Gate & Sluice Valves Dealers in Goregaon, Mumbai

Ambika Gate valves are designed to provide minimum turbulence & resistance to flow when in fully open position.  Sufficiently long guide ribs in the body along with accurately machined wedge guide slots ensure accurate control & alignment of wedge while operating wedges are generally solid type & are accurately machined, precisely aligned & perfectly lapped with renewable seats in carbon steel & integral seats in stainless steel.  All the valves have back seat arrangement as an additional sealing under full working pressure which facilitates replacement of packing with valve under fully open condition.

With us, payment transactions will always remain secured as we follow reliable online payment gateway that is handled by a trusted e-commerce application service provider. In order to maintain high-quality standards in our offerings, we make use of the finest grade raw material. Also, we ensure that the material is sourced from the reliable places only.   Exclusive Features of our 1" & 2" Pressure Relief Valves Compact, Economical and highly reliable design. The short tail allows an easy placement for any portion of the cover. Bursting pressure adjustable from .22 to .70 Kg/sq. cm. Rugged Forged Brass body and Shutter with 1" and 2" BSP outer thread for Vertical and Horizontal mounting of the Tank. Center Rod is Made out of Brass to Ensure a Safe and Steady Service and a Long Life. Protection Built into the Cap in order to direct any Oil Spills Downward. The Valve can be used as filling Cap too.   Exclusive Features of our 3" & 6" Pressure Relief Valves Type 304 Stainless Steel Deep Drawn Diaphram with Spring Locator Convolutions. Specially designed reverse wound springs and Assemble methods provides uniform valve loading and Improved relief rates. Unique Spring retaining system on Diaphram and cover. All stainless steel fastners and hardware. Automatic Instantaneous Venting and Sealing. 100% Tested for Proper Operation and Serialized for Traceability. Pressure Die cast is porosity free. Aluminium flange and Cover are duly UV Proof Powder coated for better climate protection. IP 67 protected Switch with 1NO and 1NC contact. Brightly coloured flag, Integrated with switch, gives visual indication of valve operation by raising a flag.

• Material: Metal
• Usage/Application: Air Processing
• Automation Grade: Manual
• Rust Resistance: Yes
• Finish: Coated
• Size: Available in Different Sizes

• Application: Gas Fitting, Water Fitting
• Feature: SS316L
• Pressure: Low Pressure,  Set Pressure Range - 20 Millibar To 2.5 Bar
• Country of Origin: India
• Brand Name: Mascon
• Certification: CE, GMP, FDA
• Automatic Grade: Automatic
• Number Of Way: 2way
• Description: PHV - Pilot diaphragm sanitary Back Pressure Regulating Valve  PRV - Pilot diaphragm sanitary downstream Pressure Reducing Valve
• Size / End Conn.: PHV - DN 15 to DN 80 / Butt weld end and Triclover end  PRV - DN 15 to DN 40 / Butt weld end and Triclover end
• MOC: STD - ANSI SS 316L
• Diaphragm: STD - EPDM Optional - PTFE, Silicon, Viton on request will be available.
• Medium: Purified Water, Steam
• Temp.: STD - 80°C Optional - 110°C

• Material: Carbon Steel, SS 316, SS 304, SS 316L
• Size: 1/4" to 1"
• End Connections: Screwed, Socket Weld
• Maximum Working Pressure: Up to 10000 PSI

we are offering high pressure ball valves.this range offers a reliable option for the high pressure application. These valves are recommended for the use in oil, gas, petrochemicals where the long life is required.

We are the supplier of this product.

• Material: Carbon Steel, SS 304 ,SS 316
• End Connection: Screwed ( BSP / NPT ), Welded Nipple type.
• Operation: Hand operated
• Applications: Flow throttling or shut off and test benches, panels etc.
• Temperature: Upto 120 Degree C
• Pressure: Up to 1000 Bar.

2-Way High Pressure Ball Valve Technical Specification : Materials-Carbon Steel/Stainless Steel Ball Seat- POM/PEEK/PTFE/GFT/CFT Body & Stem Seals-PTFE /NBR/FPM Size - 1/4" Pressure Range-up to 1000Bar Temp. Range -40°C +200°C End Conn. Screwed-BSP (ISO-228 T1) NPT Male/Female Extended Nipple, Male threads DIN2353 U DIN-2353 S Accessories: Actuators, locking device, limit switches proximity switches (for position indication and remote controls)

Diaphragm Pressure Reducing valves are also sometimes known as pressure regulators, as they are used to protect against the effects of high level water pressures. Basically Municipal and private water supply companies use pumps and pumping stations to boost water supply pressure in supply mains, so that they should be able to supply water for fire fighting, high rise building to overcome loss of pressure as the altitude increases, and to maintain water supply in water towers and supply tanks. Pressure in water supply mains can exceed 200 psi.

Plug type disc and outside screw and yoke are provided for ease of operation.Screwed or socket weld ends for class 800 valves upto 800° F and flanged ends offered for class 600 values upto 800°F

• Material: SS
• Brand Name: Diamond Engineering Works (India)
• Size: Customize Size
• Usage/Application: Safety Valve
• Color: Silver
• Features: Sturdy construction, Thermal stability, Ability to handle high pressure

• Size Range: 2“ – 72”
• Temperature Range: Up to 120°C or higher
• Pressure Rating: PN10, PN16, PN25
• Connections: Flange, Lug
• Body Material: Ductile Iron, WCB, SS
• Operating: gear box, electric actuator, Handwheel,

Seal Options  Resilient Wedge Seated, MetalSeated

• Material: Stainless Steel
• Pressure: Up To 50 Bar Pressure
• Type: end pressure relief valve
• Media: Water
• End Connection: TC

We offer Gate Valve. Model : GT-1-F-F-A1 (150#), GT-1-F-F-A2 (300#), GT-1-F-F-A3 (600#) Size : 40-600 mm Bore : Full Material : Carbon Steel, Stainless Steel Ratings : 150,300 &600 Class Ends : Flanged & Butt weld on request Option : Stellite Trim, Jacketing, Soft Seating

It is designed to seal an end run of an apparatus. (Special requirements available on request)

Body Materials: SS 316, SS 316L, SS 321, Duplex 2205, Titanium, Alloy 400, Alloy 625, Alloy C-276. Pressure Rating: 3000psig (203 bar), 6000psig (413 bar), 10000psig (690 bar) @ 38°C (100°F). Temperature Rating: -53°C (-65°F) to 232°C (450°F) with standard PTFE packing. Size: 1/4″ to 1″, End Connection: NPTM/NPTF. Threads with smooth surface finish avoid galling and help to extend the fitting service life.  

• Feature: Excellent corrosion resistance, Superior strength, Strong fabrication, Very durable

• Pressure: Adjustable 0.35 to 0.7 PSI
• Brand Name: Press-N-Forge
• Valve Size: 1/2",3/4",1",2"
• Media: Transformer Oil
• Material: Brass/Bronze
• Model Name/Number: PPRV - 1,PPRV -2
• Weight: less than 1 kg
• Rotary Type: No
• Available Size: 1/2",3/4",1",2"
• Usage: Industrial