Veterinary Syringe Dealers in Mumbai

• Application: Industrial Use
• Data Log Event: 500 data log events in real time
• Syringe Capacity: 5 to 60 ml
• Flow rate range: Up to 2000 ml/hr.
• Drug Library: 64 Drugs (User editable)
• Features: Multi Angle Pole Clamp, Stacking Facility Up to 3 Pumps

Aspire Syringe Infusion Pump : The IMAC304DR is an integrated Linear Peristaltic Infusion System comprising a computerized infusion pump and a drop sensor. The system utilizes a microprocessor to retain correct infusion rates and activate alarm when fluid flow varies from the set rate. The pumps contain a pump assembly, which holds the IV administration tube and infuses fluid to the patient at set rate. If the actual drop rate differs from the set rate by more than 2%, the pump stops infusion. The pump monitors the drop rate through a drop sensor placed below the solution container i.e. on the drip chamber. During infusion, drops passed the sensor, which emits a low power beam to detect the drop. The sensor continuously relays this information to the pump. If the number of drops deviates above or below the set infusion rate, the pump activates the appropriate audio –visual alarm, such as HI-FLOW or LOW-FLOW and stops infusion. Key Features : Front loading of syringe Auto detection of syringe Cupacity Works with standard and widely used brands of syringes BD, Braun, Dispovan etc. Option for 2 customized set as per user choice Syringe Capacity - 10, 20, 30, 50/60 ml Manual clutch release mechanism Auto volume detection Occlusion pressure 3 level selectable Facility to change the parameter during infusion without interruption Communication port - RS 232C and optional RS 485 Electrical stacking up to 8 pumps Long rechargeable battery backup Easy replacement of battery and power supply card in case of failure 4 digit seven segment high bright LED display CE certified

Syringe Pump 860 Features EMCO – Syringe Infusion Pump Infusor 860 is designed for the administration of Anti-Cancer Drugs, Oxytocics, Chemotherapy Medication, Anaesthesia and Life Saving Drugs Front loading of Syringes for easy syringe placements Bright Blue LCD with white characters for easy viewing Built-in Microprocessor surveys all operating and alarm parameters Self diagnostic facility – checks AC Mains and also prompts the user in case of Wrong entry Simply start the pump by selecting the syringe and entering the rate Titration - Only two actions to change the flow rate whilst infusing Accepts syringes from 10, 20, 30, 50/60, 100 ml of major Indian brands such as dispovan, BD, Romsons, etc Wide range of flow rates from 0.1 ml/hr to 400 ml/hr. Infusion Can be programmed in time (hr, min, sec) High Volumetric Accuracy over the entire delivery range Delivery of fluid at quick rate using Bolus facility. Bolus delivery can be Automatic or Manual Bolus rate up to 1700 ml/hr for 100 ml Syringes & 1000 ml for 50/60 ml Syringes “Anti-Bolus” system for patient safety 3 level Occlusion Pressure settings (High/Med/Low) Display of Vital Parameters such as Rate of Infusion, Cumulative Volume Infused and Time of Infusion on LCD Backlit Display Audio and Visual alarms to indicate Occlusion, Near end infusion, Syringe empty, End of Infusion, KVO, Low Battery, Insert Syringe, No Mains etc Battery operation possible for Emergencies and Transport. LED indication for battery and mains operation Fluid entry proof control panel to avoid damage to interior circuitry and malfunctioning of the pump Ideally suitable for OT, ICCU, NICU, PICU, Pain Management, Ambulance, etc More than 8000 installations of Syringe Pumps all over India

• Weight: 2kg, 3kg
• Syringe Size: 5, 10, 20, 30, 50, 60
• Infusion Mode: Time Mode, Dose Mode, Rate Mode
• Display Type: Digital
• Accuracy: - +2%

• Country of Origin: India
• Type: Veterinary Instruments
• Material: NYLON
• Length: 2 / 5/ 10 / 20 / 30
• Application: Veterinary Use
• Color: MILKY WHITE
• Feature: Best Quality, Easy To Use, Fine Finished, High Durability, Light Weight
• Surface Finishing: Polished
• Opening Style: Single
• Instruments Type: NYLON SYRINGES
• 2 cc: 70.00rs
• 5 cc: 80.00rs
• 10 cc: 90.00rs
• 20 cc: 100.00rs
• 30 cc: 120.00rs

A syringe driver or syringe pump is a small infusion pump (some include infuse and withdraw capability), used to gradually administer small amounts of fluid (with or without medication) to a patient or for use in chemical and biomedical research.Designed for high performance, unsurpassed accuracy and the highest safety in syringe-based drug delivery For administration of fluids in nutritional therapy and infusion technique as well as for home care applications It is designed to deliver drug at a predetermined rate and speed.

