Vats Micro fine Filters Pvt. Ltd. Vikhroli, Mumbai, Maharashtra

Balston Vacuum Pump Exhaust Filters remove 99.9% of 0.1 micron oil mist and smoke particles. Balston Grade 30 vacuum Pump inlet Filters remove 90% of all 0.1 micron particles and droplets. Balston Grade 102 Vacuum Pump Inlet Filters prevent oil back streaming from the pump to the evacuated chamber, and protect the pump from damage by submicron particles (at relatively low concentrations).   All Balston filters are available for hazardous and non-hazardous applicatioon, and offer superior chemical and solvent resistance. Balston Vacuum Pump Filters increase productivity by eliminating costly shutdown time and maintenance.

Balston® Steam Filters Balston Series SR Filters are in full compliance with the requirements of the US Food, Drug and Cosmetic Act. They also meet the regulations for Indirect Food additives used as Basic Components for Repeated Use Food Contact Surfaces as specified in 21 CFR Part 177, and Current Good Manufacturing Practices, 21 CFR Part 110. These filters have been accepted by the USDA for use in federally inspected meat and poultry plants. Balston Steam Filters are in full compliance with the 3A Accepted Practices (Number 609-04) for producing steam of culinary quality. They are also in full compliance with the requirements of the Health Protection Branch of Health and Welfare Canada. Sterile Air Filters Balston grade SA filter cartridges, rated at 99.9999+% efficiency for 0.01 micron particles are used in the food and firmentation industry and are FDA approved. These are Steam Sterilizable.

Protect the Environment and your Investments Compressed air is a fundamental source of energy for the large majority of industrial processes. However, air from a compressor is often too humid, contaminated or hot to be used in the production chain without prior treatment. The application of high-quality air ensures continuity and reliability of industrial applications, the highest quality standards for finished products and the optimization of production costs. Parker Hiross offers a range of refrigerated air drying solutions including:   • Low and medium-capacity cycling refrigeration dryers, products which have made Parker Hiross the world leader in the field of refrigerated air drying. The current ranges -Starlette Plus®, PoleStar Smart® and PoleStar Smart® HP -are the products of more than forty years of experience in the research, development and production of compressed air treatment systems. • High-capacity cycling refrigeration dryers, available as standard models or custom-made to customer requirements. • Adsorption dryers, for ‘supercharged’ drying, where a dewpoint in the -40°C to -70°C range is required.

MAXIGAS nitrogen gas generators from Parker domnick hunter produce nitrogen gas from compressed air and offer a cost-effective, reliable and safe alternative to traditional nitrogen gas supplies such as cylinder or liquid.   Nitrogen is used as a clean, dry, inert gas primarily for removing oxygen from products and/or processes.   MAXIGAS provides an on-demand, continuous source of nitrogen gas which can be used in a wide range of industries such as food, beverage, Pharmaceutical Laboratory, chemical, heat treatment, electronics, transportation, oil and gas and laser cutting.

Find out if you have oil or water in your compressed air lines! Finite’s new disposable indicators are an easy way to detect the presence of liquid (water or oil) in a compressed air system. The indicators will change from white to red when the respective liquid is present and provides peace-of-mind for critical applications throughout a facility.   KSDS-W: Detects liquid water.KSDS-O: Detects liquid oil.

MIDIGAS nitrogen gas generators from Parker domnick hunter produce nitrogen gas from compressed air and offer a cost-effective, reliable and safe alternative to traditional nitrogen gas supplies such as cylinder or liquid. Nitrogen is used as a clean, dry, inert gas primarily for removing oxygen from products and/or processes. MIDIGAS provides an on-demand, continuous source of nitrogen gas which can be used in a wide range of industries such as food, beverage, Pharmaceutical Laboratory, chemical, heat treatment, electronics, transportation, oil and gas and laser cutting.

Balston Compressed Gas Filters Balston high flow rate compressed gas filters offer exceptionally high efficiency coalescing filtration of compressed gas at high flow rates. Specifically designed to remove suspended liquids and dirt from pipeline natural gas, the housings are ASME Code Stamped up to 1440 psig. Equipped with Balston Microfibre® Grade DXE Disposable Filter Cartridges, the filters are rated at 93% retention of 0.01 micron and essentially 100% retention of 1 micron liquid droplets and particles.  

