Vertical Pumps Dealers in Mumbai

• Driven Type: Electric
• Phase: Three Phase
• Speed: 2500-4000 Rpm
• Usage/Application: Industrial
• Motor Horsepower: 0.5 HP to 5 HP
• Flow: 0 -8 m3/hr
• Voltage: 380 V

Inline pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and service-in-place (CIP/SIP) characteristics. Rotary pumps can handle solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure, too, so output is constant and continuous. Rotary pumps also offer superior CIP/SIP performance. Once in line, they can be cleaned without being removed. Depending on the application, it is a good idea to check with the manufacturer to make sure if a particular lobe pump meets both 3-A requirements. As a general rule, rotary pumps require very little maintenance. Some manufacturers offer pumps that allow for seal servicing and maintenance with the pump in line. Applications Food processing. Beverages. Dairy Produce. Personal Hygiene Products. Pharmaceutical. Biotechnology. Chemical. Industrial. Medium and heavy duty cycles.

• Material: Polypropylene
• Shape: Vertical
• Color: Yellow, White, Red
• Condition: New
• Automatic Grade: Semi Automatic, Manual, Fully Automatic

In Industries like Conc. Hcl loading & unloading of road tanker. Scrubbing of corrosive gases like Cl2, Br2, F2, I2, SO3, CO2, NH3 Water Treatment Effluent Treatment Electro Plating Pickling in Steel Rolling Mills Descaling VPump body in Stainless Steel. Impellers & Diffuser in polycarbonateNoryl. Motor shaft in stainless steel AISI 420. Flanges suction & discharge mountings in grey cast iron. Mechanical seal in graphite and ceramic. Motor housing in Aluminum.

We introduce ourselves as manufacture of s.s.lobe pump for transfer viscous liquiddesigned and manufactured to transfer a several type of liquids in pharmaceuticals, dairy, chemicals, food processing, beverages, oil, organic solvents, pulp plant, confectionery, mineral water and other allied industries.

• Application: Ground Water Supply
• Voltage: 110V
• Fuel: Electric
• Automatic Grade: Automatic
• Power: 1-3kw
• Pressure: 10-20bar

These Vertical Submersible Pump are developed for metal rolling and rod drawing industries for pickling purpose, pumps are rigid in construction and made out of pe-uhmw polymer, shaft is protected by poly propylene sleeve which avoid the pump shaft to come in contact with the medium to be pumped through pump. Insuring higher life of pump, oil housing is eliminated with grease lubricated bearing housing, pump comes in 2 h.p., 3h.p. and 5 h.p, 1440 r.p.m. or 2900 r.p.m. Applications : Storage of water Water Supply Transporting Water Pickling plants Scrubbers Transferring various chemicals Circulation of various fluids

• Pressure: Up to 5 kg / cm2
• Application: Effluent Treatment, Filter Press For Dyes And Chemical, Water Treatment Plants, Scrubbing Corrosive, Food processing, Drugs And Pharmaceuticals, Fertilizer Plants, Pickling Plants.
• Brand: Gipfel Engineering
• Head: Up to 60 Mtrs
• Capacity: Up to 70 m3 / hr
• Temperature: Up to +140 Deg C
• Speed: 960 / 1450 / 2900 RPM at 50Hz & 1150 / 1750 / 3500 RPM at 60Hz
• Hardware MOC: P.P. (Polypropylene), PVDF, UHMWP

• Certification: CE Certified, ISO 9001:2008
• Color: MUlticolor
• Voltage: 110V, 220V
• Power: 1-3kw, 3-5kw, 7-9kw
• Warrenty: 5 Years
• Country of Origin: India
• Number Of Stages: Single-stage Pump
• Motor Phase: Three

• Capacity: Upto 200 m3/hr
• Motor Horse Power: 20 - 140 HP

• Type: Vertical
• Certification: CE Certified
• Application: Industrial
• Voltage: 220V
• Fuel: Electric
• Automatic Grade: Automatic
• Power: 1-3kw
• Warranty: 1 Year

Salient Features : Pump Available in SS 316(CF 8M) Investment Casting - High Efficiency, better surface finish & Back Pullot Design. Accurate alignment of Impeller to casing provides maximum Hydraulic efficiency. Arrangement for cooling Seal or Packing at elevated temperature in SS series. Removable SS Shaft Sleeves Simplifies maintenance. Maximum Sealing Flexibility - any type inside or outside single or double. Mechanical Seal almost any mechanical Seal will fit.