• Type: Automatic
• Application: Hospital
• Weight: 10-20kg
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1 Year
• Certifications: CE Certified

• Size: 0.5ml
• Type: Glass
• Brand Name: Truth
• Certification: Certificate of Surveillance Completion
• Color: Clear
• Model Number: 70-02-22-29
• Place of Origin: Mumbai
• Properties: Glass & Metal
• Certificate: ISO

Product features • excellent reproducibility, reliable volume selection • good plunger tightness without o-ring • autoclaved fully assembled at 121° c (20 minutes) • low maintanance, ready to use • simple natural movement product description durable ergonomic finger non-fatiguing one-handed operation.syringes assemblies are made of chrome plated brass rings and thumb rest allow for easy dispensing. Automatic return of spring loaded plunger to preset volume for quick repeat dispensing simple screw adjustment for accurate volume setting filling assembly attachment enables continuous self refilling from single reservoir and repetitive delivery of preset volumes. Repetitive accuracy ±1% unique design of metal bivalve and sinker ensures smooth, leak proof liquid transfer effortless, high throughput vaccination from small to large animals animal injection & sterile work suitable for most liquids and suspensions & operate under any climatic conditions superior, long-lasting quality economical parts, all interchangeable & easy to disassembling and maintenance the davinci can be autoclaved fully assembled at 121° c (20 minutes) each davinci feed tube set - utility contains durable spring loaded assemblies: metal body, luer lock nozzle, plunger, glass barrel, integrated vlave system, feed tube, sinker valve, feed tube, feed cannula, spare kit (spring, valve, balls & washer), detailed operating manual & reusable needles.

• Material: Plastic
• Shape: Cylindrical tube

• Weight: 2.2kg (net weight)
• Unique Human Voice Alarm system: The device triggered the human voice prompt and stop injection automatically when there is any malfunction, making the infusion process safer and more reliable.
• Rate:: 50/60ml Syringe: 0.1ml/h
• Flow Rate Accuracy: Within ±3% (after correct calibration)
• Mechanical precision: Within ±2%
• Bolus Rate: 50/60ml Syringe: 1,200ml/h 30 ml Syringe: 720ml/h 20 ml Syringe: 480ml/h 10 ml Syringe: 240ml/h
• Purge Rate: 50/60ml Syringe: 1,500ml/h 30ml Syringe: 900ml/h 20ml Syringe: 600ml/h 10ml Syringe: 300ml/h
• Volume Limit: 0.1ml
• Total Injection Volume: 0.1ml
• Occlusion of Single Channel Syringe Pump: High: 800mmHg ±200mmHg (106.7kPa±26.7kPa) Medium: 50/600mmHg ±100mmHg (66.7kPa±13.3kPa) Low: 300mmHg ±100mmHg (40.7kPa±13.3kPa )
• Alarms: Injection soon finish, end of injection,occlusion, improperly installation of syringe, wrong setting, low battery, syringe loose etc.
• Power Source: AC 100V
• KVO rate: 1ml/h
• Fuse: F1AL/250/60V, 2pcs inside
• Power Consumption: 30VA
• IP Classification: IPX4
• Equipment Classification: Class II, internal power supply, Type CF
• Operating Condition: Ambient temperature: +5℃
• Relative humidity: 20
• Transport & Storage Condition: Ambient temperature:-30℃
• Relative humidity: ≤95%
• Dimension: 280mm (L) ×210mm(W) ×130mm(H)

Syringe Pump is a programmable, accurate pumping instrument. It is an ideal instrument for accurate transfer of various kind of liquids, even most aggressive ones. The basic construction consists of the controller unit and pump unit The syringe pump motor moves the pusher block forward which depresses the syringe plunger causing the dispensing of fluid. The system can be controlled via a local keyboard and LCD display or through a RS 232 serial bus using a computer.

