Vibrating Feeder Dealers in Mumbai

Vibratory Feeder (Electromagnetic Type) Vibratory Feeder ( Permanent Type) Parts Feeder Pneumatic Vibrator Vibratory Conveyor Compacting Table Bin Vibrator Powder Filling Machine

Electromagnetic vibrating feeders are equipped with electromagnetic drives which generate vibrations required for conveying of material. The electromagnetic drives are robust in construction with very high reliability factor. These conveyors come with a specially manufactured controller required for operation of the electromagnetic conveyor. These controllers convert the input AC supply voltage into pulsating DC output which results in generation of vibrations. A thyristor such as a silicon controlled rectifier is used for this purpose. The fringe angle of the SCR can be varied sleeplessly using a potentiometer or an analogous electrical signal / PLC signal from an external command variable unit, which in turn increases / decreases the amplitude of vibrations thereby controlling the output of the conveyor as required.             As in the case of electromechanical feeders depending on the material conveyed, the conveyors can be supplied on two types viz, through type and tubular type. Suitable liners in case of through conveyors are provided where severely abrasive materials are handled as in the case of electromechanical conveyors.  ADVANTAGES       Easy & stepless variation of delivery of material either manually or automatically possible.               Delivery remains generally constant in spite of fluctuations in supply voltage       ( + 10% for voltage variation & + 3% for frequency variation.)               Drive is extremely robust and simple in construction.               Electromagnetic drive is dustproof and is impervious to moisture

Vibratory conveyors find wide application in cement plants, steel plants, fertilizer industries, pharmaceutical industries, glass industry etc, where controlled feeding of material is required. These conveyors have proved their reliability in transporting bulk material over limited distances.         Depending on requirement and applications vibrating conveyors are available in electromagnetic & electromechanical types. Electromagnetic conveyors make use of an electromagnetic drive for generation of vibrations whereas electromechanical conveyors are powered by two unbalance motors rotating in possible directions. Electromagnetic vibrators are used in applications where stepless variation of feed rate from 0-100% is required. On the other hand electromechanical vibrators are used where the feed rate is not required to be changed frequently during operation or where a relatively constant feed rate is required.       Electromechanical vibrating feeders are powered by two unbalance motors which rotate in opposite directions. These types of feeders can be supplied in two types viz, through type and tubular type depending on the type of application and material being conveyed.

• Type: GZD
• Application: Mining, chemical industry, construction, etc.
• Supply Ability:: 2 Set/Sets per Week
• Port: Qingdao,Tianjin, Shanghai or others
• Materials:: Quartz, limestone, granite, basalt, coal gangue

Vibrating feeder is one key machine used for conveying the raw material whose size is the cube to the feed inlet with the smooth speed.Feeder machine applied in the sand production line and stone production line can feed the raw material for the crushing machine and sand maker, which can be widely applied in the industries such as the sandstone producing, ore dressing, building material and the chemical industry. Vibrating grizzly feeder can produce the centrifugal force by the eccentric rotor, which can make the sieve compartment to be one circle movement and the material can be conveyed to the feed inlet with the movement of the vibration of the sieve compartment. This product has the advantages such as simple structure, easy operation, low energy consumption, good continuity, low noise and credible operation, and its feeding capacity can be adjusted according to the practical demand of the clients. CME Mining Machinery is one major feeder manufacturer, which has the big producing capacity and the perfect sale service, and which has become the leader in the same field of china vibrating feeder, and the element above on can be useful to boost the promotion of mining machine all over the world.

Nawa Engineers models with 800 mm, 1000 mm, 1200 mm, 1350 mm and 1500 mm width and different lengths to suit, Capacity range: 50-750 TPH.

Mitool Make Vibrating feeders are most efficient & economical to convey the bulk materials & in the simplest easiest means of controlling the flow rate.The Vibrating feeders are extensively used in mines, chemicals, ceramic, Rubber, Pharmaceuticals, clay, Iron & steel Industries, collieries, Quarries of glass industries for handling of all type of materials capacities from 1 Ton to 400 Tones per hour.Vibrating Feeders are operated by giving pulsating D.C. supply. When this pulsating supply passed through starter creates a series of interrupted pulls on the Armature. 3000 pulse (Vibration) are occurring in one minute. The Vibrating feeder consists of vibrating trough fitted to the drive unit of considerable weightsThe electromagnet unit is mounted inside a heavy housing unit, The power unit which is mounted inside the housing houses the spring bars (Flats) which consisting of a number of leaf springs clamped at the two ends of the power unit.A heavy fabricated centre piece carries the magnet armature at one end & vib feeder trough at other end. The centre clamp tightens at the middle of the spring bar system .Stiffeners & gussets are provided to make the trough rigid. Our Feeders Protects the belt conveyors from damage by feeding the material on to the belt conveyors from storage hoppers, silos, surge hoppers & dumpers at the controlled rate. In magnetic feeders there are no wearing mechanical parts, such as gears, cams, belt, bearing, eccentrics weights or motors.Mitool Vibratory feeders are most economical equipments.

