Voltmeters Dealers in Sakinaka, Mumbai (22 products available)

• Input voltage: 230V ± 10 % 50 HZ
• Output Voltage: As per Table Below
• Output voltage Accuracy: ± 2 %
• Control: Motorized/Manual
• Duty Cycle: 2 minutes ON 15 minutes OFF
• Interlocking: Zero-start interlocking for H.V. output

The Giri Trading Hi-Pot tester HVT series offer wide range of test voltages to determine the withstand capacity of electrical insulation for the normally occurring over voltage transient’s .This series has models which can generate both AC & DC Voltages to eliminate need of two separate kits. The manual / motorized controlled operation provides continuous variable output voltage. The Kits are provided with selectable tripping current to identify breakdown voltage of different test objects. The timer is useful to set duration of test period. HV indication & overload protection provided for safety of operator & Kit.   The HVT is used to verify quality of insulation between any equipments current carrying components & its enclosure or insulation. The high voltage is applied to insulation of equipment under test, as defined as per voltage rating of equipment. The resulting leakage current flowing through its insulation is measured. The set will give trip command if exceeded than its predefined value.   Features Continuously variable motorized/manual output from zero voltage Panel mounted controls and LED indicators. Analog/Digital voltmeter & Ammeter-for easy to read voltage and current Output voltmeter with memory effect-easy to read the voltage after trip Selectable trip current   Application Power Utilities, Substations Transformer, Generator, switch gear testing Bus.bar and Cable testing Domestic appliance testing   Standard Accessories Mains wires 3 cores, 4 meter long. Inter connecting cable 5 meter long. Discharge rod for DC range. Instruction manual.   Safety Specification : Zero start interlock. Audio & Visual alarms. Fast acting over load circuit breaker.

• Phase: Single Phase
• Usage/Application: Control Panel

• 230 Volts ± 10%AC, 50 Hz single Phase.: 0-5kV AC, 50Hz.
• One knob manual control, continuously variable through torodial auto transformer.: 2-20-100 mA.
• 3 ranges: 0.1-2mA; 0.1-20mA; 0.1-100mA: Lamps to indicate ‘HV ON’, ‘FAIL’.
• Range: 0.1-5.00 kV Display: LED digital 3 digits Resolution: 0.01 kV Accuracy: ± 3% + 4 digits: Range: 0-2mA; 2-20mA and 20-100 mA Display: LED digital 3.5 digits Resolution: 2mA range: 1uA : 20mA range: 10uA : 100mA range: 100uA Accuracy: ± 3% + 4 digits
• Settable : Thumbwheel switch:1-99 seconds Display: LED Digital 2 digits, countdown. Resolution: 1 second Accuracy: ± 5%: HV switched ON by remote switch. Timer does not funciton in this mode.
• 15 minutes ON / 15 minutes OFF.: 38 x 28 x 19 cm;
• 15 kg: 43 x 33 x 24 cm;

Machine Feature • Digital readouts of test voltage, leakage current and time• Multi-range mA meter• Timer count-down digital display• Digital display to set trip current•‘HV ON’ and “FAIL’ indicators• Panel with legend for controls• Remote control tests via HV probe with switch• Rugged table top cabinet SafetyAll metal cabinetHigh quality double wound HV transformerGood quality components and hardwareExtra EARTH Post Provided Standard Accessories a) Mains cord 2 meter long: 1 Number.b) HV test leads 1 meter long: 1 Set.c) Remote HV test lead with switch: 1 Number.

These are suitable for testing electrical insulation of condensers, plastic line tanks, electric cables, PIV of diodes and many other items and particularly motors, transformers, switch gears etc and particularly applicable for testing electrical equipment at site where portability is vital Generally available in one unit and sets for higher output voltage are available in two units. However, in case if required sets in more than two units can also be manufactured. Input: 230V, 50Hz AC (Sets with other voltage and frequency can also be made) Output: Continuously variable from zero to max. rated output voltage Sets with 5kV to 100kV output voltage can be made with current capacities upto 100mA. capacity: Available in different standard current capacities of 3mA, 5mA, 10mA, 20mA, 30mA, 50mA and 100mA can be made AC and DC combined high voltage sets are also available. Complete with power chord, instruction manual and test certificate

