Wall Putty Dealers in Sakinaka, Mumbai

• Features: Provide perfect seal , Low viscosity , Rapid curing.
• Grade: Industrial

Terroza Putty is water resistant white cement based putty for cement, plaster walls & ceilings. Terroza Putty can be applied even on moist surfaces (Internal / External).   It has more adhesive strength, durability & increases the life of paints. Terroza Putty though white cement based, does not require water curing. It renders a smooth & durable surface suitable for all kinds of paints.     Application Procedure   Surface preparation Remove all the loose adhering material from the wall surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quality of clean water.   Mixing of Terroza Putty Mix Terroza Putty with 35-40% clean water slowly to make a paste. Continue the mixing of material for 10-15 minutes till a uniform paste is formed. It is readymade wall putty for which no primer is required.   Application on surface Apply first coat of Terroza Putty uniformly on already moistened surface with the help of putty blade or trowel. Allow the surface to dry for at least three hours and then apply a second coat of putty. Leave the surface to dry completely. Always prepare the required quantity of Terroza Putty and use it within three hours of mixing with water. The total thickness of both the coats should be limited to a maximum of 1.5 mm. After complete drying of the surface, if needed, the surface should be rubbed with fine waterproof emery paper. The surface is now ready for painting.   Precautions while using Though it contains only non toxic materials still care should be taken to avoid dust inhalation while mixing and handling. in case of contact with eyes or mouth, wash with plenty of water.   Keep it in dry place and out of reach of children.   Storage Terroza Putty should be stored in a dry place.   Packing Terroza Putty is available in 20 Kg & 40 Kg. Packs.   Note :The information given in this Leaflet is for general guidance only. Specific instructions for various site conditions can be provided on demand. However the company will not be responsible for any wrong application of the product

Plug n Dike is a ready mixed bentonite putty that is ready to use straight from the tub/bucket. Plug n Dike seals off fuels, solvents and many other chemicals. Plug N Dike seals immediately and sticks to dirty, crumpled surfaces even with the fluid flowing out - No surface preparation is required. It is not a permanent seal as it will crack and dry out after a while. It will hold between 1-2 metres of head pressure. USE for : Punctured drums / Leaking pipelines / Vehicle accidents / Damaged fuel tankers   There are a number of factors and issues to consider when designing, resourcing and locating spill kits and response equipment. Selecting the right equipment for the appropriate risk response, the amount required for containment/clean-up and how it is to be stored and accessed, are just a few considerations to be addressed. There are also a range of products available to suit the type and risk, of fluid spilt and components can be altered to suit the particular situation. Determine which liquids may be spilt and then which type of absorbent you require. Whilst we have a standard range of kits, we can manufacture custom made units to client's requirements.   The basic five types of spill kits in our range are:- Hydrocarbon (Oil & Fuel) only Spill Kit - Hydrocarbon Kits are designed to recover oils & fuels in and around water and wet conditions without absorbing the water.\ General Purpose Spill Kit - These kits have absorbents that will deal with both water based non-hazardous liquids (coolants, water based paints etc) as well as hydrocarbons. Acid/Alkali Neutralizer Spill Kit- containing specific purpose neutralizer absorbent powders. Special Fluid Spill Kit - recommended for specific risk liquids such as body fluids, mercury, formaldehyde etc and contain absorbents to best handle these fluids. Chemical Spill Kit - is best for most chemical liquids such as acids, bases and general chemicals but can also still absorb hydrocarbons and general fluids.    

We are offering wall care putty pp bag.

We are offering wall putty. Technical details precautions drying time @ 30°c the information provided in this data sheet is not intended to be complete. It is the responsibility of the user to ensure that the product used is suitable for the purpose it is meant to serve. In view of various factors affecting the performance of the coating, we cannot assume responsibility for the product performance, nor do we accept any liability arising from use of this product, unless specifically agreed to in writing by us. The information provided in the datasheet may be modified by us without notice. Orchid wall putty surface dry touch dry recoatability hard dry 30 minutes 1 hr 8 - 10 hrs 24 hrs finish solids pot life shelf life recommended dft theoretical coverage practical coverage smooth & matt 100 ± 2% 45 - 60 minutes 6 months from the date of manufacturing in original sealed bags, with proper storage condition. 1.0 ~ 1.2 mm depending on the surface roughness 20 -22 sq ft kg practicle coverage may depend on surface profile, method of application and weather conditions

ACRYLIC WALL PUTTY is a state of the art smooth ready to use acrylic finishing plaster for interiors in paste form. It has excellent adhesive property, which eliminates the use of other products like neeru, solvent based putty, plaster of paris or primer before application of paint.It is specially formulated by using ultrafine minerals, biocides, and alkali resistant superior acrylic polymer. The unique processing technology of this product ensures smoothness and consistency. The special binder used in this putty imparts a strong adhesion to the wall surface thus increasing the life of the paint film

• Brand Name: steptex
• Packaging Details: 30 kgs
• Model Number: cement and acrylic wall putty and texture paint
• Supply Ability: 300 Bag/Bags per Day

PRODUCT COMPOSITION:It is a fluid-applied, as a advanced acrylic elastomeric, designed to waterproof exterior vertical surfaces. It possesses outstanding adhesion to a wide variety of substrates. HOW IT WORKS: It cures the surface in two stage mode. First it deflects the ultraviolet light from the exposed surface because of which the sub surface is protected from further cross linking & retains the permanent elastomeric bond of the substrate. This eliminates the need for any new & separate application on the surface to repel dirt, mildew & pollution without sacrificing the flexibility of the substrate. It will act as a flexible breathing membrane allowing moisture & vapor to escape from the substrate or surface interior through the coating while remaining impervious to mass water penetration from the external side. It contains no plasticizers because of which the surface won’t harden or slump with age or changes in temperature.

MagicPlast - Wall Putty is a polymer modified white cement based wall putty specially developed as a finishing coat to cover the unevenness and pinholes created by plastering and to prepare the wallsurface for painting. It can also be treated as a base coat for painting.

cement wall putty, thinner, Paint, Paint Remover, Industrial Thinner

polyester fiber putty, automobile coatings, Fire Retardant

We are successfully ranked amongst the top traders and suppliers of shakti acrylic wall guard putty.

polyster putty, Car Paints, Primer

Epoxy Putty, Cable Jointing Kits, cable potting compounds, Epoxy Resin

therapeutic putty, Rolyan Tubing, Elbow CPM Machine, Shower Seats, toe cap

birla white putty, Cement

SMART WALL PUTTY, plasters, Flush Doors, western doors, connecting clip

polyster putty, Marble

White Cement Wall Putty

Wall Putty, Polymer

Fyre Putty, Ropes, Textiles, Blankets, Vacuum Formed Component

wall putty powder, Gypsum False Ceiling, PVC False Ceiling

Wall Putty, White Cement, Gypsum Plaster, Acrylic Distemper

Wall Putty, commercial paints, colours, Textured Plaster

Epoxy Putty, Paint, paint allied products