Gate & Sluice Valves Dealers in Bhuleshwar, Mumbai

• Size: 1/2 (DN15) to 2 (DN50)

Forged Steel Gate Valve high quality forgings. Smith Valves offer Forged Steel Gate Valves in size 12 (DN15) to 2 (DN50) to suit various critical, non-critical applications and pressure rating, Third party inspection also. For High Pressure & Temperature application Stellited ST6 Face Seat & Gate available. Forged Gate Valve available is Threaded End, Socket Weld End, Butt Weld End and Flanged End Connection. For Flanged End Forged Gate Valve flanges will be a welded with a valve body not integral forged.

• Material: Alloy, Aluminum, Bronze, Copper, Iron, Metal
• Thickness: 100-200mm, 300-400mm, 50-100mm, 500-600mm, 700-800mm, 900-1000mm

Stainless Steel Forged Gate Valves, Alloy Steel Gate Valves, Carbon Steel Gate Valves, Duplex Steel Gate Valves, Brass Gate Valves Suppliers In India & Abroad.

• Material: Cast Iron, Carbon Steel, Stainless Steel, Gunmetal
• Pressure: 500, 1000, 1500, 3000 psi
• Temperature Range: 196 - to +85 Degree C
• Port Size: 1/2 - 2 inch

• Material: Mild Steel
• Feature: Durable, Corrosion Proof, High Tensile
• Technics: Hot Dip Galvanized
• Grade: Standard
• Usage: Industrial & Fittings
• Surface: Polished
• Quality: Best
• Resistivity: Rust Resistant
• Durability: Long Life
• Packaging: Bulk

• Material: Nickel Alloy
• Valve Size: 15 mm to 100 mm
• Type: Flanged Type
• Range: 1 MM to 200 MM thickness in 1000 MM to 3000 MM width x 2500 MM / 5000 MM/10000 MM / COIL
• Ends: Screwed / Socket Weld / Flanged
• Temperature Of Media: Low Temperature

Nickel Alloy : ASTM / ASME SB 162 UNS 2200 (NICKEL 200)/UNS 2201 (NICKEL 201), ASTM / ASME SB 127 UNS 4400 (MONEL 400), ASTM/ASME SB 424 UNS 8825 (INCONEL 825), ASTM/ASME SB 168 UNS 6600 (INCONEL 600)/UNS 6601 (INCONEL 601), ASTM / ASME SB 443 UNS 6625 (INCONEL 625), ASTM/ASME SB 574 UNS 10276 (HASTELLOY C 276), ASTM / ASME SB 462 UNS 8020 (ALLOY 20/20 CB 3).

• Material: Brass
• FINISH: Nickel Plated
• Sizes: Product Code
• M 12: V133-RSP-12
• M 16: V133-RSP-16
• M 20: V133-RSP-20
• M 25: V133-RSP-25
• M 32: V133-RSP-32
• M 40: V133-RSP-40
• M 50: V133-RSP-50
• M 63: V133-RSP-63

Gate Valves are largely designed to start or stop a flow when a straight line flow of fluid and minimum flow restriction are needed. In service, these gate valves are pretty much kept either fully open, or fully closed. Gate valves are primarily made up to start or stop a flow when a straight line flow of fluid and minimum flow restriction is needed. In service, these Gate Valves are pretty much kept either fully open, or fully closed. When turned open, the disc of the gate is completely removed allowing materials to pass. This gives the gate valve good shut-off property and allows it a bidirectional movement. They cannot be quickly blocked or unblocked. The Gate Valves shakes when it is blocked. Swastik Industries Steel Gate Valves have been designed to meet the requirements of API 600 BS 1414 API 603 API 6D ASME B 16.34, The stem nut design allows for the removal of the hand-wheel while keeping the Stem and Gate in a fixed position.

• Size: 25 mm to 200 mm
• Material: Cast Iron, Cast Steel, SS 304 / 316, SS 304L / 316L, Gunmetal etc.
• End Connection: Screwed, Flanged End Safety Relief Valves, Safety Relief Valves
• Type: Ordinary Lift Type, High Lift Type, Full Lift Type
• Pressure Rating: 150#, 300#, 600#, PN 40
• Design Standard: Self Actuating, Full Lift, Spring Loaded.
• Standard: API 526
• Temperature Range: -65˚F to 400˚F

• Brand Name: J.P.Metals
• Size: As per requirment
• Color: As per requirment
• Feature: As per requirment
• Material: As per requirment
• Model: As per requirment

• Size: ½” to 4” (15 mm to 100 mm)
• End Connection: Screwed, Flanged End Safety Relief Valves, Safety Relief Valves
• Pressure Rating: 150#, 300#, 600#
• Design Standard: Self Actuating, Full Lift, Spring Loaded.
• MOC: Cast Iron, Cast Steel, SS 304 / 316, SS 304L / 316L, Gunmetal etc.
• Widely Used For: Steam Boilers, Steam Services, Compressors, Receivers, Burners, Dryers and other Piping Systems and Many More.

