanged
• Available Material: GM, CI, CS, SS

• Material: Stainless Steel
• Certification: ISI Certified
• Application: Industrial
• Color: Grey
• Pressure: High Pressure
• End Connection: Flanged, Screwed
• Type: Single

• Color: Silver
• Material: Metal, Stainless Steel
• Type: Check Valves
• Condition: New
• Pattern: Plain
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pressure: High Pressure

Cease Fire XT are offering a precision-engineered range of Double Landing Valve/ Stainless Steel (Type -B) to our valued clients.

Protection against Reverse Flow Minimal Flow direction Changes Tilting Disc Spring-loaded Disc

Our company is renowned as one of the leading Foot Brake Valve Manufacturers in India. The Auto Foot Brake Valve offered by us well suited for various European, American & Japanese Vehicles. The Air Foot Brake Valve is also widely demanded in the market due to the unmatched quality and unbeatable performance.

• Material: Cast Iron
• Country of Origin: Made in India
• Brand: Hani Enterprises
• Media: Water
• Automation Grade: Manual
• Packaging Type: Box
• Usage/Application: Industrial