Vibratory Feeders are ideally suited for controlling the flow of bulk material. Vibrations produced are smooth, uniform, volumetric flow that is fully controlled from coarse to fine. Vibratory feeders are used to control product flow in bulk handling operation such as packaging, batching, mixing, drying, weighing, sprinkling and spreading. We provide Electromagnetic type and Unbalanced Motor vibratory feeders. For vibration control we use Electronic Vibrator card with coarse & fine potentiometer.

Electro magnetic vibratory feeders are capable of conveying bulk material from storage to processing or between processes at continuous controlled rate of flow. It enhances the bulk handling productivity, equipped with a highly reliable electro magnet which produces vibrations for step less conveyance of materials. ss construction for feed pan and hopper bigger hopper gentle but fast vibration micro controller based with digital frequency and on off con.

Features of Vibrating Feeder Stable performance &Reliable operation. Easy to adjust &Easy to maintain Long span life &No pollution with closed body Good performance-conditioning, it can be used in any severe environments

• Applications: plastics, rubber, food, pharmaceutical, chemical, fertilizer, glass

vibratory feeders for feeding fibers, glass fibers, granules, rough-grained powders, and other abrasive or fragile ingredients.

Bevcon wayors Pvt ltd offers a full line of vibrating feeders serving to the core industry like Thermal power, Steel, mining &cement etc. Vibrating feeder is one of the preliminary types of feeding arrangements. The discharge of material is possible through induced vibrations through electrically driven unbalanced motors. It is possible to generate elliptic, circular or linear vibrations through adjustable fly weights attached to the motors. The centrifugal force generated through theses weights is adjustable and hence variation in vibrations is achieved. Accurate discharge control achieved through the adjustment of centrifugal forces.

Features   Stable performance &Reliable operation. Easy to adjust &Easy to maintain Long span life &No pollution with closed body Good performance-conditioning, it can be used in any severe environments Description   Vibrating Feeder is a kind of linear-direction feeding equipment, in the mineral ore &rocks processing plants, it can send materials to crusher evenly and continuously. At the same time, it can screen materials roughly, increasing the practical handling capacity of the whole production line. Application   SBM heavy-duty feeders have good performance in the mining, construction, road building, bridge construction, and quarrying, recycling, aggregates and cement industries. Almost all kinds of minerals &rocks and some other materials processing plants can use the vibrating feeder.

Technical features and advantages Stable performance &Reliable operation. Easy to adjust &Easy to maintain Long span life &No pollution with closed body Good performance-conditioning, it can be used in any severe environments

We have a unique range of Screw Feeders which is highly supreme in its quality. Our range encompasses of twin screw feeders, typical screw feeders etc of premium quality. We have also gained the position of a renowned typical screw feeders manufacturer and exporter from India.

• Brand Name: Vibrant
• Power: 200 W
• Voltage: 240V
• Frequency: 50 Hz
• Usage/Application: Industrial
• Phase: Single
• Operating Temperature: 0 - 60 Degree Celsius
• Hopper Capacity: 5 kg

The electromagnetic vibratory feeder consists of a tray made of mild steel and a body housing the electromagnet. The tray which is connected to the armature of the magnet vibrates as the magnet gets energised. The vibration sets the material in motion. Controlling of vibration gives the controlled flow of the material. The body housing the electromagnet is made in totally enclosed design to prevent dusting. Useful to any continuous process industry where automatic controlled flow of material is required. The electromagnetic vibratory feeder consists of a tray made out of mild steel or stainless steel and a body housing the electromagnet. The tray which is connected to the armature of the magnet vibrates, as the magnet gets energized. The vibration sets the material in motion. Controlling of vibration gives the controlled flow of the material. The body housing the electromagnet is made in totally enclosed design to prevent dust going inside.

The linear vibratory feeders are the natural extension of Bowl feeders and are required to be used when the parts are to be carried over a long distance from the Bowl feeder. Key Benefits Sturdy and robust design! Epoxy Encapsulated Magnet coils for lasting life! Alternating current  Multi magnet system for uniformly distributed vibrations! Electronic solid state controller for adjusting feed rate!