• Weight: 2kg, 3kg
• Warranty: 1 year
• Syringe Size: 5, 10, 20, 30, 50, 60
• Brand: Bio-X
• Infusion Mode: Rate Mode, Time Mode, Dose Mode
• Display Type: digital
• Dimension: 26x21.5x11, 32x21.5x20
• Power Supply: AC 100-240V, 50Hz/60Hz
• Battery Type: Lithium battery, 11.1/2000mAh
• Alarm: yes
• Accuracy: 2
• Certification: CE
• Purge Rate: 5ml Syringe 150ml/h; 10ml Syringe 300ml/h; 20ml Syringe 600ml/h
• Volume Limit: 0-9999.9ml
• KVO Speed: 0.1-5.0mlh
• Power Consumption: 30V, 45V
• Infusion Rate: 30ml Syringe 900ml/h; 50/60ml Syringe 1200ml/h
• Usage/Application: Drug Delivery

Syring Infusion Pump INFUSOR 850 is manufactured in association with Viltechcmeda (AITECS), Europe is & is designed for the administration of Anti-cancer Drugs, Oxitocics, Chemotherapy Medication, Anesthesia and Life Saving Drugs. Fully Microprocessor controlled. Built-in Microprocessor surveys all operation and alarm parameters. Self diagnostic facility-checks AC mains and also Prompts the user in case of wrong entry. Simply Start the Pump By Selecting The Syringe and Entering The Rate. Self diagnostic facility-checks AC mains and also Prompts the user in case of wrong entry. Demands Only Two Actions to Change the Flow Rate Whilst Infusing. Accepts syringe from 10ml to 60ml of major Indian Brands like Dispovan, HRJ, Medisafe as well as imported brands such as Terumo, Braun, BD etc. Wide range of flow rates from 0.1ml/hr to 200ml/hr. Infusion can be programmed in rate(ml/hr) as well as in time(hr, min, sec) High Volumetric Accuracy over the entire delivery range. Delivery of fluid at quick rate using Bolus facility .Bolus facility can be Automatic or Manual. Bolus up to 1000 ml/hr for 50/60ml Syringes. 3 level occlusion Pressure setting. Display of Vital Parameters such as Rate of infusion, Cumulative Volume Infused and Time of Infusion on LCD Backlist Display. Audio and visual alarms to indicate occlusion, near end Infusion, syringe empty, end of infusion, KOR, low battery, insert, syringe, no mains etc. Battery operation possible for Emergencies and Transport.LED indications for battery and mains operation.Fluid entry proof control panel to avoid damage to interior circuitry and malfunctioning of the pump. “Anti –Bolus” system available. Ideally suitable for OT, ICCU, NICU, PICU, Pain management etc.

Features: * Function to remove bubbles in the tube fast * Function to handle fast speed and large volume (bolus) * The system automatically opens up KVO after injection (reopens vein circulation) * Function to Preset Solution Volume: The user can preset the solution volume. The machine will automatically stop and start the KVO function once the preset solution volume is finished * The machine automatically records the setting for last injection. It greatly reduces users’ workload * Function to Auto-Define a Syringe : Complete calibration technology for syringe brand definition that ensures the compatibility of any brand of syringe and injection accuracy * Prompt alarm will sound when injection is almost done; injection is finished, preset dosage is done, injection blockage occurs, syringe device is improperly installed, a wrong speed is set, AC power is unplugged, battery is close to zero. * Freely Stackable : you freely stack one onto another to provide multiple solutions, combination solutions has a wide range of clinical applications

Syring Infusion Pump INFUSOR 850 is manufactured in association with Viltechcmeda (AITECS), Europe is & is designed for the administration of Anti-cancer Drugs, Oxitocics, Chemotherapy Medication, Anesthesia and Life Saving Drugs. Fully Microprocessor controlled. Built-in Microprocessor surveys all operation and alarm parameters. Self diagnostic facility-checks AC mains and also Prompts the user in case of wrong entry. Simply Start the Pump By Selecting The Syringe and Entering The Rate. Self diagnostic facility-checks AC mains and also Prompts the user in case of wrong entry. Demands Only Two Actions to Change the Flow Rate Whilst Infusing. Accepts syringe from 10ml to 60ml of major Indian Brands like Dispovan, HRJ, Medisafe as well as imported brands such as Terumo, Braun, BD etc. Wide range of flow rates from 0.1ml/hr to 200ml/hr. Infusion can be programmed in rate(ml/hr) as well as in time(hr, min, sec) High Volumetric Accuracy over the entire delivery range. Delivery of fluid at quick rate using Bolus facility .Bolus facility can be Automatic or Manual. Bolus up to 1000 ml/hr for 50/60ml Syringes. 3 level occlusion Pressure setting. Display of Vital Parameters such as Rate of infusion, Cumulative Volume Infused and Time of Infusion on LCD Backlist Display. Audio and visual alarms to indicate occlusion, near end Infusion, syringe empty, end of infusion, KOR, low battery, insert, syringe, no mains etc. Battery operation possible for Emergencies and Transport.LED indications for battery and mains operation.Fluid entry proof control panel to avoid damage to interior circuitry and malfunctioning of the pump. “Anti –Bolus” system available. Ideally suitable for OT, ICCU, NICU, PICU, Pain management etc.

