Voltage Tester Dealers in Mumbai

• INPUT:: 230/240 Volts 1 Ph 50 Hz AC
• OUTPUT:: 0-3 kV / 0 – 6 kv One Side Grounded.

3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end.,MCB,Zero Interlock Provided,Fast acting tripping Device

• Brand Name: NMC

The ac dc high voltage test set that we offer to our clients is widely used at electrical maintenance departments and workshops. It is chiefly used to perform routine maintenance of numerous electrical devices and equipment. Apart from that, this product is used to check the quality of insulation provided in any electrical device. the technical specifications of these products are as follows: capacity : 102550100150200m250 ma spelnput : 230v 1ph. 50hz. Ac output: 0-3510255075100 kv one end earthed indication: main"on" & h.t."on" indicating lamps protection: electronic fast acting over current tripping device, sensing h.t. Current directly safety features: zero interlocking is provided for all units metering : 7296 sq. Mm size, voltmetermill ammeter with linear scale to monitor output voltagecurrent.

APPLICATIONS For High Voltage withstand, breakdown testing of electrical insulating systems. For Dielectric Strength testing of electrical / electronic components, small appliances, tools, motors, machines etc. FEATURES Compact & Simple to Operate Zero Interlock for H.V. Output Analog or Digital read outs Adjustable, selectable leakage current. Audio visual indication for presence of high voltage Continuosly variable test voltage Highly sensitive electronics circuit for tripping Avaliabe in AC,DC as well as AC & DC Combined Outputs upto 100KV. Available with built - in printer and or /RS 232 interface. H.V. Test sets of other specifications as per requirement can be supplied. AUTOMATIC VERSIONFollowing parameters can be set by 4x4 matrix keypadA) Output Test VoltageB) Leakage / Trip Current LimitC) Test Duration (Time)HV built in printer, with Rs232 interface & with both the feature are considered as Automatic version HV test set. In Automatic HV Test Set both types like with AC output & with DC output instruments are available.SEMI AUTOMATIC VERSIONFollowing parameters can be set by push button with potentiometer / thumb wheel switch.A) Output Test VoltageB) Leakage / Trip Current LimitC) Test Duration (Time) Once above parameters set and the high voltage is started the instrument will automatically raise the voltage. On reaching of the test voltage, control circuit will start to command to timer. After completion of duration motor will come back. Object Test Fail Indication is given.

• Type: AC ,
• RANGE: 5 KV / 30 mA & 10 KV /30 mA
• DISPLAY: ANALOG METERS FOR KV & mA INDICATION
• TRIPPING: AUTOMATIC
• SAFETY: SAFETY PROBE
• ALARM: AUDIO & LAMP INDICATION

• 230 Volts ± 10%AC, 50 Hz single Phase.: 0-5kV AC, 50Hz.
• One knob manual control, continuously variable through torodial auto transformer.: 2-20-100 mA.
• 3 ranges: 0.1-2mA; 0.1-20mA; 0.1-100mA: Lamps to indicate ‘HV ON’, ‘FAIL’.
• Range: 0.1-5.00 kV Display: LED digital 3 digits Resolution: 0.01 kV Accuracy: ± 3% + 4 digits: Range: 0-2mA; 2-20mA and 20-100 mA Display: LED digital 3.5 digits Resolution: 2mA range: 1uA : 20mA range: 10uA : 100mA range: 100uA Accuracy: ± 3% + 4 digits
• Settable : Thumbwheel switch:1-99 seconds Display: LED Digital 2 digits, countdown. Resolution: 1 second Accuracy: ± 5%: HV switched ON by remote switch. Timer does not funciton in this mode.
• 15 minutes ON / 15 minutes OFF.: 38 x 28 x 19 cm;
• 15 kg: 43 x 33 x 24 cm;

Machine Feature • Digital readouts of test voltage, leakage current and time• Multi-range mA meter• Timer count-down digital display• Digital display to set trip current•‘HV ON’ and “FAIL’ indicators• Panel with legend for controls• Remote control tests via HV probe with switch• Rugged table top cabinet SafetyAll metal cabinetHigh quality double wound HV transformerGood quality components and hardwareExtra EARTH Post Provided Standard Accessories a) Mains cord 2 meter long: 1 Number.b) HV test leads 1 meter long: 1 Set.c) Remote HV test lead with switch: 1 Number.

