Gate & Sluice Valves Dealers in Mahim, Mumbai

• Specialities: Sturdiness, Lightweight, Easy to fit

Safety Valves Are you looking for a Suitable Supplier for Safety Valves? Various Safety Valves Safety Valvesstandards full range,fast delivery, contact Global Steel & Engg for all types of Safety Valves. , Safety Valves suppliers with a wide range of Stainles Steel Safety Valves, Bronze Safety Valves, Cast Steel Safety Valves, Cast Iron Safety Valves, The strength of our company lies in the strength of personnel who produce quality work. We believe in cohesiveness and team effort. The company is following the policy of continuous up-gradation of technology and processes while maintaining its cost effectiveness by making optimum use of its resources and goodwill. Salient Features are as follows: Design, Mfg. & Tested as per API 520, 521, 526, 527 standards Models Comply to ASME Section VIII of boiler & pressure vessels code Registered under Indian Boiler Regulation (IBR) Also approved by chief controller of explosives department (CCOE) Conventional or Balance Bellows Design Complete Teflon (FEP/PFA). Lining for highly corrosive services Soft Seat arrangement for Tight Shut-Off. Weight & lever type Safety Relief Valves are offered for low set pressure and high discharge capacity All Thermal Relief Valves (BTS-10 & BTS-11) models are offered in Investment Casting (1/2" to 2") Stellited Trims for high Pressure & Temperature Safety Relief Valves are Inspected, Tested, & Certified by BV / DNV / TUV / MECON / IBR / CCE / BAX Council Size Range from ½" x ¾" to 10" x 14" Material of Construction CI / CS / SS 304 / SS 316 / GM / Alloy Steel.

• Material: Stainless Steel ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351

As per IS & AWWA specs. Circular Square Rectangular openings. Frame Thimble mounting. With flush-bottom seal as option. Metal to Metal or resilient seat options available.

• SS: AS PER REQ

Offering stainless steel 316lvm w.nr 1.4441 uns s31673 aws 163 applicable standards: bs 7252 pt1 composition d astm f138 contact us..product range regarded as 'medical grade', this stainless steel 316 is vacuum melted to achieve the extremely high levels of purity and 'cleanliness' required for surgical implants. It has excellent resistance in physiological environments, to general and intergranular corrosion, to pitting and crevice corrosion.in form wire, round, tube, strips, applications include: medical implants high precision electronics

• Material: A 105, A 479 304, A 479 316, A182 GR F 316, Monel, Hastelloy, Duplex
• Test Pressure: @ 25°C Room Temperature,Hydrostatic: Body - 415 bar(g)
• Gland Packing: PTFE: Standard,Graphoil: Temperatures Above 200°C

A compact needle type valve for isolation of lines, sampling, throttling & similar applications. The valve has screwed ends to be used with pipes & tubes for panel mounting.These needle valves are available with a variety of end connections and stem packing.

• Media: Air, Water, Gas, Fuel, Powder/Solids
• Material: Stainless Steel
• Brand Name: KE
• Temperature Of Media: High Temperature
• Condition: New
• Valve Size: 1/4'' -2''
• Power: Hydraulic
• ISO Certified: Yes

• Type: Threaded Hex Plug
• Specifications: ASTM A182, ASTM SA182
• Dimension: ASME B16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
• Size : 1/8″ NB TO 4″ NB
• Form : Plug, Hex Head Plug, Hex Plug

ANSI B16.11 Threaded Hex Plug Fittings, Screwed Hex Plug, Forged Screwed Hex Plug, Forged Threaded Hex Head Plug, BS3799 Screwed Forged Hex Plug, Nickel Alloy Hex Head Plugs Manufacturer in Mumbai, India. Stainless Steel Threaded Hex Plug, SS 304 / 316 Threaded Hex Plug, Threaded Forged Hex Plug, ASME B16.11 Screwed Hex Plug, Inconel Screwed Hex Plug, Alloy 20 Threaded Hex Head Plug Stockholder Over 20 years, K. K. Industries is successfully pioneering the industry as the most consistent supplier, exporter and manufacturer of Threaded Hex Plug for a wide variety of applications. These type of threaded fittings are ideal for low-pressure testing and in-house handling. Also, our offered range of threaded Hex plug pipe fittings also offers excellent features like easy installation, robust construction, highly durable, industry proven designs and portability to our valued patrons at a nominal price. These Threaded Hex Head Plugs are made available in a wide range of material like Stainless Steel, Nickel Alloy, Monel Alloy, Cupro Nickel, Inconel, Hastelloy and more. Contact us today to request a free estimate! Duplex Steel Threaded Hex Plugs, Copper Nickel Threaded Hex Head Plugs, Hastelloy Forged Hex Head Plugs, MSS SP-79 / MSS SP-83 Inconel Screwed Hex Plug, SMO 254 Threaded Hex Head Plug Traders in India.