Safety valves name itself indicates that they are used to ensure safety in a typical mechanism. ACE ALLOYS LLP is a renowned Safety Valves Manufacturer, Supplier with attractive prices. Perfection in design and accuracy in dimension are assured by our Industrial Safety Relief Valves. For the quality of our Safety Relief Valves, many illustrious firms prefer them. Thence we always maintain our Safety Valves Stock in substantial quantities. We use superior quality raw material and metal in the fabrication process of Spring Loaded Safety Valves and Water Safety Relief Valves. Latest design methodologies are employed to give rise to flawless ASME Safety Relief Valves and Leser Type Safety Relief Valve. To automatically abandon a pressure vessel or a system automatically, our pressure safety valves are employed. Similarly a Boiler safety valve releases a boiler. On the other hand, our Steel Safety Relief Valvesautomatically open from a liquid vessel when there is an increase in the pressure level. As our Alloy Steel Plug Valves and Aluminium Plug Valves exhibit properties like corrosion resistance, toughness, and durability, they are exported to many other countries across the world. We manufacture Brass Safety Valves and Bronze Safety Relief Valves in all the national and international standards.

Gate Valves Supplier in Mumbai, India, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania Gate Valves Suppliers, Suppliers in India, Usa, Canada, UK, Uae, Iran, Singapore, Ksa, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan. Gate Valves Supplier in Mumbai, India Want to buy Gate Valves, Choose Neelcon Steel for better price | India's Largest Dealer of Gate Valves in India. We are successfully ranked amongst the top manufacturer, exporter & suppliers of high quality Gate Valves, Gate Valves Suppliers / Exporters / Stockist / Manufacturers Mumbai India Neelcon Steel offer a wide selection of Gate Valves Stockist Mumbai (Maharashtra) India. Neelcon Steel Wholesale Various High Quality Gate Valves in all shapes and sizes and with any specifications that the clients, More then 1500 Clients in India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania Gate Valves What is a gate valve? GATE VALVES ARE WIDELY USED FOR ALL TYPES OF APPLICATIONS AND ARE SUITABLE FOR BOTH ABOVE GROUND AND UNDERGROUND INSTALLATION. NOT LEAST FOR UNDERGROUND INSTALLATIONS IT IS PARAMOUNT TO CHOOSE THE RIGHT TYPE OF VALVE TO AVOID HIGH REPLACEMENT COSTS.  Gate valves are designed for fully open or fully closed service. They are installed in pipelines as isolating valves, and should not be used as control or regulating valves. Operation of a gate valve is performed doing an either clockwise to close (CTC) or clockwise to open (CTO) rotating motion of the stem. When operating the valve stem, the gate moves up- or downwards on the threaded part of the stem.   Gate valves are often used when minimum pressure loss and a free bore is needed. When fully open, a typical gate valve has no obstruction in the flow path resulting in a very low pressure loss, and this design makes it possible to use a pipe-cleaning pig. A gate valve is a multiturn valve meaning that the operation of the valve is done by means of a threaded stem. As the valve has to turn multiple times to go from open to closed position, the slow operation also prevents water hammer effects. Gate valves can be used for a vast number of fluids. Neelcon's gate valves are suitable under the following working conditions: Potable water, wastewater and neutral liquids: temperature between -20 and +70 °C, maximum 5 m/s flow velocity and up to 16 bar differential pressure.  Gas: temperature between -20 and +60 °C, maximum 20 m/s flow velocity and up to 16 bar differential pressure. Parallel vs wedge-shaped gate valves Gate valves can be divided into two main types: Parallel and wedge-shaped. The parallel gate valves use a flat gate between two parallel seats, and a popular type is the knife gate valve designed with a sharp edge on the bottom of the gate. The wedge-shaped gate valves use two inclined seats and a slightly mismatched inclined gate.  A gate valve, also known as a sluice valve, is a valve which opens by lifting a round or rectangular gate/wedge out of the path of the fluid. Gate ValvesGate Valves are primarily designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed. The disk of a gate valve is completely removed when the valve is fully open; the disk is fully drawn up into the valve bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. Advantages of using gate valves: Good shutoff features Gate Valves are bidirectional and therefore they can be used in two directions Pressure loss through the valve is minimal The major drawbacks to the use of a gate valve are:  They can not be quickly opened or closed Gate Valves are not suitable for regulate or throttle flow They are sensitive to vibration in the open state Main design of butterfly valves     The butterfly valve can be centric or eccentric. On a centric (concentric) butterfly valve the stem is centered in the middle of the disc and the disc centered in the bore. The eccentric butterfly valve has one or more stems (stub shafts) located offset from the center according to the categories of single, double and triple offset valves.