Balston high flow rate compressed gas filters offer exceptionally high efficiency coalescing filtration of compressed gas at high flow rates. Specifically designed to remove suspended liquids and dirt from pipeline natural gas, the housings are ASME Code Stamped up to 1440 psig. Equipped with Balston Microfibre® Grade DXE Disposable Filter Cartridges, the filters are rated at 93% retention of 0.01 micron and essentially 100% retention of 1 micron liquid droplets and particles.

The 99XX-05 Models are the smallest Disposable Filter Units with 11.7 ml internal volume. These models are used in low flow gas or liquid sampling applications, such as liquids to specific-ion analyzers or gases to personal samplers. The Model 4433-05 has 1/4" and 3/8" barb connections molded into the inlet/outlet ports. The 9900-05 is available with a color indicator that turns red when saturated with oil.   Models 9922-11 and 9933-11 Models 9922-11 and 9933-11 are used for application s similar to the smaller DFUs (Models 9922-05 and 9933-05) which require greater solids holding capacity and can tolerate the increased retention time.   Model 8833-11 These Disposable Filter Units are used as continuou s coalescing filters with a third port serving as the drain, slip-stream, or by-pass port.

The Balston GS Series Membrane Filter Cartridges combine absolute membrane filtration down to 0.01 μm, with an integral pre-filter to protect the membrane. Ideally suited for high purity compressed air and gas requirements, these membrane cartridges are available in several housing configurations shown above.   Use as a Final Filter for:Ultra-high purity gasesCorrosive or toxic gasesCylinder gasesDoping gases

Balston Membrane Air Dryers combine a superior coalescing technology with a proven, innovative membrane system to supply clean, dry compressed with dew points as low as -40°F (-40°C). The Balston Membrane Dryers are available in different model swhich can deliver compressed air at flow rates upto 100 SCFM with a -40°F (-40°C) dewpoint. The Balston Membrane Air Dryers are engineered for installation, operation, and long term reliability. The dryers incorporate high efficiency coalescing filtration and the highest efficiency membrane available to provide low cost operation and minimal maintenance.

High pressure compressors are used in a variety of applications. Many owners, operators and designers of high pressure compressed air or gas systems rely on Parker’s Finite Filter Operation for high efficiency filters. End users of high pressure compressed air, such as scuba divers and fire rescue workers, depend on high quality breathable air.   Throughout the stages of compression many contaminants can enter into the system. Excessive amounts of liquid aerosols, primarily lube oil carryover and solid particulate contamination are common in high pressure systems. In addition, higher temperature levels are possible and may cause liquid oils to varnish. This contamination can lead to poor component performance and wear that may lead to unscheduled maintenance. Even submicronic contaminants in compressed air or gas systems can foul multistage compressors, increasing maintenance costs and impacting product quality.

The Parker domnick hunter Air Treatment Units (ATU) are compressed air railway dryers fitted with associated filtration. Designed to remove bulk oil, oil aerosols, bulk water, dirt particles and water vapour from railway industry compressed air systems, providing the highest quality compressed air to applications which depend upon clean dry air for their reliable operation. As the patented design is modular in construction, the ATU can be designed to meet the specific dewpoint requirements for the application at the specified worst case operating parameters. This filter type utilises a very high efficiency coalescing element comprising of several layers of very fine borosilicate glass micro-fibre which captures dirt particles down to 0.01 micron in size and removes oil aerosols down to 0.01 mg/m3 @ 20°C (68°F). Coalesced liquid condensate collects in the base of the filter housing where it is automatically removed from the system by a solenoid operated / timed drain valve

 Compressed air contamination problems can be simply avoided by installing a Parker domnick hunter PNEUDRI MIDIplus High Efficiency Compressed Air Dryer package fitted with OIL-X EVOLUTION filtration. The packages are suitable for use with any compressor type and are suited to point of use applications. Compressed air purification equipment must deliver uncompromising performance and reliability whilst providing the right balance of air quality with the lowest cost of operation. Many manufacturers offer products for the filtration and purification of contaminated compressed air, which are often selected only upon their initial purchase cost, with little or no regard for the air quality they provide, the cost of operation throughout their life or indeed their environmental impact. When purchasing purification equipment, delivered air quality, the overall cost of ownership and the equipment’s environmental impact must always be considered.