• Country of Origin: India
• Type: High Voltage Breakdown Tester
• Certification: ISI Certified
• Feature: Easy To Use
• Condition: New
• Power Source: Electric
• Warranty: 1yr
• Operating Current: Single Phase
• Automation Grade: Automatic
• Brand Name: Premier Electrosystems
• Power: 230 V
• Test Voltage: 1, 3, 5, 10 kV
• Test Current: 30, 100, 200 mA
• Timer: Min/ sec/ hour

5 ranges: 250/500/1k/2.5k/5k V DAR and PI calculation Includes leak current, voltage and temperature testing

• Brand Name: neon
• Color: Grey, Sky Blue
• Condition: New
• Automation Grade: Automatic, Semi Automatic
• Certification: ISI Certified, ISO 9001:2008 Certified
• Feature: Easy To Install
• Type: Oil Breakdown Voltage Test Set
• Frequency: 50-100Hz
• Country of Origin: India
• Current Type: Single Phase, Triple Phase
• Production Power: 5 KVA
• Usage/Application: TESTING
• Voltage: 230 OR 440 V AC
• Weight: 80 KG
• Cooling System: Air Cooling, Oil Cooling
• Warrenty: 1yr
• Dimensions: DEPENDS UPON CAPACITY

• Input voltage: 230V ± 10 % 50 HZ
• Output Voltage: As per Table Below
• Output voltage Accuracy: ± 2 %
• Control: Motorized/Manual
• Duty Cycle: 2 minutes ON 15 minutes OFF
• Interlocking: Zero-start interlocking for H.V. output

The Giri Trading Hi-Pot tester HVT series offer wide range of test voltages to determine the withstand capacity of electrical insulation for the normally occurring over voltage transient’s .This series has models which can generate both AC & DC Voltages to eliminate need of two separate kits. The manual / motorized controlled operation provides continuous variable output voltage. The Kits are provided with selectable tripping current to identify breakdown voltage of different test objects. The timer is useful to set duration of test period. HV indication & overload protection provided for safety of operator & Kit.   The HVT is used to verify quality of insulation between any equipments current carrying components & its enclosure or insulation. The high voltage is applied to insulation of equipment under test, as defined as per voltage rating of equipment. The resulting leakage current flowing through its insulation is measured. The set will give trip command if exceeded than its predefined value.   Features Continuously variable motorized/manual output from zero voltage Panel mounted controls and LED indicators. Analog/Digital voltmeter & Ammeter-for easy to read voltage and current Output voltmeter with memory effect-easy to read the voltage after trip Selectable trip current   Application Power Utilities, Substations Transformer, Generator, switch gear testing Bus.bar and Cable testing Domestic appliance testing   Standard Accessories Mains wires 3 cores, 4 meter long. Inter connecting cable 5 meter long. Discharge rod for DC range. Instruction manual.   Safety Specification : Zero start interlock. Audio & Visual alarms. Fast acting over load circuit breaker.

"Delta" H.V. Flash Tester are made heavy duty, keeping in mind long term reliability. Rating are 0 - 5 kV @ 100 mA. Trip current settings can be provided as 25 mA - 50 mA - 75 mA - 100 mA OR 10 mA - 25 mA - 50mA- 75 mA. As an option, a timer can be provided to test an object for a preset time. Most of the capacitors used in the lighting industry are hand made, esp. the metallization of electrodes . The qualitiy of these capacitors change from batch to batch." Delta" has developed a test panel with high discharge currents (up to 10 kA pulse) to test the capacitors samples cyclically for a specified duration. If during this test, any capacitor short-circuits; a lamp- inside the panel will light up. After the test capacitors have to be tested for their impedance by passing the current at rated voltage This is a destructive test; all the capacitors tested on this panel have to be destroyed afterwards & not to be used.

• Feature: 3 ½ digit 0.65” LCD Selectable multi test voltage from 100 V to 1000V DC

3 ½ digit 0.65” LCD. Selectable multi test voltage from 100 V to 1000V DC. AC voltage measurement upto 750V (50Hz to 500Hz) Resistance measurement upto 2000 MOhm. In two ranges of 200 MOhm and 2000MOhm on all test voltages. 1mA short circuit current for faster readings in case of capacitive load. Special low noise leads to eliminate use of seperate guard lead.