• Type: Bolted Bonnet O. S. & Y Type Rising Stem
• Pressure Rating: ASA 125#, 150#, 300#, 600#, 900#, 1500#, 2500#
• End Connection: Screwed to BSP, BSPT, NPT, Socket Weld, Flanged Ends, Ring Type Joints(RTJ), Butt Welded as per ANSI B 16.5 / B 16.25
• Size: 25mm to 1000mm
• Design & Mfg. Standard: API 600, API 6D, MSS SP-81, BS 1414
• Inspection & Testing Standard: API 598
• Body Material: WCB, Cast Iron, CF8, CF8M, CS, SS, AS, LCB, WC6, WC9, Alloy 20
• Trim Materials: 13% Cr. Stellited, AISI 304/316/Monel
• Face to Face Dimension: ANSI B 16.10

Gate Valve / Knife Gate Valve are a mechanism which consists of a circular gate, which on rotating allows liquid flow. Nakshatra Steel & Alloys is a renowned Gate Valve Manufacture & Supplier in the contemporary market. For the great demand of our products, we always maintain sufficient quantity of Gate Valves Stock. The exceptional Gate Valve Properties attract more number of customers towards us. Being an eminent Knife Gate Valve Supplier, we always maintain friendly relations with all of our clientele. Features and prices of all of our products can be noticed in our Knife Gate Valve Stock list. We contribute all of our goods at economical market prices. As per the industrial requirements of our customers, we design our mechanisms with appropriate Gate Valve / Knife Gate Valve Specifications. We enhance the properties of ourStainless Steel Gate Valves by adding small quantities of special chemical elements. Our Alloy Steel Gate Valves are a combo of components like Molybdenum, Silicon, Chromium, Boron, Vanadium, and Nickel. Our Aluminium Knife Gate Valves and Brass Knife Gate Valves are noted for their ease, durability, and flexibility. We properly train our employment personnel to use modern techniques while designing Bronze Knife Gate Valves. All the properties and features of our products are perfectly showcased. Choose the product of your choice, and place your order right now. In case of any queries, feel free toget in touch with us!

• Color: Blue
• Material: Stainless Steel
• Media: Water
• Surface Finish: Color Coated
• Available Grade: SS 304,316,310

• Size: 1/2" - 2"
• Material: FS & SS

These are available either with Treaded or Socket Weld ends. Hard Faced Trim material ensures perfect Sealing and long life. Perfectly machined and Lapped Back Seat is provided to ensure re-packing/replacing of Gland Packing in stream, when the Valve is in full open condition, ensures maximum safety, convenience and economy.

Gate Valves can be availed from us. We make available the highest grade Gate Valves in market. Qualitative raw materials are used in manufacturing our Gate Valves. These accurately dimensioned Gate Valves are widely used for varied applications. Owing to their corrosion resistance and perfect finishing, these Gate Valves are preferred by clients.

• Type: BUTT-WELDING, FORGED/CASTING THREAD SOCKET-WELD.
• Thickness: SCH5S / SCH10S / SCH40S / SCH80S / SCH 120S
• Item: 90° ELBOW ( LONG RADIUS / SHORT RADIUS ), EQUAL TEE,45° ELBOW ( LONG RADIUS / SHORT RADIUS ), REDUCING TEE, ROUND CAP, CONCENTRIC REDUCER, ECCENTRIC REDUCER, STUB END
• Stainless Steel Material: ASTM A403 WP304 / WP304L / WP316 / WP316L / 316 Ti / 321 / 310 / 347 / 904L
• Carbon Steel Material: ASTM A234 WPB, WPC ASTM A105
• Alloy Steel Material: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91
• Dimension: ANSI B16.9 / MSS SP- 43 / JIS B2313
• Size: 1/2" - 48"
• Method: SEAMLESS AND ERW
• Make: Manufacturer & As per design & Specification

StainlessCarbonMild Steel Gate Valves will be valves that work by lifting of a round or rectangular entryway out of the way of the liquid. This StainlessCarbonMild Steel Gate Valves encourages just unidirectional stream, yet not at all like globe valves they give a to the max stream to the liquid. The round or wedge formed ring is referred to an entryway as it moves in an opposite bearing to the stream of the liquid.

  Fittings are produced in stainless steel, carbon steel, allo steel, Various types of fittings available are Elbow, Reducer, Tee, Nipple, Hex, Couplings, Fasteners, Plug, Cap, Olets, Weldolets, Union, Valve, Bend, 3D Induction Bend.