Sluice valve is the most populous & relied upon water-works valve since decades. R & D Multiple’s Sluice Valves are consciously built to fulfill customer’s expectations & faith. They not only comply with the requirements of the specifications & codes, but also offer features, accessories, quality & workmanship levels which make them the unique choice for any waterworks isolation application. Accessories such as: Gearing (SpurBevel), Thrust Bearing, Actuators (Electrical Pneumatic), By–Pass, Position Indicator, Channel & Shoe, Chain-wheel Cap-Top operation etc. can be offered.

Features Compression Tube Fittings: General compression tube fittings are Double Ferrule type fittings which provide leak proof torque free seals at the tubing connection. They provide safety and eliminates hazardous leaks of fluids in instrumentation field for process, pressure, hydraulic & other applicable tubing system. The basic general tube fitting is a 4 piece fitting consisting of the nut, the back ferrule, front ferrule and the body. When installed, it becomes 5 piece connection with the addition of the tubing providing solid leak free joint. The tube ferrule grasp tightly with no damage to the tube wall. The success of the ferrule lies in the combination of geometry & metallurgy. All the action in the fitting is by an axial movement along the tube instead of rotary motion to form a joint. This axial movements prevents any torque to be transmitted from a fitting to tubing, the making of the joint strengthens the tube futher. Another advantage of the General Fittings is that the sequential action of the twin ferrule overcomes variations in the wall thickness, hardness and dimensional tolerance of the tubes. This way proper ferrule interaction compensates for most of the variables which lead to failure in fittings. General Fittings are easy to install and require no special tools in the process. They are reusable several times and can withstand heavy impulse and vibration both in vacuum and pressure systems. Absence of damage to the tube surface prevents fatigue failure. General Double Ferrule compression tube fittings have the following features: DESIGN Its self aligning Works on thick and thin wall tubing Resists vibration Fits on a variety of tube materials Have all components made of the same material and hence possess thermal compatibility and corrosion resistance Resistance to temperature cycling Compensates for the variables encountered in tube materials Dimensions and metallurgy   PERFORMANCE   Works on vacuum as well as low and high pressures Seals at cryogenic temperatures as well as elevated temperatures rated for the tube Seals consistently over a wide range of temperature cycling Seals repeatedly under make and break conditions Resistant to pressure upto the burst point with the tubing without any leakage   ASSEMBLY   Uses geometry rather than torque for uniformity of make-up. It requires only one and quarter turn after snug tight to complete the joint Does not require dismantling and inspection of ferrule swaging at every make-up Does not require any special tools for assembly

• Material: Brass
• Country of Origin: Made in India
• Size: 1/4" TO 2"inch
• Usage/Application: Industrial
• Temperature: 150* C

• Material: Alloy Steel,Carbon Steel,Forged Steel,Stainless Steel
• Type: Gate Valves
• End Connection: Butt Weld,Flanged,Screwed,Socket weld Ends
• Weight: 10-15kg
• Condition: New
• Certification: Other
• Color: Other
• Application: Gas Fitting,Oil Fitting,Water Fitting,Other
• Feature: Good Quality
• Pressure: Low,Other
• Size: 100-150mm,150-200mm,200-250mm,250-300mm

For maximum customer satisfaction, we ensure that the product reaches the customer in the said time slot, owing to our reliable shipping facilities. To maintain optimum product environment, we use superior grade packaging material that is nontoxic. The labels on packs provide products details clearly and are smudge-proof.