We are offering moving coil meter. Moving iron instruments are generally used for measuring ac voltages and currents. A feature of the moving element is that it is fitted with synthetic sapphire jewels. The movement is light and quick-acting, but extremely robust. An efficient system of fluid damping is employed. The movement is efficiently shielded against the effect of external magnetic fields. Moving coil instruments are used for measuring dc values. They can be used too on ac systems , if the input is fed through bridge rectifiers. A centre magnet system is incorporated in our moving coil instruments which completely shields the movement from the effect of external magnetic fields. The movement is pivoted between synthetic sapphire jewel bearings for frictionless operation. The above meters can be used for higher ranges by using necessary current and potential transformers, and external shunts, accuracy class: 1 to 1.5% as per iss 124883, we also manufacture.

Description :-Voltmeter is an instrument commonly used for measuring the voltage between two points in an electric circuit. It also measures differences of electric potential in volts or units that are fractions or multiples of volts. A voltmeter can also be considered as a very high resistance ammeter as voltage can be measured by allowing it to pass current through a resistance.The instrument is usually combined with an ammeter and an ohmmeter in a multipurpose instrument. Most voltmeters are analog types and based on a galvanometer.

This machine uses High voltage to test pin hole in partition and base of plastic molded parts. It can detect pin holes which cannot be seen.

Non-metallic contact Ideal for 70 to 1000 V installations

• Feature: Audio + Visual indication of status of test LIGHT WEIGHT; Single unit construction.

We are the leading supplier of this products.

• Voltage: 0 – 5 kV
• Current: 0 – 5, 10, 25, 50, 100, 200mAmps
• Time Setting: 0 to 60 Sec.

We are the leading supplier of this products.

Single Phase and Three Phase Microprocessor controlled AVR using state of the art solid state (static) technology. No maintenance and very fast voltage stabilising (1250Vsec) means the Sollatek AVR is greatly superior to the common Servo stabilisers. The Sollatek AVR is used around the world by MNCs who are serious about protecting and providing their valuable and sensitive equipment with safe and reliable mains poweThe AVR saves energy if your incoming voltage supply is greater than 230V, while decreasing use of Gensets since your machinery will be able to operate at a much wider incoming voltage supply of 230V +- 30%. r.

ANALOGUE METER WITH MOVING COIL MOVEMENT - DS(FEATURES & BENIFITS):Scale interchangeability.Linear scale.Glass filled polycarbonate housing Knife edge pointer. Easily replaceable glass and bezel.

VRP Three Phase 230/400 V : VRP three-phase units are available in following standard sizes: 9, 15, 22.5, 30, 45, 60, 75, 90, and 105 kVA and rated for 230/400 V at 50/60 Hz. Units may also be configured for 220/380 and 240/415 V. Other sizes available on request. The control PCB assembly is connectorized for easy replacement. 

• Brand Name: Selec
• Country of Origin: Made in India
• Model Name/Number: MV205
• Rated Input Voltage: 50 to 480V AC
• Supply Voltage: 240V AC
• Electrical Connection: 1P-2W
• Display: 3 Digits, 7 Segment LED

• Input: Powered from Battery Under Test
• Measurement: 6V to 32V
• Size: 95 x 70 x 20
• Weight: 0.2k.g

Now a days vehicle percentage is increased much. To keep the battery in good health condition it is necessary for vehicle charging system to work properly. Kanaad battery voltmeter is easy to use vehicle charging system monitor. It tells user whether the charging system is working properly or not with visual indications. Battery voltmeter can be used to function as regular voltmeter or as a vehicle charging system monitor using selection switch provided on front. In Charging system monitor mode it gives visual indication of battery UnderCharging and OverCharging. This system can work for both 12V and 24V systems.

• Type: CP Voltmeter
• Display Type: Analog Only
• Measuring Range: According to customer demand
• Accuracy Class: 2.5
• Operating Temperature: 0-40℃
• Dimensions: 82.5mm
• diameter: 82.5mm

Automatic Voltage Regulators, protective relays, gateways

lm350k linear voltage regulator ic, Ultra Fast Diode, bdw92 power transistor

Voltage Regulator, Voltage Stabilizer, Automatic Voltage Regulator

Analogue Panel Voltmeters, Dc Energy Meter

Voltmeter, analogue meters, Digital Ammeter, Frequency Meter, pf meter