• Voltage: 6, 12, 24, 50, 110, 220, 440 V AC/DC.
• Model Name/Number: K-66
• Usage/Application: Industrial
• Brand: Kundip
• Phase: Single / Three Phase
• Battery Any: NO Need

• Max Resistance (G ohms): 60
• Max Voltage (Voltage): 600
• Continuity Range: 50 Ω
• Height (in): 5 51/64
• Width (in): 7 51/64
• Depth (in): 3 13/32
• Digital High Voltage Tester: 120 V

METAL BODY LOW VOLTAGE INSULATION TESTER(FEATURES & BENIFITS):Rugged design to withstand industrial environment Metal body with collapsible Steel handle In-built hand-driven brushless AC generator and static rectifier to supply Stabilized DC voltage Guard terminal to eliminate surface leakage current Cross coil movement, sintered anti-friction bearings and delrin-moulded gears ensures trouble free operation 66mm logarithmic scale confirms to IS 2992-1987 Optional : Voltage measurement up to 500VACDC.

• Voltage: 0 to 5KV AC, 0 to 30mA
• Dimensions: 290 x 250 x 200 mm
• Weight: 12 kg

High Voltage Breakdown Testers are useful for checking breakdown (flash –over) voltages of motors, transformers, pumps, chokes, coils, switches, connectors, plastics, rubbers, PCB’s, insulation materials, electrical and electronic components etc.Automatic tripping facility, HT ON and HT OFF visual indications, HT ON buzzer, high voltage safely probe with push button enable feature, provide operator’s safety. HT voltage and leakage current meters provide continuous reading, simultaneously.

• Power Supply: Rechargeable Battery
• Input: 100
• Output: 24Vdc, 0.62A
• Dimension: 330(L) x 260(W) x 160(D)mm
• Weight: Approx.3760g.
• Adjustable testing duration: 1
• 4 Insulation test voltages: 500V, 1000V, 2500V, 5000V.

• Current: 5 kV AC

• Country of Origin: Made in India
• Color: Black
• Packaging Type: Box
• Material: Mild Steel
• Grade: Semi-Automatic
• Type Of Testing Machines: Eddy Current Dynamometer
• Range: 5KV & 200 Gohm
• Test Voltage: 5000 V
• Model Name/Number: Meco DIT 954 , Rish Insu 10 & Rish Insu 20
• Display Type: Digital
• Load Capacity: 3 KG

• INPUT:: 230/240 Volts 1 Ph 50 Hz AC
• OUTPUT:: 0-3 kV / 0 – 6 kv One Side Grounded.

3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end.,MCB,Zero Interlock Provided,Fast acting tripping Device

• Features: Measure insulation of high-voltage equipment, Diagnose the insulation of various equipment with the built-in memory for data storage.
• Voltage range: Up to 5.00 kV from 250 V DC
• Wide measurement insulation range: Up to 5 TΩ (at 5 kV testing voltage, 1 TΩ=1012 Ω)

• Color: Grey, Black, Light Green, White
• Condition: New, Used
• Feature: Easy To Use, Electrical Porcelain
• Application: Industrial Use
• Voltage: 0-110 V, 110-220 V, 220-440 V
• Driven Type: Electrical
• Packaging Type: Box, Carton

• Feature: Detachable High Voltage Line probe, Drip proof (IP41), Auto-discharge function

• Altitude: Operating below 2000m
• APO Timing: Idle for 15 seconds
• Display: 3 digits 1000 counts Backlight Display (KM 69)
• Low Battery: Below approx. 2.4V (KM 66); Below approx. 2.6V with shaker ON (KM 69)
• Pollution Degree: 2
• Power Consumption: 3mA at power-on ready; 25mA at 1000VAC full LED indication
• Relative Humidity: 20%
• Sensing: Average sensing
• Storage Temperature: -10 deg C
• Update Rate: 5 per second nominal (KM 69)
• Operating Temperature: -10 deg C
• Dimension: 233(L) x 57(W) x 40(H)mm
• Model Name/Number: KM-69/KM-66
• Brand: Kusam-meco
• Weight: Approx. 220gm
• Power Supply: Standard 1.5V AAA battery x 2

• Application: Industrial
• Brand Name: Arun & Sons
• Phase: Single Phase
• Model Name/Number: 214
• Voltage: 5KV-30mA
• Power Supply: Mains Operated

• Usage: 1 to 8 Cell
• Minimum Order Quantity: 1 Unit

• Feature: Audio + Visual indication of status of test LIGHT WEIGHT; Single unit construction.

We are the leading supplier of this products.

• Voltage: 0 – 5 kV
• Current: 0 – 5, 10, 25, 50, 100, 200mAmps
• Time Setting: 0 to 60 Sec.

We are the leading supplier of this products.

This machine uses High voltage to test pin hole in partition and base of plastic molded parts. It can detect pin holes which cannot be seen.