The pump is in vertical design located below/alongside the drowning vessel and is fitted with a unique mechanical seal system that outsmarts the sealing arrangement of a conventional horizontal centrifugal pump. The current version of the pump has evolved after extensive usage and after taking into consideration the suggestions of a host of plant personnel from the user industry . Advantage: This unique design caters to the initial fast-filling requirement of the filtration process while ensuring automatic gradual reduction of the flow rate towards the end of filtration cycle. Unlike a horizontal pump, this vertical pump is not amenable to any damage at the end of filtration as the excess flow is fed back to the suction stream through the overflow port which acts as an in-built bye-pass system.        The mechanical seal is under slight vacuum when the pump is in operation; this action keeps the solids-entrained fluid away from the seal faces thus increasing seal life. Even during seal failure, the pump does not suffer from any breakdown problem as the corrosive fluid does not spill out allowing filtration operation to continue unhindered.

Materials : PP, PVDF, PVC, SS316. Flows upto 160m /hr, Head upto 65 mWc, Temp. upto 100 C. 3 pump ranges, column lengths in steps from 275 mm to 4000 mm. Immersion Depths : upto 3000 mm (with suction extension upto 4000mm). Powered by std. 3-phase, IS 325, IEC Fr. Elec. motors. Ideal for transfer of acids, alkalies, sewage. With static-dynamic vapour seal & plain/flushed bearings. Applns : Chemical industry, Galvanic industry, Water treatment, Surface treatment, Gas scrubbing plant, PCB manufacturers, Waste water. Available in PP / PVDF / PVC materials. Flow rates upto 70 m3/hr & Head upto 40 mts. Applications : Electroplating, Paint Shop, Galvanising, ETP waste transfer, Specialty Chemicals, etc.

• Country of Origin: Made in India
• Type: Electric
• Number Of Stages: Single-stage Pump
• Motor Phase: Three Phase
• Brand: LUBI
• Motor Horsepower: 150 HP

Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design. Features:  Vibration-free performance Low submergence No priming required Dry pit/Wet pit arrangement available Direct drive/Right angle gear drive Impeller pull-out/Non-pull-out Bowl pull-out/Non-pull-out Gland packed / Mechanical seal 50Hz / 60Hz availability   Application: Water supply Pumps Irrigation Pumps Cooling tower Thermal and Nuclear power plants Steel, Cement industries Refineries Sea water on off-shore platforms Condensate extraction Fire fighting Pumps Flood control Dry Docks   Specification: Delivery size up to 2200 mm Capacity up to 40,000 m3 /hr Head up to 200 m

Red Jacket Submersible Turbine Pumps (STPs) are the most widely installed submersible fuel pump in the world. That�s because Red.

Vertical In-Line pumps designed for minimum space requirement with easy Installation.Coupled with TEFC motor with ‘F’ class insulation with temperature rise limited to class ‘B’. Features :  Volute & adapter fitted with Bronze wear-ring  Suitable up to 110o C water with special mechanical seal  Capacity up to 1400 LPM  Head up to 30 meters Applications :  Closed Loop Water Circuits  Industrial Water Supply  Cooling Towers  Air Conditioning Plant  Cold Storage Plant  Sprinkler System

• Structure: Single-stage Pump
• Warranty: 12 months
• Theory: Vertical
• Pressure: High Pressure
• Application: for industrial use
• Usage: industrial
• Place of Origin: Maharashtra, India
• Packaging Details: Fumigated Export Worthy Wooden Box With Bolting Systems
• Supply Ability: 20 Set/Sets per Day Vertical pumps
• Standard or Nonstandard: Standard

ALS Vertical Lobe Pump, is popular for its high performance, cost-effectiveness, and maximum output. Our clients have been very grateful of our exquisite range of products, and the credit goes to our production unit and a qualified team. We value client satisfaction and make the pumps using the finest raw materials. While this item can be bought at lower rates, we source these from authentic vendors in the market. We are based in Mumbai, Maharashtra, India.

• Suction Size: Up to 200 mm
• Capacity: Up to 400 m³/hr (6,600 LPM)
• Head: Up to 60 mts.
• Material of Construction: C.I. / Ni C.I. / Ni Hard / C.S. / SS-304 & 316 / SS-316 L / Alloy-20

Single Stage Vertical Centrifugal pumps mounted on heavy duty surface plates. These pumps are suitable for handling liquids from wet and dry pits up to 5 mts. sump depths. Features Available with: Special line bearings for low vibration and longer life Semi-open impellers for pumping slurries / sludges Mechanical seals for pumping chemicals & petrochemicals Generally conforming to API 610 specifications Applications Light petroleum products Industrial waste Sludges / Slurries / Sewage Chemicals