Gate & Sluice Valves Dealers in Powai, Mumbai

Limiting conditionsmaximum working condition 26 kg cm2 at 300° c.body design conditions 42 kg cm2 at 427° c.cold hydraulic test pressurewithout internals 52 kgcm2 three colour coded pressure adjustment springs are available for the following downstream pressureranges:yellow :02 to 3 barblue :2.5 to 7 barred :6.0 to 17.3 bargrey :16.0 to 24.4 bar sizes:nb 15,20, 25,40, 50 and 80.std. Accessories: pr. Gauge, syphon & gauge cockpipe connections:flanged to -bs10 table - 'j' * & 'k' ansi - 300' * & '600' din - nd - '25' & * '40'*note - 80 nb has these flanges only. Available with ibr certificate. Also available for air applications. Pressure sensing pipe:the dp 143 valve controls the downstream pressureby sensing the down stream pressure through anexternal sensing pipe taken from down stream to thepilot valve chamber (10) fitting of this externalpressure sensing pipe is described in the usermanual if the external sensing pipe is not provided then thevalve controls by internal pressure sensing pipe (19).however the capacity in this case will be reduced.installation:see user manual supplied with the valve.how to specify:example 1) 20 nb spirax marshall dp -143for steam flanged to bs 10 table 'k' ibr(or nibr). 2) 40 nb spirax marshall dp 143 for airflangedto ansi 300 nibr.pressure reducing valvedp 143

• Connection Type: NPT(F)
• Port Size (NPT(F)): 0.25
• Outlet Port: 1/4" NPT(F)
• Inlet Port: 1/4" NPT(F)
• Max Pressure (PSI): 75
• Tubing OD (in): 1.375
• Length (in): 4.5
• Type: Masterflex PVC Pressure Relief Valve

We are one of the leading manufacturers, exporters & suppliers of Knife Gate Valves. Knife gate valves offered by us are widely used for isolation of solid-liquid mixes in water and waste water treatment plants. Apart from this, our Knife Gate Valves are also demanded at, power plants, pumping stations, paper plants etc. Download

    VALTECH” compact design & high pressure, Forged Steel Gate Valves are designed and manufactured with reference to standard API 602 for small Pipelines up to 50NB. They are available in Threaded as well as Socket Weld ends. Hard Faced Trim material ensures perfect Sealing and longer life. Lapped Back Seat is provided to ensure re-packing/replacing of Gland Packing in stream, when the Valve is in full open condition which ensures maximum safety, convenience and economy. If required, Valves can be offered under any THIRD PARTY INSPECTION. “VALTECH” Gate Valves are available in various materials like Forged Carbon Steel conforming to ASTM-A-105, Forged Alloy Steel like ASTM-A-182-F11, F22 and Forged Stainless Steel like ASTM-A-182 F304, F304L, F316 and F-316L. Size range starts from 15 NB through 50NB and pressure rating up to ANSI 2500#.  

We are leading supplier of huge range of High Pressure Ball Valves.

We offer gate valve, globe valve, swing check valve , ball valve , butterfly valves in various material grades such as ci , wcb, wcc, wc6, cf8 , cf3 , cf8m , cf3m, duplex , super duplex, cn7m, manufacturing & supplying.

• Size: 3" to 20"

PRDS used in turbine bypass applications help to protect the turbine during start-up, power trip and also for part load generation. Turbine by pass valve prevent venting of steam into atmosphere and allow the steam to be dumped into condenser, so that energy can be saved to generate high temperature Boiler Feed Water.

We Present to Customers a Superior Range of Pressure Relief Valves. Pressure Relief Valves are Used as a Safety Device to Avoid Harm or Damages Caused to Equipment, Piping and Its Allied Components Caused By Sudden Increase in Excessive Pressure. These Pressure Relief Valves are Fitted At the Discharge Line. the Pressure Relief Valves are An Adjustable Spring Loaded Valve. the Valve is Factory Adjusted for Set Pressure as Specified Originally or At 15 % Above the Rated Pump Pressure. Depending On Pipe Line Size and Flow Rates and Set Pressure, the Inlet and Outlet Sizes of the Pressure Relief Valves are Designed. features excellent Quality Adjustable Spring Loaded Efficient Working Wide Range applications prevent Equipment Damageas Safety Measures Control and Limit Pressure.

Application Pressure relief valves are Compatible with all CFC, HCFC and HFC Refrigerants and oils and other Industrial gases and fluids non-corrosive to steel and brass. (With suitable Gland/Seal). Construction Valve Body: Extruded Brass. Valve Cap : Forged Brass Spring: Stainless Steel Seat Material: Neoprene/Teflon. Machined parts: Extruded Brass. Design Pre compressed special grade SS Spring provides unchanged tension for life of Valve. Pre stressed virgin seat material improves accuracy of pressure ratings. Designed for quick Discharge and immediate shut down. Available in pressure Range from 150psig – 450 psig. Pre set on imported accurate pressure gauge. Working Temperature range is -30°C to 100°C. Installation. Inspect valve and Install only if factory seal appears untampered. For leak tight sealing use Torque wrenches set at 30 Lb.Ft and ensure that Female thread is exact match. Shelf life of Valve is 18 months from date of manufacture. Beyond this period if unused return valve to Factory for recalibration. We recommend replacement of the valve after it pops open. It may not open again at preset pressure on account of Debris impregnation in seat and ageing of seat material. Under no circumstances open the seal and try to reset the valve as it needs special tools and trained technicians.

pressure regulating valves, pharmaceutical machinery parts, Filling Vessel

We offer safety valve.

Metal Stopping Plugs, C-LUX 6100 Compact Light Fitting

Fittings, Industrial Fasteners, Tees, Stainless Steel Tubes, Wire Mesh

pressure valve, pollution control equipments, Pvc Pipe, Clamps

Ball Valves, Butterfly Valves, Check Valves, Diaphragm Valves, Globe Valves

Relief Valve, Hydraulic Valves, abrasive, Accumulator, Filter, Cylinder

Pipe Fittings

Ball Valves, Check Valves, Globe Valves, Industrial Valves

Safety Valves

Brass Gate Valve, Brass Non Return Valve, SWR Pipes, hdpe plb duct pipes