Protect the Environment and your investment The compressed air that comes out of a compressor is generally too humid, contaminated and sometimes too hot to be introduced directly into the distribution network without suitable treatment. The various processes which the compressed air thus undergoes generate condensate, which has to be discharged from the network and suitably treated before being released into the environment.   The Parker Hiross range of solutions for condensate treatment includes: • Hyperdrain condensate drains: -electronic with zero air loss: HDE-X -mechanical with zero air loss, also suitable for high pressure applications: HDF -timed: CDV and HTD -built-in with zero air loss: HDI  

This partial list of applications for Parker “CN” series filters has a common factor, the need for an economical, medium pressure range filter with excellent fatigue pressure ratings. Prior to the availability of the “CN” filter, applications were restricted by limitations of a spin-on can, or forced into the higher cost range of high pressure filters.   The “CN” series fills this gap, and now with the newly increased fatigue rating from 550 to 800 psi, the applications are expanded   Ecoglass III Replacement Elements   Ecoglass III represents the merging of high performance filtration technology with environmentally conscious engineering. The Ecoglass III line of replacement elements feature 100% non-metallic construction. The design reduces solid waste and minimizes disposal costs for industry. The non-metallic construction means lightweight elements (60% less weight) for easier servicing.   The Ecoglass III elements utilize the same proprietary media design as our Micro glass III line of replacement elements. With Ecoglass III, a reusable core is installed into the filter housing and remains in service throughout the life of the assembly.

The origins of modern compressed air filtration can be traced back to domnick hunter in 1963, it was the first company to use Microfiber filter media for purification applications, changing the compressed air industry forever. The OIL-X filter range was the first filter range to fully utilise this groundbreaking technology and has always been synonymous with high quality compressed air. Now in the 21st century, the OIL-X name remains, but the technology has evolved beyond recognition. Parker domnick hunter OIL-X EVOLUTION  Since the introduction of the first OIL-X range, Parker domnick hunter has continued to develop both the compressed air filter and the standards governing compressed air quality. Constantly innovated, OIL-X EVOLUTION has become the leading technology for compressed air filtration, providing the exact balance between air quality, energy efficiency and low lifetime costs.

PNEUDRI modular compressed air dryers a dedicated solution for every application  By combining the Proven benefits of desiccant drying with modern design, Parker domnick hunter has produced an extremely compact and reliable system to totally dry and clean compressed air.   The Parker domnick hunter PNEUDRI ranges of heatless and heat regenerative dryers have proven to be the ideal solution for many thousands of compressed air users worldwide in a wide variety of industries. Compressed air purification equipment must deliver uncompromising performance and reliability whilst providing the right balance of air quality with the lowest cost of operation.

Finite’s FFC-110 is often used onboard CNG (compressed natural gas) powered vehicles to prevent contaminants in the fuel tank from getting into the engine, protecting critical engine components, like fuel injectors. Its small size allows for versatile installation and easy servicing. Each housing is powder painted for long-term corrosion protection. These coalescers are ideal for operating environments up to 500 PSIG. Coalescing efficiencies of 95% (grade 10) or 99.97% (grade 6) can be chosen to match the filter to the application. Both the FFC-110 and FFC-110L have an 1/8" NPT drain port with a brass petcock manual drain.

  In recent years, employers have become increasingly aware of their responsibility to comply with International Breathing Air Standards. The standards define the quality of breathing air that must be provided to operators working in contaminated environments.   With a wide variety of purification products available, ranging from a simple respirator offering basic protection against low levels of dust particles to self contained breathing apparatus, it is essential that the inhalation risks be fully assessed and a suitable purification product selected.

Biogas, originating from bio-mass is gaining increasing worldwide importance as a recognised renewable energy source. Biogas production can and will contribute in a significant way to future energy supplies, replacing more and more existing fossil-fuel sources such as coal, oil and natural gas. Extensive promotion schemes throughout many countries in Europe, spearheaded by Germany, will lead to the production of biogas being perfected.   Building on over 30 years of experience in the field of compressed air and gas treatment, Parker Hiross Zander exhibit extensive know- how when it comes to filtration, moisture removal, cooling and the drying of bio-, sewage- and landfill gases.  

Balston Gas and Liquid Sample Analyzer Filters protect analyzers from sample impurities by removing solids and liquids from gases with 99.999% efficiency at 0.01 micron. Balston Sample Filters offer liquid filtration to 1 micron or lower. Composed of borosilicate glass microfibers with a resin binder, Balston sample filters are inert to most any gas or liquid.   To satisfy the extremely wide range of requirements for analyzer sample filters, Parker Balston supplies a complete line of filter housings in stainless steel, polypropylene, and other corrosion resistant materials, as well as a choice of high efficiency filter elements which are inert to most all liquids and gases.