Intuitive and user friendly operation. Simple entry of parameters via numeric keypad Expanded maximum infusion rate unto 1500 ml/h. With the Syringe Size Detector and with High Flow Rate should be of per 950 Intuitive and user friendly Operation. Simple entry of parameters via numeric keypad. Expanded maximum infusion rate unto 1500 ml/h. Automatic and manual bolus modes. Set-up menu enables customization of the pump. Anti-bolus and anti-siphon functions increase patient safety. Titration allows to change the infusion parameters without interruption of infusion. Accepts syringe from 5ml to 50/60ml of all majors Indian Brands like DISPOVEN ROMSONS as well as all imported brands. The drug library contains 15 drug names and can be updated by the physician. Syringe pump can be quickly started within 3 steps by selecting syringe & infusion rate. Automatic syringe volume detection.

• Features: user-friendly touch-screen display, Full touch-screen enables.
• Flow rates: from 5 pL/min to 220 mL/min
• Accuracy: ±0.3%

  POSITIVE DISPLACEMENT SYRINGS PUMPS   PDC's syringe pumps are designed to deliver liquids at a constant flow rate and a constant output pressure. Fluctuations in the flow rate and output pressure are minimal. We design simplex and duplex for batch and continuous operations. Accuracy and repeatability of flow is 0.05%.       In a simplex syringe pump, a fluid contained in a body or pump head is forced into the process system with a plunger. A syringe pump is a type of positive displacement pump. Syringe pumps excel at injecting fluid at a volumetric flow rate (generally slow) without generating any pressure pulsations. Depending on seal design, syringe pumps are capable of pumping to very high pressures (up to 60,000 psig /4,100 barg).       Two simplex pumps can be coupled together to create a continuous pulse-less feed duplex pump.     BARREL SIZE     Barrel sizes range from 125cc to 1500 cc and can be built in accordance to customer specified materials, which are compatible to the process. For example, stainless steel, Inconel®, Monel® or Hastelloy®.         FLOW RATES     The output flow rate can be adjusted to any desired value within a specified range. Flow rates can be entered via the operator inter-face. This flow control system is calibrated specifically to each pump. Please refer to the Specifications section for a selection of typical flow rate ranges (up to 400 ml/min).           PDC's syringe pumps will displace any liquid that can be moved into the pump head. Limitation on the liquid may include ones with abrasives or suspended particles. The pump is certainly capable of moving liquids with abrasives and suspended particles, however, abrasives may shorten the seal and plunger life, and the particles may fall out in the pump head since a syringe pump has a slow moving plunger.         INSTRUMENTATION     The extent of instrumentation typically depends upon the customer's requirements. PDC can provide basic or very sophisticated control packages can tailor these systems to the customer's needs. This flexibility prevents the user from being forced into using an off the shelf pump with a fixed configuration.   APPLICATIONS     PDC's pulse-less, continuous feed syringe pumps are ideal for use in laboratories, pilot plants and industrial production applications when there is a need for:       • Consistent & extremely accurate pulseless flow • Constant output pressure • Rugged & continuous duty operation OUR CLIENTS     Our clients include:     • Atofina • E-Ink • Air Liquide • ExxonMobil • Aristech • Lucent Technologies • Dupont • Texas Petrochemicals • Nova Chemicals        

We are one of the famous company, who are manufacturer of syringe infusion pump

medical syringe pump, compact syringe pump, automatic syringe pumps

precision high pressure syringe pump, Electronic Detectors

Syringe Pump, Refurbished MRI Machine, Ecg Machine, Suction Machine

Syringe Pumps, Defibrillators, dialysis machines, ECG Machines

syringe infusion pumps, Pulse Oximeters, ECG Machines, dopplers

Syringe Infusion Pump, Blood Transfusion Set, Ambu ECG Electrodes

Electric Syringe Pump

Syringe Pump, Chemical Machinery, Heat Exchanger, mixing systems

veterinary syringe, Plastic Kerosene Pump, Pilfer Proof Caps

Syringe Pump, Dental Products, Surgical Products, Scalp Vein Set

veterinary syringe, Veterinary Medicines, veterinary vaccines