Our company holds expertise in offering quality Pressure Relief Valve. Designed with complete precision, our Pressure Relief Valve is known for superb quality, dimensional accuracy and exceptional durability. This valve is available in variegated specifications to meet diverse requirements of the buyers. Every valve is quality approved by the authorities after stringent quality tests. We take up bulk orders of Pressure Relief Valve and fulfill the same with utmost ease.

• Material: Stainless Steel
• Brand Name: HE
• Application: Industrial
• Size: 15-300 Mm
• Surface Finish: Powder Coated
• Packaging Type: Box

• Brand Name: SPIRAX
• Material: CS
• Media: Gas
• Pressure: AS PER REQUIREMENT
• Design: STD
• Structure: STD
• Temp. Range: 800 DEG CELCIUS
• Model Number: DP

We are reckoned as a high-flying Supplier offering quality and certified array of Motorized gate valve. With us, payment transactions will always remain secured, as we have adopted modern payment procedures that guarantee instant and hassle-free transactions.

We make available Gate Valves which are reckoned for their make and long service life. We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss. Our team members help us completely to deliver exceptional range of products that is in conformance with the standards.

We offered complete range of Forged Valves 1/4" to 72 NB" for Chemical, Petrochemical, Refinery & other sectors for severe & critical applications. Given below is the range of Valves which we can offer from our European ISO certified manufacturers with proven global credentials. W. P.: 200WOG W. T.:-20℃ ~200℃ (-4℉~392℉) Investment casting Non-rising stem Thread type: ASME B1.20.1 (NPT), DIN 2999 & BS21, ISO7/1 & EN10226

hexagon plugs, Lap Joint Flanges, threaded coupling, Threaded Cross

• Material: Brass to BS 2874 / 2872

Brass Pins for electrical Plugs and electrical Sockets Industrial Plug Pins Electrical 15 Amp Plug Pins UK type Plug Pins Brass pins We can offer Brass Male Pins and Female Pins, Live Pins, Neutral Pins and Earth Pins      

We are looked upon as one of the most dependable Unloader Valve Exporters in India. The Air Unloader Valve is widely used in various European, American & Japanese Vehicles. Moreover, the Auto Unloader Valve automatically controls the operating pressure in an air pressure system so as to restrict the pollutants from reaching the valves, reservoir & pipe lines.

Fittings, Stainless Steel, metal flake, Nut Bolts, Metal Rings

PVDF Products, Boron carbide, instrumentation tubes, Aerospace Alloy

SpecialityValve is well reputed steam pressure reducing valve manufacturer in mumbai. Steam reducing pressure valves precisely control the downstream pressure of steam and automatically change the amount of valve opening to maintain the pressure even when the flow rate changes due to pistons, springs, or diaphragms. The pressure reducing valve uses the opening and closing parts in the valve body to adjust the flow of the medium, reduce the medium pressure, and adjust the opening degree of the opening and closing parts with the pressure behind the valve, so that the pressure behind the valve remains in a certain range, even if the inlet pressure changes constantly.   Advantages of steam pressure reducing valve ·        No requirement of external power source. ·        Separate measuring elements or feedback controllers are not required. ·        Simple design with low cost. ·        High reliability and easy maintainability ·        External leakage and source of high friction is eliminated by the absence of stem packing. Industries that use steam pressure reducing valve ·        Water treatment plant ·        Steam ·        Oil & Gas ·        petrochemical industry ·        textile industry Description: ·        Body Materials: CF8, CF8M,Cast Iron, Wcb, Wcc, wc6,wc9, Ductile Iron, SS304, SS316,CF8M, SS316L, SS904L, Duplex Steel (F51,F53,5A,4A,6A), Super Duplex steel[55] ·        Class:150 to 2500 , PN10-PN450 ·        Size: 1/2” to 24” ·        End Connection :Socket weld butt weld, flanged, threaded     For more visit: https://www.specialityvalve.com/product/flanged-steam-pressure-reducing-valve/  

Check Valves, Globe Valves

Fittings, PPR Pipes, exclusive sanitary wares, luxury bath fittings

PPR Gate Valve, Borewell Submersible Pipes, Circle Manhole Cover

ibr valves, Cast Iron Sluice Valves, GPS System, vehicle security system

pressure valve, Fresh Fruits, vegetables, 1121 white sella Rice