Check Valves Dealers in Mulund East, Mumbai

Design :   API 6D / API 594 / ASME B 16.34 Face To Face :   API 6D / API 594Testing :   API 6D / API 598Material :   ASTM SpecificationsTrims :   Varities of combinationsSoft seat for tight shut-off.Lesser weight, smaller size and lesser force to open.Optional:   Replacement of conventional check valves without Pipeline modification.

We are leading supplier of huge range of Check Valves.

BODY : SS:304/SS IS:3444 Gr. 1 SPINDLE : SS IS:6603 BONNET : SS:304/SS IS:3444 Gr. 1 GLAND BUSH : SS:304/SS IS:3444 Gr. 1 GLAND PACKING : ASBESTOSE ROPE GLAND NUT : SS:304/SS IS:3444 Gr. 1 CHECK NUT (SPINDLE) : SS:304/SS IS:3444 Gr. 1 SEAT WASHER : RUBBER IS:937 STOP VALVE :SS:304/SS IS:3444 Gr. 1 SEAT CHECK NUT : SS:304/SS IS:3444 Gr. 1 HEX. NUT : M.S. HAND WHEEL : CI. IS:210 FEMALE OUTLET : SS:304/SS IS:3444 Gr. 1 LOWER LUG : SS:304/SS IS:3444 Gr. 1 UPPER LUG : SS:304/SS IS:3444 Gr. 1 BLANK CAP : S.S./PVC RUBBER RING : RUBBER IS:937 CAM TOOTH : SS:304/SS IS:3444 Gr. 1 SPRING : SS IS:6528 CHAIN : GALVANIZED

Double Flap Valve allows material to flow, while preventing the back flow of air or gas that is critical in many conveying systems. These devices are commonly used wherever dry solids need to be moved between areas of differing air pressure, including ash handling. Typical Double Flap Valve equipment applications include drop-out box hoppers, Dust Collectors, Bag Houses, Precipitators and screw conveyors. Double Flap Valves can handle material like Fly Ash, Sawdust, Lime, Cement, Clinker, Sinter and sand. Other types of material can be collected as long as they are granular, not sticky and flow freely by gravity. This Flap Valve can be motorized, pneumatic & gravity operated.

• Size: 2inch
• Material: Carbon Steeel
• Color: Red
• Pattern: Plain
• Automatic Grade: Automatic
• Pressure: High Pressure
• Feature: Blow-Out-Proof, Casting Approved

Being a client-centric firm, we offer secure payment procedure in both online and offline modes. The procedure is developed by our adroit professionals and approved by the authority. Reckoned for the offering outstanding array of products, we are headquartered in Mumbai(India).

We are the prime manufacturer and supplier of double headed hydrant valve, which are widely popular among clients for their fire fighting ability. The robust construction and ability to give reliable results have made our double headed hydrant valves hugely recommendable in various industrial sectors. specifications : equipped with:2 delivery endsa hand wheel to open/shut the water supplyflange that is attached to branch of hydrant postcarries the water under pressuredeveloped from gunmetalcan be customized as per our client’s specificationshighly durablecorrosion freeavailable in different sizes and variants widely used in : official buildingsresidential buildinglifts and elevatorsparking placesgo-downs and warehouses

Gate valves are primarily used for stop valves fully opened or fully closed. They are not normally considered for throttling purposes, but more for slurries, viscous fluids, etc. Gate valves are characterized by a traveling wedge, which is moved with the operation of the stem nut. The wedge travels perpendicular to the direction of the flow. Gate valves usually have a minimum pressure drop when fully open, provide tight shut-off when fully closed, and remain relatively free of contamination buildup.   BODY & BONNET The design of the body and bonnet is calculated to achieve the most regular distribution of stress in all directions, as well as the minimum turbulence and resistance to flow. Valve bonnets are equipped with a backseat bushing. The yoke is integrally cast on Pressure Classes 150 and 300 up to 12” and up to 10” on Class 600 and higher ratings.   BODY-BONNET JOINTStandard body-bonnet joints of gate valves are machinedas follows:PRESSURE CLASS JOINT DESIGN150 Flat Faced300, 600 Male-and-Female900* & over Ring Type Joint*Pressure Class 600 also available in Ring Type Joint.EMFLO  can supply any style of gasket required by customer.   GATE All gates are fully guided to the seats. As standard our valves are supplied with a solid flexible gate that has a tapered H cross-section. The flexible wedge is cast or machined with a circumferential groove to allow the seating surfaces to move independently and adjust to movement of the body seats. This design is beneficial where line loads or thermal expansion of the system is likely to distort the seat face in the valve. This design of gate is ideally suited for steam or other high temperature services and is especially useful to prevent sticking where valves are closed when hot and opened when cold.   SEAT RING Seat rings are designed to greatly reduce and/or prevent any turbulence and avoid damages due to the corrosion. The seat rings are forged or rolled in one piece, and then seal welded and overlaid, if required. After welding and all required heat treating, the seat ring faces are machined, thoroughly cleaned and inspected before leaving for assembly.   STEM The stem connection to the gate is a T-head design which is integral (without welding) with the stem. The accuracy in the dimensions and finishes assure a long life with a perfect tightness in the packing area, resulting in lower fugitive emissions. The stem-to-gate connection is designed to prevent the turning or the disengagement of stem from the wedge while the valve is in service. Through calculations and extreme testing, the strength of the stem-to-gate connection has proven to exceed the strength of the stem at the root of its operating thread.   STEM PACKING The stem packing is designed and arranged to ensure a maximum seal along the stem during operation or while at position, thus allowing for a greater reduction in fugitive emissions. Our packings are NON-ASBESTOS types. EMFLO can supply any style of packing required by our customer.   STUFFING BOX The depth of the stuffing box allows for a sufficient amount of packing, which makes the stem seal. Our standard packing arrangement and stuffing box design meets

• Material: CRC
• Brand Name: Aircons
• Surface Finish: Epoxy Powder Coated
• Shape: Round
• Available SIze: 4 to 8 inch

We are a leading manufacturer and supplier of Double Hydrant System in Mumbai

• Brand Name: Honeytech
• Valve Size: 1/4 inch, 1/2 inch
• Media: Hydraulic Fluid
• Pressure: 10 kg/cm2
• Structure: M Type With Box Coil With Wire Lead Or Pic
• Model Number: B63024

• Material: Cast Steel
• Brand Name: Rototech
• Usage: For direct connection to the pipeline
• Size of Air Lock: 150x150 - 500x500 mm

We are offering double flap valve.

Tube with valve Jointed & Seamless

Brass foot valves, Air Valve

Non Return Valve, Gun Metal Valves, Hydrant Valve, Foot Valve, Gate Valve

Hydraulic Check Valves, Hydraulic Spool Valve

double flange valves, firebricks of all kinds, Electric Tools, Spring Washer

Check Valve, Ball Valve, Gate Valve, Globe Valve

Two Way Valve, valve manifolds, Needle, Ball Valve, Gate Valve